Electrolux ETV45000X User Manual

user manual

LCD Television 19"

ETV45000X

Contents

Features ............................................................... 4

Accessories ......................................................... 4

Introduction ........................................................... 5

Preparation ........................................................... 5

Safety precautions ............................................... 5

Child safety: ...................................................... 5

Power source ................................................... 5

Information for users in European Union

countries ........................................................... 6

Headphone Volume ........................................... 7

Installation ......................................................... 7

LCD screen ....................................................... 7

When unused ................................................... 7

Overview of the remote control ........................... 8

LCD TV and operating buttons ............................. 9

Viewing the connections .................................... 10

Power connection .............................................. 12

Aerial connection ............................................... 12

Connecting the LCD TV to a PC .......................... 13

Connecting to a DVD player ............................... 14

Using other connectors ...................................... 15

Connecting other equipment via scart ................ 16

Inserting batteries in the remote control handset 17

Operating range for the remote control .............. 17

Switching the TV on/off ..................................... 18

To switch the TV on ....................................... 18

To switch the TV off ....................................... 18

Input selection .................................................... 18

Basic operations ................................................ 19

Operation with the Buttons on the TV ............ 19

Volume setting ............................................. 19

Programme selection ................................... 19

Entering main menu ..................................... 19

AV mode ..................................................... 19

Operation with the remote control .................. 19

Volume setting ............................................. 19

Programme selection (Previous or next

programme)................................................. 19

Programme selection (Direct access) ......... 19

Initial settings ...................................................... 20

General operation ............................................... 20

Information Banner ......................................... 20

Electronic programme guide (EPG) ................. 21

Displaying the subtitles ................................... 22

Digital teletext .................................................. 22

Over air download.......................................... 23

Widescreen .................................................... 23

IDTV menu system ............................................. 23

Channel list ..................................................... 23

Navigating the entire channel list ................. 24

Deleting the channels in the channel list ..... 24

Renaming channels..................................... 24

Adding locks to channels ............................ 24

Setting Favourites ....................................... 25

On Screen Help ........................................... 25

Installation ....................................................... 25

Add new channels ..................................... 26

Automatic Search ................................. 26

Manual Search ...................................... 26

Configuration .................................................. 27

Audio language ........................................... 27

Subtitles .......................................................... 27

Favourite mode ........................................... 27

EPG preference .......................................... 28

Receiver upgrade ....................................... 28

Automatic download (Automatic upgrade)
28
Search for new version (Manual

Upgrade) ............................................... 28

Parental settings ......................................... 28

Timers ............................................................. 29

Language ........................................................ 30

TV setup ......................................................... 30

Common Interface ........................................... 30

Analogue TV menu map ..................................... 32

Navigating the analogue TV menu system .......... 33

Analogue TV menu system ................................ 33

Sound Menu.................................................... 33

Volume ........................................................ 33

Balance ....................................................... 33

Sound mode ................................................ 33

AVL ............................................................. 33

Effect .......................................................... 33

Equalizer ..................................................... 34

HP volume ................................................... 34

Store ........................................................... 34

Picture menu ................................................... 34

Picture mode ............................................... 34

Brightness/contrast/colour/ ......................... 34

sharpness/tint ............................................. 34

Colour temp ................................................. 34

Room lighting ............................................... 34

Picture zoom ............................................... 34

Store ........................................................... 34

Features menu ................................................ 35

Sleep timer .................................................. 35

Language .................................................... 35

Child lock ..................................................... 35

Menu colour ................................................ 35

Favourite mode ........................................... 35

Install menu ..................................................... 35

Programming ............................................... 35

Programme............................................ 35

Band ..................................................... 35

Channel ................................................. 35

Standard ............................................... 36

Colour system ....................................... 36

Search .................................................. 36

English - 2 -

VCR Mode ............................................. 36

Decoder ................................................ 36

Store ..................................................... 36

A.P.S. .......................................................... 36

A.P.S. country ............................................. 36

Teletext region ............................................. 37

Install menu in AV modes ............................ 37

Programming ......................................... 37

Colour system ....................................... 37

Program table .............................................. 37

Name .................................................... 37

Move ..................................................... 37

Delete.................................................... 38

APS (Auto Programming System) ......... 38

Favourite mode ..................................... 38

Program lock ......................................... 38

Enter PIN ............................................... 38

PC Mode Menu System ....................................... 39

Displaying TV Information ................................... 40

Mute function ...................................................... 40

Personal preference .......................................... 40

Zoom modes ....................................................... 40

Teletext ............................................................... 41

Tips .................................................................... 42

Appendix A: PC Input typical display modes ....... 43

Specifications ..................................................... 44

Pin specifications ............................................... 45

Electrical connection .......................................... 46

Change PIN ........................................... 38

Sound menu.................................................... 39

Feature menu.................................................. 39

PC picture menu.............................................. 39

Geometry menu........................................... 39

H. (Horizontal) position .......................... 39

V. (Vertical) position ............................. 39

Clock ..................................................... 39

Phase.................................................... 39

Auto adjustment .................................... 39

Auto ............................................................ 40

4:3 ............................................................... 40

16:9 ............................................................. 40

Cinema ........................................................ 40

Subtitle ........................................................ 40

Screen care .................................................... 42

No power ........................................................ 42

Poor picture .................................................... 42

Input sources .................................................. 42

CI module ........................................................ 42

English - 3 -

Features

INFO

-/--

/

/

GUIDE

P+

M

• Remote controlled colour television.

• Fully integrated digital TV (DVB-T).

• 100 programmes from VHF, UHF bands or

cable channels can be preset.

• It can tune cable channels.

• Controlling the TV is very easy by its menu

driven system.

• It has a scart socket for external devices

(such as video, video games, audio set, etc.)

• Stereo sound system (Nicam).

• Fully functional teletext .

• Fastext (10 pages), top text.

• Favourite channel.

• Channel lock.

• Headphone connection.

• A.P.S. (Automatic Programming System).

• All programmes can be named.

• Forward or backward automatic tuning.

• Sleep timer.

• Child lock.

•Automatic sound mute when no transmission.

• NTSC playback.

• It has an HDMI connector for digital video

and audio. This connection is also designed

to accept high definition signals.

• AVL (automatic volume limiting).

• When no valid signal is detected, after 5

minutes the TV switches itself automatically

to standby mode.

• PLL (frequency search).

• PC input.

• Plug & Play for Windows 9X, ME, 2000, XP, Vista.

• Audio Line Out.

Accessories

Remote Controller

Instruction Book

OK

ABC DEF GHI

1 2 3

JKL MNO

5 6

4

VWX

STU

7 8 9

PP

0

P -

P<P

Batteries

2 X AAA

PQR

YZ

English - 4 -

Introduction

10 cm

Than k you fo r ch oos ing this

product. This manual will guide

yo u thr o u gh th e pr o p e r

operation of your TV. Before

operating the TV, please read this manual

thoroughly.

Please keep this manual in a safe place for

future references.

Preparation

For ventilation, leave a free space of at least

10 cm all around the set. To prevent any fault

and unsafe si tuations, please do not place

any objects on top of the set.

Use this device in moderate climates.

10 cm

10 cm

Safety precautions

Please read the following recommende d

safety precautions carefully for your safety.

Child safety:

This appliance is designed to be operated by

adults. Do not allow children to tamper with

the controls.

For your Safety

·All warning on the product and in this manual

must be observed.

·Never attempt to repair the product yourself.

·Take extra care not to be distracted by the

television while cooking or preparing food,

particularly when using hot or sharp objects.

Power source

The TV set should be operated only from a

220-240 V AC, 50 Hz outlet. Ensure that you

select the correct voltage setting for your

convenience.

Power cord

Do not place the set, a piece of furniture, etc.

on the power cord (mains lead) or pinch the

cord. Handle the power cord by the plug. Do

not pull out the plug by tugging the cord and

never touch the power cord when your hands

are wet as this could cause a short circuit or

electric shock. Never make a knot in the cord

or tie it with other cords. The power cords

should be placed in such a way that they are

not likely to be stepped on. A damaged power

cord can cause fire or give you an electric

shock. When the power

cord is d a m aged a n d

needs to be replaced, it

shou l d be done by

qualified personnel.

Moisture and water

Do not use this device in a

English - 5 -

humid and damp place (avoid the bathroom,

the sink in the kitchen, and near the washing

machine). Do not expose this equipment to

rain or water, as this may be dangerous and

do not place objects filled with liquids, such

as flower vases, on top of the set. Avoid from

dripping or splashing.

If any solid object or liquid

falls into the cabinet, unplug

the set and have it checked

by qu a l i f ied person n e l

befo r e o p e rating it a n y

further.

Cleaning

Before cleaning, unplug the adaptor from the

wall outlet . Do not use liq uid or aero sol

cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the back cover are

intended for ventilation and to

ensure reliable operation. To

preven t over heati ng, these

openings must not be blocked

or covered in anyway.

Heat and flames

The set should not be placed near to open

flames and sources of intense heat, such as

an electric heater. Ensure that no open flame

sources, such as lighted candles, are placed

on top of th e set. Batterie s

shou l d not be exp o s e d t o

exc essive heat su ch a s

sunshine, fire or the like.

Lightning

In case of storm and lightning or when going

on holiday, disconnect the power cord from

the wall outlet.

English - 6 -

Replacement parts

When replacement parts are required, make

sure on l y ge n uine spare parts are

used.Unauthorized substitutions may result in

fire, electrical shock or other hazards.

Servicing

Plea se refer all servici ng to

qu alif ied pe rsonnel . Do no t

remove the cover yourself as

this may result in an electric

shock.

Waste disposal

Instructions for Waste Disposal

• Pa cka ging and pa cka g ing

aids are recyclable and should

pri n c i pally be rec y c led.

Packaging materials, such as

foil bag, must be kept away from

children.

• Batteries, including those which are heavy

metal-free, should not be disposed of with

household waste. Please dispose of used

battery in an environment friendly manner.

Find out about the legal regulations which

apply in your area.

• Cold catho de fluo res cent lamp in LCD

PANEL contains a small amount of mercury;

please follow the local laws or regulations

for disposal.

Information for users in European
Union countries

This symbol on the product or on its packaging

means that your electrical and electronic

device should be disposed at the end of its

service life separately from your household

wa s t es. Ther e are separa t e c o l l e ction

systems for recycling in EU.

For more information, please contact the local

authority or the dealer where you purchased

the product.

Disconnecting the device

The mains plug is used to disconnect the TV

set from the mains and therefore it must

remain readily operable.

Headphone Volume

Excessive sound pressure from

earphones and headphones can

cause hearing loss.

Installation

To prevent injury, this device must be securely

attached to the wall in accordance with the

installation instructions when mounted to the

wall (if the option is available).

LCD screen

The LCD panel is a very high technology

pro d u c t wit h a b o ut a m i l l ion thin f i l m

transistors, giving you fine picture details.

Occasionally, a few non-active pixels may

appear on the screen as a fixed blue, green

or red point. Please note that this does not

affect the performance of your product.

When unused

Do not leave your TV at STANDBY or operating

when you leave your house.

English - 7 -

Overview of the remote control

DTV

INFO

-/--

SWAP

SOURCE

/

/

1012131415

16

P+

31

32

Standby

Cursor up

Cursor right

Info

Direct programme

Double digit/ No function

Programme up

Volume up

TV/Digital TV Mode

External source

Feature

Install

Hold/No function

Update/No function

Index page/Electronic

Programme Guide (EPG)

Reveal/Switch from TV to PC

Expand/Image size

Mix/No function

Teletext

Time/Subtitles on-off

Sound

Picture

Previous programme

Mono-Stereo/Dual I-II

Programme down

Volume down

Personal preference

Okay (Store)

Cursor down

Cursor left

Menu

Mute

32

31

30

29

28

27

26

25

24

23

22

21
20
19

18
17

English - 8 -

M

OK

ABC DEF GHI

1 2 3

JKL MNO

4

STU

5 6

VWX

7 8 9

PP

0

P -

P<P

TV

1

2
3

4

5

PQR

YZ

6

7

8

9

LCD TV and operating buttons

TV/AV

- P/CH +

MENUP/CHVOLUME

- VOLUME +

REAR VIEW

English - 9 -

MENUP/CHVOLUME

MENU

STAND-BY

Viewing the connections

Headphone jack is used for connecting an external headphone to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

Power Cable

PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

HDMI Inputs are for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Definition pictures from devices such as a

High Definition Satellite Receiver or DVD Player. These devices must be connected via the

HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals.

No sound connection is needed for an HDMI to HDMI connection.

Audio Line Out outputs audio signals to an external device such as an optional sound

system.

To connect the external speakers to your TV, use AUDIO LINE OUTof the TV with an audio

cable.

Component Audio Inputs are used for connecting component audio.

Connect the audio cable between COMPONENT AUDIO INPUTS on the TV and audio outputs

of your device.

English - 10 -

Component Video Inputs (YpBPr) are used for connecting component video.

You can connect the component video and audio sockets with a device that has component

output. Connect the component video cables between the COMPONENT VIDEO INPUTS on

the TV and the component video outputs of your device. W hile connecting, be sure that the

letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.

Use an appropriate RCA cable to connect the set to a subwoofer unit.

SCART 1 inputs or outputs for external devices.

RF Input connects to an antenna or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable

through the device to the television with an appropriate antenna cable, as shown in the

illustration below.

CI Slot .

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you

subscribe to. For more information, see “Common Interface” section.

English - 11 -

Power connection

Aerial Input

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you

connect the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

REAR VIEW

English - 12 -

Connecting the LCD TV to a PC

PC audio cable

(not supplied)

For displaying your computer ’s screen image on your LCD TV, you can connect your computer

to the TV set.

• Power off both computer and display before making any connections.

• Use 15-pin D-sub display cable to connect a PC to the LCD TV.

• When done, switch to PC source. See, “Input selection” section.

• Set the resolution that suits your viewing requirements.

PC RGB cable

(not supplied)

to PC RGB output

to component

audio input

English - 13 -

Connecting to a DVD player

SCART

cable

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer to your DVD player’s instruction book for

additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD

player as illustrated below, switch to HDMI source. See, “Input selection” section.

• Most DVD players are connected through COMPONENT SOCKETS. Use a component video

cable to connect video input. For enabling audio, use a component audio cable as illustrated

below. When done, switch to YPbPr source. See, “Input selection” section.

• You may also connect through the SCART 1 . Use a SCART cable as shown below.

REAR VIEW

Component

video
cable

HDMI
cable

Component

audio
cable

Note: These three methods of connection perform the same function but in different levels of

quality. It is not necessary to connect by all three methods.

English - 14 -

Using other connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are

shown below. Note that cables shown in the illustration are not supplied.

• To connect external speakers, use an audio cable. Do not reverse the AUDIO LEFT and

AUDIO RIGHT jacks. Turn on the LCD TV and external speaker set after all connections are

made. Refer to your speaker set’s manual for further queries.

• To listen to the sound from headphones, connect to the HEADPHONE jack of theTV.

Headphone

external speaker

English - 15 -

Connecting other equipment via scart

VCR

DVD Recorder

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a

decoder to your LCD TV by using the SCART sockets. Note that cables shown in the illustration

are not supplied.

• Power off both the TV and the devices before making any connections.

• For more information, refer to your device’s own instruction book.

REAR VIEW

scart

sockets

English - 16 -

Inserting batteries in the

30

30

/

/

GUIDE

P+

M

remote control handset

IMPORTANT : The TV set is designed to operate on

220-240V AC ,50Hz.

• Remove the battery cover located on the back

of the handset by gently pulling backwards

from the indicated part.

• Ins er t two AAA/R03 or equ ivalent type

batteries inside. Place the batteries in the

right directions and replace the battery cover.

Note: Remove the battery from remote control

handset when it is not to be used for a

lo n g peri od. Ot herw ise, it ca n be

dama g ed due to any leaka g e o f

batteries .

Operating range for the remote
control

• Point the top of the remote control toward

the LCD TV's remote sensor LED while

pressing a button.

OK

ABC DEF GHI

1 2 3

JKL MNO PQR

4 5 6

STU VWX YZ

7 8 9

0

PP

P -

P<P

Remote range is approximately 7m/23ft.

English - 17 -

Switching the TV on/off

Source

YPBPR

To switch the TV on

• Your TV will switch on in two steps.

• Connect the power cord to 220-240V AC 50

Hz. Press stand-by button. Then the TV

switches itself to stand-by mode (Optional).

• To switch on the TV from stand-by mode

either:

• Press a digit button on the remote control so

that a channel number is selected, or press

the -P/CH or P/CH+ button on the TV or press

the P/CH+ or P/CH- button on the remote

control, so that la st mode switched off is

selected. By either method the TV will switch

on.

To switch the TV off

• Press the “ (stand-by)” button on the

remote control or stand-by button on the TV,

so the TV will switch to stand-by mode.

• To power down the TV completely, unplug

the power cord from the mains socket.

Input selection

Once you have connected external systems

to your TV, you can switch to different input

sources.

• Press the

until the desired source is highlighted. The

TV will then switch to the selected source

after a short while.

AV

button on your remote control

TV

EXT1
PC

DTV

HDMI

English - 18 -

Basic operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons on the TV

Volume setting

• Press - button to decrease volume or

+ button to increase volume, so a volume

level scale (slider) will be displayed on the

screen.

Programme selection

• Press P/CH + button to select the next

programme or P/CH - button to select the

previous programme.

Entering main menu

• Press the MENU button to enter main menu.

In the Main menu select sub-menu using P/

CH - or P/CH + buttons and enter the sub-

menu using

the usage of the menus, refer to the menu

system sections.

AV mode

• Press the TV/AV button at the control panel

on the TV to switch your TV to AV modes.

Operation with the remote control

• The remote control of your TV is designed to

control all the functi ons of the model you

selected. The functions will be described in

accordance with the menu system of your

TV.

• Functions of the menu system are described

in the following sections.

- or + buttons. To learn

Volume setting

Press V + button to increase the volume.

Press V - button to decrease the volume. A

volume level scale (slider) will be displayed

on the screen.

Programme selection (Previous or
next programme)

• Press P - button to select the previous programme.

• Press P + button to select the next programme.

Programme selection (Direct access)

•Press numeric buttons on the remote control

to select programmes between 0 and 9. The

TV will switch to the selected programme.

To select programmes between 10 - 999 (for

IDTV) or 10-99 (for analogue), press the

numeric but tons co nsecutively (e.g. for

programme 27, first press 2 and then 7).

When the pressing time is due for the second

numeric button, only the first digit programme

will be displayed. The limit of the delay time

is 3 seconds.

• Press directly the programme number to

reselect single digit programmes.

English - 19 -

Initial settings

Auto. Programming System

West Europe









DTV

When the TV set is operated for the first time,

the IDTV turns on first.

Because this is the first time the TV is used, there

are no channels stored in the memory and the

following message appears on the screen:

Please ensure aerial is plugged in. Do you
want to start first time installation?

Yes

No

Language

Country
Txt. Region

Check the antenna cable

Start : Ok

English

U.K.

Exit : TV

• To start installation process, select “Yes”,

to cancel select “No”.

• To select the “Yes” or “No” option, highlight

the item by using

or buttons and press

the OK button.

The IDTV will automatically tune to the UHF

transmission channels 21 to 68, searching

fo r dig ital terrest ria l TV broa dcas ts an d

displaying the names of channels found. This

process will take about five minutes. To cancel

searching, you can press the M button at any

time during the process.

AUTOMATIC SEARCH

Channels:

BBC ONE
BBC TWO
BBC CHOICE

Searching UHF channels 30. Please wait. This will take a few minutes

12 %

MENU

Cancel search

After Automatic Search is completed, the

following message asking for analogue channel

search appears on the screen:

Do you want to search for
analogue channels?

Yes

No

To se arch fo r an alogu e chann els, select

“Yes”. TV switches to the analogue TV mode.

The menu below is displayed to search for

analogue channels:

Set Language item by pressing  or  button.

Press

and then use

button to highlight Txt. Region. Select a region

by using

OK button to continue. To cancel, press the

TV

For more information on this process, see

“Install Menu” section.

NOTE: For proper functioning of digital teletext

General operation

Pressing the

while watching television programmes will

switch the TV set between displaying the

digital terrestrial television broadcasting and

its normal analogue broadcasting.

Information Banner

• Whenever you change channel, using the P-

/ P+ button or the numeric buttons, the TV

displays the broadcast picture along with an

information banner at the bottom of the

screen. This will remain on the screen for

approximately three seconds.

• Th e i n f ormati o n b anner ca n a l s o b e

displayed at any time while watching TV by

pressin g the

control:

English - 20 -

or  button to highlight Country item

or  to set. Pres s  or

or  button. When finished, press

button.

in DTV mode, you should set country

as UK in analogue APS.

TV

button at any time

but ton on the remote

Now: 50/50

Chuckle Vision 13:00-14:00

I

More

Change

Next: Ace Lighting

1. BBC ONE

Signal Level:

09:25 - 11:00
11:00 - 11:25

13:15

• The informa tion banner gives information

on the ch a n nel se l e cted an d the

programmes on it. The name of the channel

is displayed, along with its chann el lis t

number and an indication of the strength of

the signal received.

Hin t : Not all c h a nnels b roadcast the

programme data. If the name and time

of the programme are not available,

then “No Information Available” will be

displayed in the information banner.

• Icons are also displayed in the information

banner and if this channel is a favourite

channel, favourite channel icon “

” will

also be displayed.

If the selected channel is locked, you must

enter the correct four numeric code to view

the chan n e l. “E nter Lock Key” will be

displayed on the screen in such a case:

Enter Lock Key

Electronic programme guide (EPG)

• Some, but not all, channels send information

about the current and next events.

• Please note that event information is updated

automatically. If there is no event information

data available in channels , only channel

names with “No Information Available”

banner is displayed.

• Press GUIDE button to view the EPG menu.

• In EPG menu, you can easily see the extended

help information by pressing

• Press this button again to close this window.

• In the EPG menu, all channels are displayed.

button.

Current channel is highlighted. Use

or

buttons to change channels. Also press

GREEN/RED buttons to scroll up/down the

pages for the channels.

• If you high l ight an even t ; short event

description, extended event description, start

and end times of the event will be displayed

on the screen.

• When the current programme is highlighted,

the box is switched to the highlighted channel

by pressing the OK button.

• If you press the OK button when a next event

is highlighted, a remi nder is set for the

highlighted programme and a clock appears

across the highlighted channel line.

Programme reminders can be se t to signal

that a programme is about to start when you

are watching anoth er channel. If you set

reminder for a programme, then you will be

asked for switching to that channel when the

reminder time is reached.

• Press the M button to view the 7 day EPG.

• Press

or button to navigate in Channels

or Programmes.

• Press or button to navigate through the

channel and programme list.

ELECTRONIC PROGRAMME GUIDE(7 Day) Saturday 21/8 13:49

Triple bill. In the Ring/Romany Days/On the Radio: Paul and Barry
grapple with the world of wrestling; hunt for a mysterious Emperor's
underpants; and record their first pop song.

Channels Programmes on Saturday 21/8, 13:00 - 15:00

30. CBBC Channel 13:00 Chuckle Vision (Now)

40. BBC NEWS 24 14:00 Tracy Beaker

41. ITV News 14:55 Newsround

50. Four Text

800. BLUE/LEFT 1k...

801. CCIR17/1kHz...

Navigate

Day

• With RED/GREEN buttons, you can change

the schedule time. By pressing YELLOW/

BLU E yo u ca n adv a n c e th e sc h edule

backward/forward of a day.

English - 21 -

• If you press button you can se e the

I

More

Interactive services cannot be used
while subtitles are on. Would you like

detailed help information easily. Press

button again to exit help menu.

• The starting time for EPG is the current time.

You can see the event information for the

next two hours. By pressing

or button,

you can go to the next/previous hours while

Programmes list is highlighted.

• lf you press the OK button when a next event

is highlighted, a remi nder is set for the

highlighted programme and a clock appears

on the screen.

• Programme reminders can be set to signal

that a programme is about to start when you

are watching another channel. If you set

reminder to a programme, then you will be

asked for switching to that channel when the

reminder time is due.

ELECTRONIC PROGRAMME GUIDE(7 Day) Saturday 21/8 13:51

Newsround 16:55-17:00

CBBC joins the Newsround team, keeping you up to date on the latest
stories and events happening at home and abroad.

Channels Programmes on Saturday 21/8, 15:00 - 17:00

30. CBBC Channel 15:00 Even Stevens

40. BBC NEWS 24 15:50 Newsround Showbiz

41. ITV News 16:00 Basil Brush

50. Four Text 16:55 Newsround

51. BBCI

800. BLUE/LEFT 1k...

801. CCIR17/1kHz...

DayNavigate

Displaying the subtitles

With digital terrestrial broadcasting (DVB-T),

some p rogra m m e s are b r o adcas t with

subtitles. Subtitles can be displayed while

watching these programmes.

Press the M button to display the main menu,

highlight the Configuration line using

button and press the OK button to display the

configuration menu.

Highlight the “Subtitle” item in configuration

or

menu and use

or button to set Subtitle to

Off or a language.

If “Subtitle” is on and a language option is

se t, pres sing the

bu tto n c aus es t he

following warning message display on the

screen:

to turn subtitles off now?

Yes

No

Digital teletext

With digital terrestrial broadcasting (DVB-T),

in addition to pictures and sound, you can also

view digital teletext.

Digital teletext is sometimes broadcast at the

same time with the normal broadcasting.

• Press the

• The digital teletext information appears.

• Operate it with the coloured buttons, / / /

buttons and OK button.

The operation method may differ depending

on the contents of the digital teletext.

Follow the instructions displayed on digital

teletext screen.

• When “Press SELECT” button or similar

message appears on the screen, press the

OK button.

• When the

TV returns to television broadcasting.

• With digital terrestrial broadcasting (DVB-

T), in addition to digital teletext broadcasting

at th e sa m e t i m e with the n ormal

broadcasting, there are also channels with

just digital teletext broadcasting.

• The aspect ratio when watching a channel

button.

(Text) button is pressed, the

English - 22 -

with just digital teletext broadcasting is the

DTV

Configuration

i

same as the as pect ratio of the picture

watched previously.

• When you press the

(Text) button again,

the digital teletext screen will be displayed.

Over air download

To ensure that your IDTV always has the most

up-to-date information, please ensure that,

after use, it is set to standby mode. At 3 A.M.

each day, the IDTV automatically searches for

any new information which may be broadcast

and wi l l d ownl o a d this to you r I D TV

automatically. This operation will normally

take approximately 30 seconds.

If you want to perform this, you need to set

Automatic Download to “Enabled” in Receiver

Upgrade setting.

Widescreen

Depending on the type of the broadcast being

transmitted, programmes can be viewed in a

number of formats. Press the WIDE button

repeatedly to select between Auto, 4:3, 16:9,

Cinema or Subtitle.

When Auto is selected, the format being

displayed is determined by the picture being

broadcast.

PLE A S E N OTE: Menu s ize cha n g e s

depe n d ing on the

chosen image size.

IDTV menu system

The IDTV menu can only be viewed when

watc hing dig ital te rre str ial broadcasting.

Press the

while the TV is in analogue mode.

Press the M button. The menu below appears

on the screen:

Channel list

Using the or button on the remote control,

make sure that the first item, Channel List, is

highlighted and press the OK button to display

the Channel List.

The following op erations can be performed

in this menu:

• Navigating the entire list of channels

• Deleting channels

• Renaming channels

• Adding locks to channels

• Setting favourites

Channel List is the place where the channels

are managed.

TV

button to turn IDTV on

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

English - 23 -

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Function

Delete Edit Name Lock Favourites

Select Channel Watch More

Navigating the entire channel list

SELECT

i

SELECT

SELECT

i

SELECT

Press or button for selecting the previous

or next channel. You can press RED or GREEN

button to move page up or page down.

To watch a specific channel, highlight it using

or button and then press OK button, while

the “Select” item on Channel List menu is

highlighted by using or button.

Then the name and number of the selected

channel will be displayed in the top-left and

top-right of the channel display at the top-right

of the screen, respectively.

Deleting the channels in the channel
list

Press or button to select the channel

that will be deleted.

Press or button to select the “Delete’’

item on Ch annel List menu. As see n on

Channel List menu, SELECT is displayed next

to Delete item at the bottom of the screen to

indicate that you must press the OK button to

delete the highlighted channel in the channel

list.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Press the OK button to delete the highlighted

channel in the channel list. Then the message

below appears on the screen:

Delete Edit Name Lock Favourites

Function

The selected service will be permanently
deleted. Are you sure?

Select Channel Delete More

Yes No

Press or button to highlight the desired

option. If OK button is pressed while “Yes” is

high l i ghted, the hi ghlighte d chan n e l is

deleted. Selecting “No” cancels the deletion.

Renaming channels

To renam e a specific channel, the channel

must be highl ig hted by pre ssing

button. Then highlight the Edit Name item by

pressing

or button as illustrated below..

Press the OK button to activate the rename

feature.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Edit Name More

Now pressing or button moves to the

previous/next character. Pressing

button toggles the current character, i.e., ‘b’

character becomes ‘a’ by

and ‘c’ by .

Pressing the numeric buttons ‘0...9’ replaces

the highlighted character with the characters

printed above the button one by one as the

button is pressed.

Press the M button to cancel the editing or OK

button to save the new name.

Adding locks to channels

Cha n n el lock i n g pro v i d es a pa s s word -

protected access to channels selected by

parents. In order to lock a channel you should

know the parental lock password (default

value is set to 0000 in the factory and can only

be changed from the Configuration menu).

Select the channel to be locked by highlighting

it and select the Lock option by pressing

or

or

or

English - 24 -

button. When the OK button is pressed, a

SELECT

i

SELECT

SELECT

i

SELECT

CHANNEL LIST 1 BBC ONE

Press the SELECT button on your remote control to tune to the

Configuration

dialogue OSD asking for the password will

be displayed.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Lock/Unlock More

Enter Lock Key

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Add/Remove... More

On Screen Help

For all menus, press the button to display

the help information about the menu functions.

For C h annel L i st menu t h e f o llowi n g

message is displayed on the screen:

Enter the password by using the numeri c

buttons on the remote control. The lock icon

“ ” will now be displayed next to the selected

channel. Repeat the same operation to cancel

the lock.

Setting Favourites

You can set various channels as favourites

so th at only the favourit e chann els are

naviga ted. To set a favo urite yo u sh ould

highlight the Favourites item at the bottom of

the Channel List menu.

Us e the

“Favourites” item at the base of the screen

and then, in turn, highlight each channel you

want to add to the favourites list, using the

and buttons (or red/green buttons), and

press the OK button.

A channel selected as a favourite appears in

the main channel list with a favourites icon

(

) against the channel name as illustrated

below:

or but ton to high l igh t the

highlighted channel.
Press MENU to exit this screen.

Installation

The Installation menu is mainly intended to

help you to create a Channel Table in the most

efficient way.

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

This menu includes the following items:

• Add New Channels.

• First Time Installation.

English - 25 -

Add new channels

First Time Installation

Auto. Programming System

West Europe









This tuning menu consists of two parts:

• Automatic Search

• Manual Search

Installation

Add New Channels

First Time Installation

Automatic Search

Automatic search is started by pressing the

OK button in the auto-search pop up menu.

All the services will be searched and a channel

table will be created automatically.

All channels found are stored in a sorted form

with respect to their channel numbers. Some

services may not appear with the correc t

channel number. If the broadcaster has no

channel information, this may happen due to

missing info.

Manual Search

In manual search, the number of the multiplex

is entered manually and only that multiplex is

searched for the channels. For every valid

channel number, signal level, signal quality

and network name are shown at the bottom

of the screen.

In both manual and auto search, any existing

channel in the database is not re-stored to

avoid redundant duplicates of that channel.

First Time Installation

The user can use this item to load default

settings, which were loaded to the receiver at

the factory.

To install factory settings, highlight “First Time

Installation” menu and press the OK button.

Installation

Add New Channels

Then you will be asked to confirm for deleting

all channels and settings:

Automatic Search

Manual Search

By selecting Yes and pressing the OK button,

the existing channel table will be deleted.

After factory settings are loaded, “First Time

Installation” menu will be displayed:

Press the OK button to start installation. After

search is completed fo r digital channels, a

mess a g e as k i ng whether to sear c h fo r

analogue channels appears on the screen:

Press the OK button to search for analogue

channels.The following menu appears on the

screen for analogue channel search:

Set Language item by pressing  or  button.

Press

and then use

button to highlight Txt. Region. Select a region

by using

OK button to continue. To cancel, press the

English - 26 -

Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?

Yes

Please ensure aerial is plugged in. Do you
want to start first time installation?

Yes

Do you want to search for
analogue channels?

Yes

Language

Country
Txt. Region

Check the antenna cable

Start : Ok

or  button to highlight Country item

No

No

No

English

U.K.

Exit : TV

or  to set. Pres s  or

or  button. When finished, press

TV

DTV

Auto. Programming System

i

CONFIGURATION

Parental Settings

Change Default Audio Language

button. The following menu will be

displayed during the APS process:

can select a fu nctio n by highl ighting the

corresponding menu line using the

or

button. Configuration menu will look like this:

State: Fine scanning ...

Exit : TV

After APS is finalized, the programme table

will appear on the screen. In the programme

table you will see the programm e numbers

and names assigned to the programmes.

If you do not accept the locations and/or the

programme names, you can change them in

the programme table.

Configuration

Press the M button to display the main menu

and press the

Configuration. Then press the OK button to

display the configuration menu. Press the M

button to leave the menu screen.

Th e var ious co n figu rati on fun c tion s are

displayed in a list, along with a quarter-screen

image of the currently selected channel. You

button twice to highlight

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade

English
Off
Off
Now&Next
V.1.5

More

Audio language

Digital terrestrial television cha nnels can

broadcast simultaneous soundtracks in more

than one language. This function selects

which language sou ndtrac k you will hear

when switching to a channel broadcasting with

the multiple soundtracks.

Highlight the Audio Language line in the

Configuration menu and use the

or

button to cycle through the language options.

Subtitles

Digital terrestrial television cha nnels can

broadcast subtitles displayed on the screen

for pe ople with hea rin g difficulties . Thi s

function selects the desired subtitle language

and enables the automatic display of subtitles

whenever subtitle information is broadcast.

Highlight the Subtitle line in the Configuration

menu and use the

or button to cycl e

through “Off” and language options.

Favourite mode

This function enables or disables the favourite

channel list mode.

Use

or button to turn on/o ff favourite

mode. If the “Favourite Mode” is on; while in

normal operating mode, pressing P+ and P-

but t ons wil l on l y navi g a te t h roug h th e

English - 27 -

channels that were previously defined as

i

CONFIGURATION

favourites in the channel list.

EPG preference

Digital terre strial television cha nnels can

broadcast simultaneous Next&Now and 7-

Day electronic programme.

Highlight the EPG Pref er ence line in the

Configuration menu and use the

button to select Next&Now or 7-Day.

Receiver upgrade

Th e I D TV can be u p g raded v i a t h e

configuration menu, entered from the main

menu.

In the confi gur ation menu, hig hli ght the

“Receiver Upgrade” item by pressing or

button and press the OK button to start

upgrade process.

Th ere are two po ssib i l ities fo r receiv er

software to be upgrad ed: automatic and

manual.

Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade

Automatic Download
Search for New Version

MENU

Exit

Automatic download (Automatic upgrade)

Au tomatic Down loa d can be enabled or

disabled by pressing

enab l e d, t h e n t h e re a r e two ways f or

automatic upgrade:

• The first one is checking the existence of a

new software every time the IDTV goes to

standby.

• The second one is being activated at 03:00

A.M. every night, provided that the IDTV is left

in standby mode.

English
Off
Off
Now&Next
V.1.5

Enabled

or button. If it is

• Both automatic upgrade methods result in

standby mode either the upgraded or not.

If the automatic upgrade is set to “Disabled”

then this function will not work.

Search for new version (Manual Upgrade)

Manual upgrade starts if the “Search for New

Version” item is highlighted by using

or

button and activated via pressing the OK

button.

After “Search for New Version” is activated,

the IDTV tunes to each frequency that have

been stored in its database and looks for the

new so f twa r e. Durin g th is proce s s, the

following OSD is displayed:

Parental settings

Some channels broadcast material which you

do not want younger members of the family to

watch. Any channel can be ‘locked’ so that it

cannot be selected for viewing unless a four-

digit PIN code is entered . In this way, any

channel not suitable for younger viewers can

be prohibited.

More

English - 28 -

This function enables or disables the menu

protection system and allows the PIN code to

be changed.

Use or button to highlight Parental

Settings option. Press the OK button to enter

Parental Settings menu. A dialog box asking

for the lock key is displayed:

Software Upgrade

Searching for upgrade. Please wait, or
press MENU to cancel.

Search Progress:

Enter Lock Key

or

There is only one key which is set to “0000”

Wrong Lock Key

Installation

Configuration

i

No Channel Name Start End Date Mode

1. ITV 1 20:00 21:00 12/05/2005 Active

Name:

initially. Enter lock key. If wrong lock key is

entered, the following message is displayed

and the TV then returns to the previous menu:

Main Menu

Channel List

Installation

If it is correct, the Parental Settings menu will

be displayed including the following items:

Menu Lock

Set Lock Key

There you can set/reset locking for the main

menu or the installation menu to restrict

access. If the menu lock is disabled, there

will be free access to the menu system. Also

in this menu you can change the lock key and

set/change parental lock mode.

Disabled: All menus are unlocked.

Main Menu: Main menu is accessible only with

the correct lock key. So the user

ca n not add , delet e , renam e ,

move chann e l s , c a n not s e t

timers.

Installation: Installation menu is locked, so

the user cannot add channels.

Note: Changes will be updated after exiting

configuration menu.

Timers

You can set a timer to switch the TV to any

channel without your intervention. This is also

for making video recordings of programmes

when you are out.

Display the main menu by pressing the M

button. Highlight the Timers line by pressing

or button and press the OK button to

display the Timer menu:

Up to five separate timer events can be set

and each is displayed in the Timer sc reen,

showing the event number, the channel to be

selected, the start time, end time, date and

the mode - whether that event is active (and

will be acted on) or not.

• To set an event, highlight its mode button

using the

button to display the timer entry window.

• Here the five sett in gs consistin g o f the

channel name, start time, end time, date and

frequency mode can be set. You can move

freely between each setting using the

• The channel name is set using the

butt o n t o disp l a y t h e c h a nnel which

broadcasts the programme.

English - 29 -

Timers

Language

TV Setup

Common Interface

TIMER MENU

2. BBC ONE 00:00 00:00 01/01/2005 Inactive

3. BBC ONE 00:00 00:00 01/01/2005 Inactive

4. BBC ONE 00:00 00:00 01/01/2005 Inactive

5. BBC ONE 00:00 00:00 01/01/2005 Inactive

6. BBC ONE 00:00 00:00 01/01/2005 Inactive

Toggle Mode

MENU

Edit Timer More

Exit

or button and press the OK

3. ITV 1
Start:
End:
Date:
Mode:

00:00
00:00
03/06/2005
Once

buttons.

or

or

• The start time, end time and date are each

Configuration

Configuration

set with the numeric buttons on the remote

control in 24-hour format.

• The frequency mode determines how often

the receiver operates this event and is set

with the

or button to be either Once,

Daily, or Weekly.

If an invalid number for the start or end times

or the date is entered, “Entered time is not

va l i d” messa g e appear s on the m enu

screen.

If timer action occurs while the TV is being

watched, the TV switches to the selected

channel. When timer expires, the TV switches

back to the channel which it is switched from.

Language

Some programmes are broadcast in two or

more langu a g es si m ultane o u s ly. T h e

languag e th us can be selec ted from the

Language menu.

• Press the M button to display the main menu

and use

Language line and press the OK button:

or button to highlight the

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

Languages

English

TV setup

You can use this ite m to displa y the TV

functions.

Th e d i gital T V Setup m e n u screen i s

accessed from the main menu. Press the M

button to display the main menu and use

or button to highlight “TV Setup”, press the

OK button to display TV Setup menu screen.

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

You can find detailed information for all menu

items in “Analogue TV Menu System” section.

Common Interface

• Press the M button to display the main menu

and use the

“Common Interface” line and press the OK

button:

or button to highlight the

• Use the or button to highlight the

soundtrack language required and press the

OK button. Normal viewing, with the required

language soundtrack, can be resumed by

pressing the M button.

English - 30 -

Main Menu

Configuration

Channel List

Installation

Timers

Language

TV Setup

Common Interface

You are required to subscribe to a pay channel

company to view the pay channels of the digital

terrestrial broadcasting.

Obtain the Conditional Access Module (CAM)

and the viewing card by subscribing to a pay

channel company, then insert them in the TV

using the following procedure.

Please note that you must be able to receive

Channel 5 in order to use the CI Slot with a

CAM.

• Switch off the TV and unplug from the mains.

• Insert the CAM, then viewing card to the slot

that is located in the terminal cover at the

left-hand side of the TV (from front view).

• The CAM should be correctly inserted, it is

impossible to insert fully if reversed. The

CAM or the TV terminal may be damaged if

the CAM is forcefully inserted.

• Connect the TV to the mains supply, switch

on and then wait for few moments until the

card is activated.

• Some CAMs may require the following set

up. Please set the CAM by entering the IDTV

menu, Common Interface then pressing the

OK butt o n. (C A M set up men u is not

displayed when it is not required.)

• To see the viewing contract information: enter

IDTV; press the M button, then highlight

Common Interface and press the OK button.

• When no module is inserted, “No Common

Inte rface module detected ” mes sage

appears on the screen.

• Refer to the module instruction manual for

details of the settings.

NOTE: Insert or remove the CI module only

when the TV is in STAND-BY mode or

SWITCHED OFF.

English - 31 -

Analogue TV menu map

INSTALL

PICTURE MENU

SOUND

Volume

Balance 0

Sound Mode Stereo

AVL On
Effect Off

Back : Menu Exit : TV

PICTURE

Picture Mode Bright

Brightness

Contrast

Colour

Sharpness

Back : Menu Exit : TV

FEATURES

Sleep Timer Off

Language English

Child Lock Off

Menu Colour Gray

Favourite mode

Back : Menu Exit : TV

Programming

A.P.S.

Txt. region West Europe

Program Table

Back : Menu Exit : TV

SOUND MENU

-Volume

-Balance

-Sound Mode

-AVL

-Effect

-Equalizer

-Brightness

-Contrast

-Colour

-Sharpness

-Colour Temp

-Mode

-HP Volume

-Store

-Picture zoom

-Store

FEATURES MENU INSTALL MENU

-Sleep Timer

-Language

-Child lock

-Menu Colour

-Favourite Mode

-Programming

-Band

-Channel

-Standard

-Search

-VCR Mode

-Decoder

-Store

-APS

On

-Txt. Region

-Program Table

A menu map is provided above. For details of the items,

refer to relevant explanations in the “MENU SYSTEM”.

English - 32 -

Navigating the analogue TV

INFO

For displaying

SOUND

Back : Menu









menu system

For navigation

To confirm
choices

SELECT

OK

M

• Press M to display the main menu.

• Press

or button to select an icon. Press

or OK button for more options.

• Use

• Press

or button to highlight.

or buttons to change the settings.

Press OK to set as default.

• To exit the menu or return from sub-menu

screen, press M.

Note: These explanations are valid for the

navigation of the whole menu system.

To select options that are explained in

the following parts, refer to “Navigating

the Analogue TV Menu System”.

menu options

Analogue TV menu system

Sound Menu

Volume

Balance 0
Sound Mode Stereo
AVL On
Effect Off

Exit : TV

Volume

When you enter the sound menu, Volume will

be the first selected option. Press

to change the level of the Volume.

Balance

This setting is used for emphasizing the left

or right speaker balance.

Press or button to select Balance. Press

/  button to change the level of the balance.

Balance level can be adjusted between -32

and + 32.

Sound mode

Press or button to select Sound Mode.

Using

/  button, you can select Mono,

Stereo, Dual I or Dual II mode, only if the

selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function adjusts

the sound to obtain fixed output level between

programmes (For instance, volume level of

advertisement s tends to be louder than

programmes).

Press

or button to select AVLVL. Press  /

button to set the AVL as On or Off.

Effect

If you are watching a mono broadcast, set

Effect on to obtain a better sound effect which

/  button

English - 33 -

will be more stereo-like. If the current sound

/ 

















system is stereo, switching this effect on will

give a more spatial effect.

Press

or button to select Effect. Press

button to set Effect as On or Off.

Equalizer

Press or button to select Equalizer. Press

/  button to change the Equalizer setting. In

equalizer menu, the mode can be changed to

Flat, Speech, Music, Personal and Jazz.

Select the desired frequency by pressing

/

button and increase or decrease the frequency

gain by pressing

Note: Equalizer menu settings can be changed only

when the mode is in Personal.

/  button.

HP volume

To adjust headphone volume level, press

or button to select HP Volume. Press  /

button to change the level of the HP Volume.

Store

Select Store by pressing  /  button. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

Picture menu

Picture Mode Bright

Brightness
Contrast
Colour
Sharpness

Back : Menu Exit : TV

Brightness/contrast/colour/

sharpness/tint

Press or button to select the desired

option. Press

Hint: Tint (Hue) is displayed in picture menu when

the TV receives an NTSC signal.

/  button to set the level.

Colour temp

Press or button to select Colour Temp.

Press

/  to choose from one of these

options: Cool, Normal and Warm.

Note:

• Setting Cool option gives white colours a

slight blue stress.

• Setting Warm option gives white colours a

slight red stress.

• For normal colours, select Normal option.

Room lighting

Select Room Lighting by pressing the /

button. Pres s / button to set Room

Lighting as Normal, Bright or Movie.

Picture zoom

Picture Zoom setting enable s you to select

the aspect ratio of the broadcast.

Select Picture Zoom by pressing / button.

Use

/  buttons to change Picture Zoom to

Auto, 4:3, 16:9, Cinema or Subtitle.

Store

Select Store by pressing  /  button. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

Picture mode

For your viewing requirements, you can set

the related mode option.

Press

Press

options: Bright, Standard, Soft and Manual.

or button to select Picture Mode.

or button to choose from one of these

English - 34 -

Features menu

Sleep Timer

Back : Menu











Programming

Txt. region

West Europe

Program Table

PROGRAMMING

Colour System

Install menu

FEATURES

Language Engli sh
Child Lock Off

Menu Colo ur
Favourite Mode

Sleep timer

Press or button to select Sleep Timer.

Use

/  button to set the Sleep Timer.

The timer can be programmed between Off

and 120 minutes in steps of 10 minutes.

If Sleep Timer is activated, at the end of the

selected time, the TV goes automatically to

standby mode.

Language

Press or button to select Language. Use

/  button to select the Language.

Child lock

Press or button to select Child Lock.

Use

/  button to set the Child Lock On or

Off. When On is selected, the TV can only be

controlled by the remote control handset. In

this case the control panel buttons (except for

the STANDBY button) will not work.

Hence, if one of those buttons is pressed,

“Child Lock On” will be displaye d on the

screen when the menu screen is not visible.

Menu colour

Press or button to select Menu Colour.

/  button to change menu background

Use

to Transparent or Gray.

Favourite mode

Press or button to select Favourite Mode.

/  button to set Favourite mode On or Off

Use

(See the “Program Table” section for details).

Off

Gray

On

Exit : TV

English - 35 -

INSTALL

A.P.S.

Back : Menu Exit : TV

Programming

Select Programming by pressing / button.

Then press

button to display Programming

menu:

Programme 4

Band S

Channel 30
Standard BG

Back : Menu Exit : TV

PAL

Programme

Select Programme by pressing

Press

/ button to select the programme

/ button.

number. You can also enter a number via the

numeric buttons on the remote control. There

are 100 programme storage spaces between

0 and 99.

Band

Band can be selected either C or S. Press

/ button to select Band.

Channel

Select Channel by pressing

Channel can be changed by pressing

/ button.

/

button or the numeric buttons.

Standard











DTV

Auto. Programming System

Automatic tuning runs at: 78 %

DTV

Select Standard by pressing

/ button. Use

/ button to change the standard to B/G,

D/K, I or L/L'.

Colour system

Select Colour System by pressing / button.

Use

/  button to change the colour system

to PAL, SECAM or AUTO.

Search

Select Search by pressing / button. Press

/  button to start search. The search will

stop when a signal is found.

Note: If you press the buttons with one-step moves,

a frequency of 0.25 Mhz will be advanced.
However if you press the buttons all at once, it
will advance automatically. To stop searching
at a certain time, you may press

/ buttons.

VCR Mode

Select VCR Mode by pressing

/  buttons to set VCR Mode as On or Off.

Use

/ button.

Hint: If you want to watch a DVD , then you

have to set this item as Off.

Decoder

You can use this mode to connect any decoder to
your TV.

Select Decoder by pressing / button. Press

the

/  buttons to turn it On or Off.

When you switch the Decoder setting to Off,

EXT-1 output will be muted. In this case, EXT-

1 output will not be available to display video.

If it is switched on, the EXT-1 output will be the

selected video source. Any decoder can be

connected to EXT-1 to unscramble required

video signals.

Hint: Decoder setting should be stored separately

for each programme.

Store

Select Store by pressing  /  button. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

A.P.S.

Select A.P.S. by pressing  /  button. Press

button to enter the A.P.S. submenu:

Auto. Programming System

Country

Warning! All prestored programs
will be deleted

Start : Ok
Back : Menu

U.K.

Exit : TV

A.P.S. country

Press / button to set your country..

If you want to exit from A.P.S. function, press

TV

the

When you press OK button for starting APS,

all stored programs will be erased and the

following screen will be displayed:

Whenever you press the

function stops and program table appears on

the screen.

If you wait until the end of A.P.S., Program Table

is displayed with the programmes found and

located.

button. For going back, press M.

State: Fine scanning ...

Exit : TV

TV

button, A.P.S.

English - 36 -

Teletext region





PROGRAMMING

Colour System



Program Table





Select Txt. region by pressing  /  button.

Using

/  buttons, select your teletext region.

There are five options to select: West Europe,

East Europe, Turk/Gre, Cyrillic and Arabic/

Hebrew.

Install menu in AV modes

The following screen appears in the install

menu:

INSTALL

Programming

Txt. Region

Back : Menu Exit : TV

Programming

Select Program ming by pres sing  /

button. After pressing button, programming

menu appears on the screen:

VCR Mode
Store

Back : Menu Exit : TV

Colour system

Select Colour System by pressing  /

button. Press / button to change the colour

system to PAL, SECAM or AUTO.

West Europe

PAL

Off

Program table

P01

P01 BBC 1

P02 C 04
P03 P13
P04 P14
P05 P15
P06 P16
P07 P17
P08 P18
P09 P19
P10 P20

Delete
Name

Program Table lists the channels that are

stored in the memory. By moving the cursor in

four directions, you can reach 20 programmes

in the same page. You can scroll up or scroll

down to see all the programmes while in TV

mode by pressing the navigation buttons. By

cursor action, programme selection is done

automatically.

Name

To change the name of a programme, select

the d e s i red pr o g ramme and p r e s s the

YELLOW button.

The first letter of the selected name starts to

blink. Press

and

/  button to select the other letters. By

/  button to change that letter

pressing the YELLOW button, you can store

the name.

Move

Select the programme that you want to insert

by using the navigation buttons. Press the

GREEN button. Using navigation buttons, move

th e sele cte d prog ram m e to the dec ided

programme space and press the GREEN

button again.

P11
P12

Move
A.P.S

Exit: TV

English - 37 -

Delete

You May Unlock this Program

Enter old PIN

To delete a programme, press the RED button.

Pressing the RED button again erases the

selected programme from the programme list

and the programmes below shift one line up.

APS (Auto Programming System)

When you press the BLUE button for APS, Auto

Programming System menu will appear on

the screen.

Favourite mode

You can set various channels as favourites

so th at only the favourit e chan n els are

navigated. To set a favourite, use the navigation

buttons to select a channel and then press

the

item. The channel selected as a

favourite appears in the Program Table with a

favo urites icon ( ) against the channel

name. For removing a favourite, carry out the

same operation. To exit, press M.

Program lock

Program Lock

Enter PIN

Change PIN

Back : Menu Exit : TV

Pr o gram Lo cking pr ovid e s a password-

protected access to channels selected by

parents. In order to lock a channel you should

know the Program Lock password (default

value is set to 0000 in the factory and can only

be changed from the Program Lock menu).

Enter PIN

Select the channel that you desire to lock by

highlighting it and then press the

When the

button is pressed, Program Lock

button.

menu will be displayed on the screen. After

entering the pin code, desired channel will be

locked. The program lock icon will appear next

to the chan nel na m e. Wh en the lo cked

channel is selected through P+ or P- buttons,

the follow ing w a rning scre e n wil l be

displayed:

Program Is Locked!

from Program Table.

Change PIN

Select Change PIN by pressing / button.

Use

button to change the PIN code. After

pressing

button, the following message

appears on the screen:

Program Lock

Back : Menu Exit : TV

Ente r ol d PI N co de through th e numer ic

buttons and then enter your new PIN code.

Program Lock menu will be displayed on the

screen when you enter the new PIN code:

Program Lock

Back : Menu Exit : TV

Program Lock Menu will again be displayed

after a short while of the identification of new

PIN.

Hint: If you forget your Program Lock password, you

can deactivate the Program Lock by using the
code 7910 and be able to set new password for
future use. Thus, do keep this code in a safe
place for future reference.

English - 38 -

PC Mode Menu System









See the “Connecting the LCD TV to a PC”

section for connecting a PC to the TV set.

For switching to PC source, press the

button on your remote control and select PC

input.

Not e that PC mode me nu se t tings ar e

available only while the TV is in PC source.

Sound menu

The items in this me nu are described at

“Sound Menu” section explained in the “Menu

System” section.

Feature menu

Feature menu settings are identical to the

settings explained in “Feature Menu” section

in the “Menu System” section.

PC picture menu

Select PC Picture menu by pressing  / button

and then press

button. PC Picture menu

appears on the screen. Brightness, Contrast and

Colour Temperature adjustments in this menu

are identical to adjustments defined in TV picture

menu in “Menu System” part.

Geometry menu

Select the fourth icon by pressing  / button

and then press

appears on the screen:

button. Geometry menu

AV

H. (Horizontal) position

This item shifts the image horizontally to right

hand side or left hand side of the screen.

Select H. position by pressing

Use

/  button to adjust the value.

/ button.

V. (Vertical) position

This item shifts the image vertically towards

the top or bottom of the screen.

Select V. position by pressing

Use

/  button to adjust the value.

/ button.

Clock

Clock adjustments correct interference that

appear as vertical banding in dot intensive

pre s e n tatio n s like sp r e adsheets or

paragraphs or text in smaller fonts.

Select Clock by pressing

/ button. Use

/  button to adjust the value.

Phase

Dep e n ding on th e re s o l ution and scan

frequen

cy that you input to the TV set, you may

see a hazy or noisy picture on the screen. In

such a case, you can use this item to get a

clear picture by trial and error method.

Select Phase by pressing / button. Use

/  button to adjust the value.

Auto adjustment

If you shift the picture horizontally or vertically

to an unwanted position, use this item to put

the picture into correct place automatically.

Select Auto Adjustment item by using

/

buttons. Press  or OK button.

Warning: Auto position adjustment recommended

to be done with the full screen image for
the proper adjustment.

Clock

Phase
Auto Adjustment

Back : Menu Exit : TV

English - 39 -

Displaying TV Information

Programme Number, Programme Name,

Sound Indicator and Zoom Mode information

are displayed on the screen when a new

programme is entered or

button is pressed.

4:3

Use to view a normal picture (4:3 aspect ratio)

as this is its original size.

Mute function

Pr ess but ton to disable sou nd. Mut e

indicator will be displayed in the upper side

of the screen.

To cancel mute, there are two alternatives; the

first one is press ing the

second one is increasing the volume level.

button and the

Personal preference

Press PP button to adopt the previous settings

that you had stored before.

Zoom modes

You can change the aspect ratio of the TV for

viewing the picture in different zoom modes.

Press /WIDE button to directly change the

zoom mode. Available zoom modes are listed

below:

Auto

When a WSS (W ide Screen Signalling)

signal, which shows the aspect ratio of the

picture, is included in the broadcast signal or

the signal from an external device, the TV

au toma tica lly chang es the ZOOM mode

according to the WSS signal.

• When the AUTO mode does not function

correctly due to poor WSS signal quality or

when you want to change the ZOOM mode,

change to another ZOOM mode manually.

16:9

This uniformly stretches the left and right sides

of a normal picture (4:3 aspect ratio) to fill the

wide TV screen.

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect

ratio), use the 16:9 mode to restore the

picture to its original shape.

Cinema

This zooms up the wide picture (16:9 aspect

ratio) to the full screen.

Subtitle

This zooms up the wide picture (16:9 aspect

ratio) with subtitles to the full screen.

English - 40 -

Teletext

Teletext system tran smits informatio n such

as news, sports and weather on your TV. Note

that if the signal becomes insufficient, some

text errors may occur or the teletext mode may

be quitted.

Teletext function buttons are listed below:

Teletext On-Off / PAT mode

Activates teletext mode when pressed once.

Pressing this button again will split the screen

into two windows, one displaying the teletext

and the other displaying the current channel.

Pressing again will quit the teletext mode.

Index

Selects the teletext index page.

Mix

Places the teletext screen over the programme.

Expand

Press once to enlarge top half of the page,

press again to enlarge the bottom half of the

page. Press again to revert back to normal

size.

Reveal

Shows hidden information (e.g. solutions of

games).

Hold

Holds a text page when convenient. Press again to

resume.

Subcode pages / time

Selects subcode pages if available when the

teletext is activated. When the teletext is not

activated, displays time info if the programme

has teletext transmission.

P+ / P- and numbers (0-9)

Press to select a page.

Note: Most TV stations use code 100 for their

index pages.

Coloured Buttons

(RED/GREEN/YELLOW/BLUE)

Your TV supports both FASTEXT and TOP text

systems. When these systems are available,

the pages are divided into groups or topics.

When FASTEXT system is available, sections

in a teletext page will become colour-coded

and can be selected by pressing the coloured

butt o n s. Press a coloured button that

corresponds to with your needs.

The coloured writings will appear, showing

you, which coloured buttons to use when TOP

text transmission is present. Pressing P - or

P + co m mand s wil l reque s t the ne xt or

previous page respectively.

English - 41 -

Tips

Screen care

Clean the screen with a slightly damp, soft

cloth. Do not use abrasive solvents as they

may damage the coating layer of the TV

screen.

For your safety, unplug the mains plug when

cleaning the set. When moving the TV, hold it

properly from the bottom part.

Image persistence

Please note that ghosting may occur while

disp laying a persistent image. LCD TVs’

image persistence may disappear after a short

time. Try turning off the TV for a while.

To avoid this, do not leave the screen in still

picture for extended periods.

No power

If your TV system has no power, please check

the main power cable and connection to the

mains socket outlet.

Poor picture

Have you selected the correct TV system? Is

your TV set or house aerial located too close

to a non-earthed audio equipment or neon

lights, etc.?

Mountains or high buildings can cause double

pictures or ghost images. Sometimes you can

improve the picture quality by changing the

direction of the aerial.

Is the picture or teletext unrecogni sable?

Che c k if you have entere d the corre c t

frequency.

The picture quality may degrade when two

peripherals are connected to the TV at the

same time. In such a case, disconnect one of

the peripherals.

No picture

Is the aerial connected properly? Are the plugs

connected tightly to the aerial socket? Is the

aerial cable damaged? Are suitable plugs

used to connect the aerial? If you are in doubt,

consult your dealer.

No Picture means that your TV is not receiving

a transmission. Have you selected the correct

button on the remote control? Try once more.

Sound

You cannot hear any sound. Did you perhaps

interrupt the sound, pressing the

Sou n d is coming from only one of the

speakers. Is the balance set to one extreme?

See Sound menu.

button?

Remote control

Your TV no longer responds to the remote

control. Perhaps the batteries are exhausted.

If so you can still use the local buttons at the

top of the TV.

Input sources

If you cannot select an input source, it is

possible that no device is connected.

Check the AV cables and connections if you

have tried to connect a device.

CI module

If you are experiencing a problem with the CI

module, it is possible that CI module is not

properly inserted. Remove the CI ca rd and

then reinsert.

If the problem persists, it is possible that your

CI module is not recognized. Try inserting a

different CI module.

English - 42 -

Appendix A: PC Input typical display modes

The display has a maximum resolution of 1360 x 768 (optional), frequency range of 56-75 Hz.

The following table is an illustration of some of the typical video display modes.

Your TV may not support different resolutions. Supported resolution modes are listed below.

If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

Mode

1
2 72 0 4 0 0 70 IBM, VGA
3 80 0 6 0 0 56 VESA

4 80 0 6 0 0 60 VESA
5
6
7 80 0 6 0 0 72 VESA
8 80 0 6 0 0 75 VESA

9 1 02 4 768 6 0 VESA
10 1024 768 70 VESA
11 1024 768 75 VESA
12 1280 720 60 VESA

13 1280 768 60 VESA

14 1360 768 60 VESA

R e s o lutio n

H o rizon ta l Verti cal

640 480

640 480
640 480

Frequ en cy (H z)

60 IBM, VGA

72 VESA
75 VESA

OPTIONAL

Information for users applicable in European Union
countries

This symbol on the product or on its packaging means that your electrical
and electronic equipment should be disposed at the end of life separately
from your household wastes. There are separate collection systems for
recycling in EU. For more information, please contact the local authority
or the dealer where you purchased the product.

English - 43 -

Specifications

Without fo ot

TV BROADCASTING

PAL/SECAM B/G D/K K' I/I' L/L'

POWER CONSUMPTION (W)

60W

1 W (Standby)

RECEIVING CHANNELS

VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
CABLE TV (S1-S20/ S21-S41)

NUMBER OF PRESET CHANNELS

100

CHANNEL INDICATOR

On Screen Display

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

220 - 240V AC, 50 Hz

AUDIO

Nicam

AUDIO OUTPUT POWER (W

RMS.

2 x 3 W

) (%10 THD)

PANEL

16:10 display, 19” screen size

DIMENSIONS (mm)

D L H

140
80

480
480

397

352

Weight ( kg)

5,4
5,1

With foot

English - 44 -

Pin specifications

Signal Input

PC RGB Terminal (D-sub 15-pin connector)

Pin Input signal

1 R
2 G or sync on green
3 B
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND

9 No connection
10 GND
11 No connection
12 [SDA]
13 H.sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]

• When different kinds of input signals are

simultaneously input to the monitor via a graphics

board or the like, the monitor will automatically

select the signals in the following priority order:

Sync signal type Priority

H/V s eparate sync. 1

H/V composite s ync. 2

sync.on Green * 3

• Even in the case of the recommended

signals shown on the following page,

there may be instances when correct

display is not possible. In this case, use

H/V separate sync, H/V composite sync.

HDMI connector pin specifications

Pin Input signal Pin Input signal

1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock­3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved (N.C. on device)
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0+ 17 DDC/CED Ground
8 TMDS Data0 Shield 18 +5V Power
9 TMDS Data0- 19 Hot Plug Detect

10 TMDS Clock+

SCART connector pin specifications

Pin I nput signal Pi n Input signal

1 A UDIO OUT (RIGHT) 12 Not used
2 AUDIO IN (RIGHT) 13 RGB-R GND
3 AUDIO OUT (LEFT/MONO) 14 GND
4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN
5 RGB-B GND 16 BLANKING SIGNAL
6 AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND
7 RGB-B IN 18 BLANKING SIGNAL GND
8 AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT

9 RGB-G GND 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN
10 Not used 21 GND / SHIELD (CHASSIS)
11 RGB-G IN

English - 45 -

Electrical connection

For your own safety read the following instruction carefully before attempting to connect this

unit to the mains supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

GREEN

&

YELLOW

(Earth)

(if there is

earth cable)

BLUE

(Neutral)

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond with

the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal which

is marked with the letter E, or by the earth symbol, or coloured green or green and

yellow.

The wire which is coloured blue or black must be connected to the terminal which is

marked with the letter N or coloured Black.

The wire which is coloured brown or red must be connected to the terminal which is

marked with the letter L or coloured Red.

For continued protection against risk of fire, replace only with same type and rating of

fuse (ASTA approved 5A 250VAC fuse).

FUSE

BROWN

(Live)

CAUTION

To prevent electric shock disconnect this appliance from the mains before removin

the cover. Repairs should only be carried out buy authorised service personnel and

only genuine spare parts should be used

.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS W HEN NOT IN

USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

English - 46 -

g

www.electrolux.com

www.electrolux.co.uk

315 9110 13-D-01052008