RANGE
COMPOSITION
The range consists of 5 sinks, with all-round
apron panelling, 700, 1200 or 1400 mm in
length, and with a single bowl.
LG1416SX+TAP
HD SINGLE BOWL SINKS ON LEGS
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Worktop in 12/10, 304 AISI stainless steel,
50 mm in thickness and with overflow rim
along the top; the worktop has welded
corners.
� Sink bowl in 304 AISI stainless steel,
supplied as standard with an overflow pipe
and a drain hole; the bowl is seam welded
and polished, the base is inclined towards
� Rear splashback with 10 mm rounded
corner, 100 mm in height and 13 mm deep.
� Round section legs with 50 mm Dia.
height-adjustable (-60 +10 mm) feet in 304
AISI stainless steel to guarantee perfect
alignment with other food preparation
equipment. For an easy installation(in case of
external pipes o other connections) legs are
mounted at 80 mm from the edge of table
top. All-round apron panelling in 304 AISI
stainless steel.
� Quick and easy installation as the Taps
are easily installed from the rear.
� Accessories available on request: lower
shelf, tap unit, false bowl bottom, overflow
filter, single or double syphons.
� A 50 mm thick lower shelf, in 304 AISI
stainless steel, can be easily slotted into
position, 200 mm from the floor. The shelves
are supplied in solid versions as standard,
with louvered shelves supplied on request.
� All modelscomply with the more strict
international standards as far as hygiene and
cleanability are concerned.
ZANUSSI
P R O F E S S I O N A L
the drain outlets.
TECHNICAL DATA
CHARACTERISTICS MODELS
LG716
131447
External dimensions - mm
width 700 1200 1200 1400 1400
depth 700 700 700 700 700
height 900 900 900 900 900
Worktop thickness - mm 50 50 50 50 50
Upstand dimensions - mm
height 100 100 100 100 100
depth 13 13 13 13 13
radius R=10 R=10 R=10 R=10 R=10
Bowls - n. 1 1 1 1 1
Bowl dimensions (wxdxh) - mm 500x500xH300 600x500xH300 500x500xH300 600x500xH300 600x500xH300
Net weight - kg. 20 42 42 46 46
LG1216DX
131449
LG1216SX
131450
LG1416DX
131452
LG1416SX
131453
131447
155
297,5
131449, 131450
595
700
700
700
155
272,5 272,5
Ø29
150
700
595
297,5
Ø29
1400
155
155
71.5
190
850
580
440
C
80 20
700
100
50
300
900
700700
Ø29
1200
595
155
297,5
71.5
185
850
550
440
C
1200
Ø29
71.5
185
80 20
700
50
100
300
900
131452, 131453
185
71.5
71.5
850
550
440
190
80 20
C
700
595
297,5
Ø29
100
50
300
900
1400
LEGEND
LG716
131447
LG1216DX
131449
LG1216SX
131450
LG1416DX
131452
LG1416SX
131453
A - Hot water inlet 3/4" 3/4" 3/4" 3/4" 3/4"
B - Cold water inlet 3/4" 3/4" 3/4" 3/4" 3/4"
C - Water drain 2" 2" 2" 2" 2"
OPTIONAL ACCESSORIES
ACCESSORIES MODELS
ELBOW OP.MIXER TAP+SPOUT-3/4"SINGLE HOLE 855322 855322 855322 855322 855322
ELBOW OP.TAP+SPRAY ARM+SPOUT-3/4" HOLE 855324 855324 855324 855324 855324
FALSE BOTTOM FOR L/H 600X500 MM BOWL 895110 895110 895110
FALSE BOTTOM FOR R/H 600X500 MM BOWL 895100 895100
FOOT OP.MIXER TAP(HOT+COLD)+SPOUT-3/4" 855328 855328 855328 855328 855328
LOWER SHELF FOR 1200 MM UNITS 855021 855021
LOWER SHELF FOR 1400 MM UNITS 855023 855023
LOWER SHELF FOR 700 MM UNITS 854004
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 10M 855320 855320 855320 855320 855320
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 15M 855321 855321 855321 855321 855321
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 6M 855327 855327 855327 855327 855327
MIXER TAP W/FOOT PEDAL FOR SINKS ON LEGS 855317 855317 855317 855317 855317
MIXER TAP WITH SPOUT 3/4" SINGLE HOLE 855319 855319 855319 855319 855319
MIXER TAP(PREMIUM)+SPRAY ARM-3/4" HOLE 855326 855326 855326 855326 855326
MIXER TAP+SPRAY ARM+SPOUT-3/4" SING.HOLE 855329 855329 855329 855329 855329
OVERFLOW FILTER FOR 600X500 MM BOWL 895135 895135 895135 895135 895135
PRE-WASH SPRAY UNIT,SINGLE HOLE 855315 855315 855315 855315 855315
SINGLE BRASS SYPHON 2" 895314 895314 895314 895314 895314
SINGLE PLASTIC SYPHON 2" 895313 895313 895313 895313 895313
WALL MIX.TAP+SPRAY+SPOUT+SH.LEVER+THERM 855307 855307 855307 855307 855307
WALL MIXER TAP WITH SWIVEL SPOUT 3/4" 855310 855310 855310 855310 855310
LG716
131447
LG1216DX
131449
LG1216SX
131450
LG1416DX
131452
LG1416SX
131453
ZANUSSI
P R O F E S S I O N A L
www.zanussiprofessional.com
ABEC1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.