Electrolux GC1G11C1B User Manual

Modular Cooking Range Line

S90 Heavy Duty 2-Burner Gas

Range on Open Base C-Board

ITEM #

MODEL #

NAME #

SIS #

AIA #

Main Features

•The one 5 kW and one 7 kW high efficiency burners suit high

performing cooking requirements for the most demanding
customers.

•Large sized pan support in cast iron (stainless steel as

option) with long center fins to allow the use of the largest
down to the smallest pans.

•Open base compartment for storage of pots, pans, sheet

pans, etc.

•Flat deep drawn spillage area with removable pan supports,

burner rings and flame ignition parts.

•Heavy duty internal frame in 304 type Stainless steel with

reinforcement on top of 3 mm.

•3 mm top in 304 type Stainless steel.

•“Lasertec connection system” creates seamless work top

when units are connected to each other.

•Raised rear C-Board permits unit to be connected up against

the wall for better hygiene.

•Unit delivered with four 200 mm legs as standard (all round

Stainless steel kick plates as option).

S90 Heavy Duty 2-Burner Gas Range on Open Base C-Board

Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range on

Open Base C-Board

584240 (GC1G11C1B)S90 2 OPEN GAS BURNERS

(41,000 BTU), OPEN BASE,
CB, 1SIDE OPERATION

Short Form Specification

Item No.

Unit to be Electrolux S90 Heavy Duty one 17,000 BTU (5 kW) and one 24,000
BTU (7 kW) burner gas range on open base. High efficiency burners with
continuous power regulations to high power of 41,000 BTU’s (12 kW).
Thermocouples as standard on burners for added safety. Unit to have raised
rear c-board for against the wall or back to back unit installation. Body and
open base of unit entirely in 304 Stainless steel. Pan supports in heavy duty
cast iron. Unit shall have heavy duty 304 Stainless steel internal frame with
reinforcement on the top of 3 mm. Extra strength work top in heavy duty 3
mm Stainless steel. “Lastertec” connection system permits units to be
connected to each other creating a seamless work top.

Optional Accessories

•Shelf for one side open bases and hot

cupboards, W=500mm, thermaline
800&900

•Side panel, wall mounted or against the

wall, right (units 700mm high)

•Side panel, wall mounted or against the

wall, left (units 700mm high)

•Stainless steel front kicking strip, 500mm PNC 911555 ❑

•Stainless steel kicking strips, against wall

installation, left and right

•Portioning shelf, 500mm widthPNC 911851 ❑

•Portioning shelf, 500mm widthPNC 911873 ❑

•Shelf fixation kit for open and hot base, GN

1/1, 1 side operated

PNC 910777 ❑

PNC 911528 ❑
PNC 911530 ❑

PNC 911639 ❑

PNC 911914 ❑

Modular Cooking Range Line

APPROVAL:

Electrolux Professional

www.electrolux.com/foodservice

[e-mail]

Modular Cooking Range Line

S90 Heavy Duty 2-Burner Gas

Range on Open Base C-Board

Front

Gas

Gas Power:

584240(AGGRAFGOOO)40908 Btu/hr (12 kW)

Gas Type Option:
Gas Inlet:3/4" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)

Natural Gas;Butane/Propane;
Town Gas on request

Key Information

Storage Cavity Dimensions
(width):340 mm

Storage Cavity Dimensions
(height):358 mm

Storage Cavity Dimensions
(depth):738 mm

Net weight:70 kg
Shipping weight:90 kg

Top

Shipping height:900 mm
Shipping width:500 mm
Shipping depth:900 mm
Shipping volume:0.55 m³

If appliance is set up or next to or against temperature sensitive
furniture or similar, a safety gap of approximately 150 mm should be
maintained or some form of heat insulation fitted.

EQ=Equipotential screw

G=Gas connection

Side

S90 Heavy Duty 2-Burner Gas Range on Open Base C-Board

The company reserves the right to make modifications to the products

without prior notice. All information correct at time of printing.

Modular Cooking Range Line

2009.10.24