Electrolux EW30IS6CJS User Manual
Induction Built-In Range
EW30IS6CJS
Featuring Wave-Touch®Controls & Induction Cooktop
30" INDUCTION BUILT-IN RANGE
Control Panel Features
Wave-Touch®Electronic Oven Control
Perfect Set®Element Controls
eypad Entry of Time & Temperature
K
lectronic Clock & Timer
E
emperature Display
T
utomatic Oven (Delay, Cook & Off)
A
Induction Cooktop Features
Ceramic Glass Smoothtop
0" Induction Cooking Element – 2500W /3400W
1
8" Induction Cooking Element – 2400W /3400W
7" Induction Cooking Element – 1900W /2600W
6" Induction Cooking Element – 1500W /1900W
ot-Surface Indicator Light
H
urface Controls
S
Oven Features
Capacity
Hidden Bake Element
ight-Pass Bake Element – 2500 Watts
E
ight-Pass Broil Element – 4000 Watts
E
Convection Element – 2500 Watts
Cobalt Blue Interior
elf-Clean Options with Door Lock
S
erfect Convect
P
Cooking Modes –
Bake, Broil, Convection Bake, Convection Roast,
Convection Broil, Keep Warm, Slow Cook
Baking Options –
Perfect Turkey
More Energy-Efficient
Cooking with induction is 70% more efficient
than gas and 20% more efficient than electric.
More Responsive
Cooking with induction is more responsive
than gas or electric — you can instantly adjust
the heat to a delicate simmer or bring it to
a quick boil.
Exceptional Temperature Control
Adjust heat with greater accuracy than gas or
electric cooktops, especially at lower settings.
Perfect for melting chocolate and cooking
delicate foods and sauces.
Cooking Flexibility
The sensors automatically detect the presence
of magnetic cookware, activate the induction field
and adjust it to the exact size of the pan.
My Favourites, Multi-Stage Cooking, Temperature Probe,
Rapid Preheat, Delay Bake, Convection Convert
Luxury-Design®Lighting withDual 40W Halogen Bulbs
uxury-Glide
L
Conventional Racks
Convection Roasting Rack
Additional Features
Luxury-Hold™Oven Door
Extra-Large Glass Window
Perfect Pair Lower Oven
Adjustable Leveling Legs
Sabbath Mode (Star-K®Certified)
Accessories
Porcelain Broiler Pan and Insert
Cleaning Sponge
2" Rear Filler Kit, Side Panel Kit, Backguard Kit,
Side Trim Kit – See Back for Part Numbers
Specifications
Colour –
Stainless Steel
Oven Cavity Dimensions –
Height
Width
Depth
Product Dimensions –
Height (Adjustable)
Width
Depth (to Center of Arc)
(with 90° Door Open)
Power Supply Connection Location
Connected Load (kW Rating) @ 240 /208 Volts
Amps@ 240/ 208 Volts
Minimum Circuit Required (Amps)
Shipping Weight (Approx.)
NOTE: Always consult local and national electric codes. Refer to Product Installation Guide
for detailed installation instructions on the web at electroluxappliances.ca.
Specifications subject to change.
®
3
ith Variable 2-Speed Fan
w
®
, Defrost, Dehydrate, Bread Proof,
®
acks
R
®
Yes
Yes
es
Y
es
Y
es
Y
es
Y
Yes
1
1
1
1
es
Y
es
Y
4.2 Cu. Ft.
Yes
es
Y
es
Y
Yes
Yes
3
es
Y
7
10
Yes
2
1
Yes
Yes
Yes
Yes
Yes
Yes
Included
Included
Optional
S
16-1/2"
24-1/8"
18-1/32"
35-5/8" – 36-5/8"
30"
28-5/16"
45-1/2"
Left Bottom Rear
13.2/ 9.9
55/ 48
50
258 Lbs.
electroluxappliances.ca
Induction Built-In Range
EW30IS6CJS
30" Induction Built-In Range Specifications
•
Product Weight – 238 Lbs.
•
Single phase 3- or 4-wire cable, 120 /240 or 120/ 208 Volt, 60 Hertz,
fused on both sides of line with ground. (If local code permits, range may
be connected by hard-wiring or by means of power supply cord kit.)
•
Connected Load (kW Rating) @ 240 / 208 Volts = 13.2 / 9.9 kW
•
Amps @ 240/ 208 Volts = 55 / 48 Amps
•
Recommended Circuit Breaker – 50 Amps
•
Always consult local and national electric codes.
•
Countertop MUST be level in all directions and adjustable range
height at least 1/16" greater than tallest cabinet height, to ensure metal
rangetop flange will fit properly on countertop edge.
•
When installing optional Backguard Kit, cutout depth of 21-3/4"
minimum / 22-1/8" maximum needs increased to 24".
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum width
of appliance.
•
Allow 24" minimum clearance between rangetop and bottom of cabinet
when bottom of wood or metal cabinet is protected by not less than 1/4"
flame-retardant millboard covered with not less than No. 28 MGS sheet
steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. Allow
30" minimum clearance when cabinet is unprotected.
•
To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond bottom
of cabinets.
•
When installing range into existing cutout depth greater than 22-1/8",
optional 2" Rear Filler Kit available.
Countertop Preparation
For detailed preparation instructions, refer to installation guide on the web.
•
Flat square-finish (flat) countertop requires no preparation since rangetop
flange lays directly on countertop edge.
•
Formed front-edged countertops require front molded edge to be shaved
flat 3/4" from each front corner of opening.
•
Tile countertops may need cut back 3/4" from each front corner of
opening and/ or rounded edge flattened.
•
For existing cutout width greater than 30-1/16" reduce the 3/4" overlap
dimension or for cutout width of 29", replace actual side trim panels with
smaller side trim panels, available with optional Side Trim Kit (refer to
detailed kit installation instructions).
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.ca for detailed instructions.
Optional Accessories
•
2" Rear Filler Kit: S – (PN # 903113-901S).
•
Side Panel Kit: S – (PN # 903102-901S).
•
Backguard Kit: S – (PN # 903111-901S).
•
Side Trim Kit: S – (PN# 903110-901S).
Electrolux Major Appliances, N.A.
•
CANADA
EW30IS6CJ 05/11 © 2011 Electrolux Major Appliances, NA Printed in Canada
5855 Terry Fox Way•Mississauga, ON L5V 3E4•1-800-265-8352
•
electroluxa pplia nces. ca
High standards of quality at Electrolux Major Appliances mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Loading...