Electrolux RCDR4M32U User Manual

Identification:
Technical Bulletin:
Date: Issuer: Factory:
Subject Model
Problem Reason
Action in Factory
Salt Container in UC/FL/HT
Undercounter double skin, Front Loading and Hood Type high capacity with continuous water softener built-in (LS6EADPWS / WT38WS, LU7ADPWS / WTU40ADPWS and LS14EAWS / WT65WS).
Water leakage. The cap is not closed properly because of too short thread (bad sealing
causes water leakage because the salt container is under pressure while the machine makes resins regeneration).
We have introduced:
a warning label from September 2007
a ring nut + longer thread for the salt container (to keep it aligned and in
touch with the frontal panel) from serial number 80700001.
D02-D03-D04
CGX2008-04 (page 1 of 3)
From serial number 80800001 we have also removed the rinse aid container. Of course this means that frontal panels are changed too.
The “old” salt container 0L0763 is replaced by:
ELECTROLUX PROFESSIONAL SPA MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30 33170 PORDENONE - ITALY
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30 33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
++39 0434 380636 ++39 0434 385646
Share more of our thinking at www.electrolux.com
riccardo.sartor@electrolux.it
Technical Bulletin (Salt Container).doc
Salt container
Gasket 0L1691
Ring Nut 0L1693
Kit salt container + gasket + ring
nut
Frontal panel Undercounter
Up to serial number
80600099
With rinse aid container
0L1694
With rinse aid container
0L1753
(= 0L1694 + 0L1691 + 0L1693)
0L0743
From serial number
80700001
Without rinse aid container
0L1692
Without rinse aid container
n.a.
0L1688
LS6EADPWS / WT38WS
With holes for the badge
Frontal panel Undercounter
LS6EADPWS / WT38WS
Without holes for the badge
Frontal panel Front Loading
LU7ADPWS / WTU40ADPWS
With holes for the badge
Frontal panel Hood Type
LS14EAWS / WT65WS
0L1686
0L1690
0L1447 0L1687
0L0798 0L1689
Share more of our thinking at www.electr olux.c om
2
Loading...
+ 1 hidden pages