Electrolux GC1G20D5B User Manual

Modular Cooking Range Line

S90 Heavy Duty 4-Burner Gas

Range Wallmounted with C-Board

Modular Cooking Range Line

ITEM #

MODEL #

NAME #

SIS #

AIA #

Main Features

•Unit for wall mounted type installation with operations by

chef from one side only (knobs on one side of the console).

•The two 5 kW and two 7 kW high efficiency burners suit high

performing cooking requirements for the most demanding
customers.

•Manual gas valves with fixed high and low positions allow

precise control of the flame intensity.

•Large sized pan support in cast iron (stainless steel as

option) with long center fins to allow the use of the largest
down to the smallest pans.

•Flat deep drawn spillage area with removable pan supports,

burner rings and flame ignition parts.

•Heavy duty internal frame in 304 type Stainless steel with

reinforcement on top of 3 mm.

•3 mm top in 304 type Stainless steel.

•“Lasertec connection system” creates seamless work top

when units are connected to each other.

•Raised rear C-Board permits unit to be connected up against

the wall for better hygiene.

•Unit delivered with four 200 mm legs as standard (all round

Stainless steel kick plates as option).

S90 Heavy Duty 4-Burner Gas Range Wallmounted with C-

S90 Heavy Duty 4-Burner Gas Range
Wallmounted with C-Board

584243 (GC1G20D5B)S90 4 OPEN GAS BURNERS

(82,000 BTU), WALL
MOUNTED, CB, 1SIDE
OPERATION

Short Form Specification

Item No.

Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000
BTU (7 kW) burner gas range. Unit to be installed as wall mounted with
operations from one side. High efficiency burners with continuous power
regulations to high power of 82,000 BTU’s (24 kW). Thermocouples as
standard on burners for added safety. Unit to have raised rear c-board for
against the wall or back to back unit installation. Body of unit entirely in 304
Stainless steel. Pan supports in heavy duty cast iron. Unit shall have heavy
duty 304 Stainless steel internal frame with reinforcement on the top of 3
mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other
creating a seamless work top.

Included Accessories

•1 of Kit for wall mounted installation for

units 400mm high, 400mm

•4 of Cast-iron pan rest for 3,5-5-7Kw

burner, 430x380mm

PNC 911603

PNC 911912

Optional Accessories

•Solid top plate for open burner,

360x360mm

•Flexible connection hose 3/4"PNC 910720 ❑

•Pan rest CNS, 430x380mmPNC 910729 ❑

•Kit for wall mounted installation for units

700mm high

•Lower side panel (300mm) for wall

mounted installation for units 700mm
high, leftside

•Lower side panel (300mm) for wall

mounted installation for units 700mm
high, rightside

•Portioning shelf, 1000mm widthPNC 911856 ❑

•Portioning shelf, 1000mm widthPNC 911878 ❑

PNC 910718 ❑

PNC 911670 ❑
PNC 911671 ❑

PNC 911672 ❑

Modular Cooking Range Line

APPROVAL:

Board

Electrolux Professional

www.electrolux.com/foodservice

[e-mail]

Modular Cooking Range Line

S90 Heavy Duty 4-Burner Gas

Range Wallmounted with C-Board

Front

Gas

Gas Power:

584243(AGGWOIGJOO)81816 Btu/hr (24 kW)

Gas Type Option:
Gas Inlet:3/4" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)

Natural Gas;Butane/Propane;
Town Gas on request

Key Information

Net weight:100 kg
Shipping weight:120 kg
Shipping height:400 mm
Shipping width:1000 mm
Shipping depth:900 mm
Shipping volume:0.66 m³

If appliance is set up or next to or against temperature sensitive
furniture or similar, a safety gap of approximately 150 mm should be
maintained or some form of heat insulation fitted.

Top

EQ=Equipotential screw

G=Gas connection

Side

S90 Heavy Duty 4-Burner Gas Range Wallmounted with C-Board

The company reserves the right to make modifications to the products

without prior notice. All information correct at time of printing.

Modular Cooking Range Line

2009.10.24