Electrolux ERC925DSD User Manual

ERC925DSD
User manualCanopy rangehood
2 electrolux.com.au
Dear customer,
Thank you for purchasing an Electrolux rangehood. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
The symbols you will see in this booklet have these meanings:
WARNING
This symbol indicates information concerning your personal safety.
CAUTION
This symbol indicates information on how to avoid damaging the rangehood.
CONTENTS
Important instructions ______________________________ 3
Before using your appliance _____________________ 3
Information on disposal for users ________________ 3
Important safety instructions ____________________ 3
Care & Cleaning ______________________________ 5
Description _______________________________________ 6
General hints ______________________________________ 7
Care & Cleaning ___________________________________ 8
Long life charcoal filter _________________________ 8
Grease filters _________________________________ 8
Replacing the lamps ___________________________ 8
Troubleshooting ___________________________________ 9
Technical data ____________________________________ 10
Installation _______________________________________ 11
Recirculated _________________________________ 21
Ducted _____________________________________ 33
Warranty _________________________________________ 43
IMPORTANT
This symbol indicates tips and information about use of the rangehood.
ENVIRONMENT
This symbol indicates tips and information about economical and ecological use of the rangehood.
CONDITIONS OF USE
This appliance is intended to be used in household and similar applications such as:
Staff kitchen areas in shops, offices and other working environments
Farm houses
By clients in hotels, motels and other residential type environments
Bed and breakfast type environments
Catering and similar non-retail applications
Record model and serial number here:
Model number: ____________________________________
Serial number: _____________________________________
IMPORTANT INSTRUCTIONS
Important Information that may impact your Manufacturer’s Warranty
Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the Electrolux manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Electrolux manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual.
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
WARNING
The wire connection has to be done by specialized technician.
The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.
BEFORE USING YOUR APPLIANCE
Before you use the appliance, we recommend that you read through the relevant sections of this manual, which provides the description of your appliance and its functions.
To avoid the risks that are always present when you use an appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
This appliance complies with the requirements of Australian Standards AS/NZS 60335.2.31
IMPORTANT
Check for any damage or marks. If you find the appliance is damaged or marked, you must report it within 7 days if you wish to claim for damage/ marks under the manufacturer’s warranty. This does not affect your statutory rights.
INFORMATION ON DISPOSAL FOR USERS
ENVIRONMENT
Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
If you wish to discard this appliance, please contact your local authorities and ask for the correct method of disposal.
The minimum safety distance between the cooker top and the extractor hood is: for electrical hob 600mm and for gas hob 650mm.
If the instructions for installation for the gas hob specify a greater distance, this must be respected.
Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
CAUTION
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
For Class I appliances, check that the domestic power supply guarantees adequate earthing.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. The route of the flue must be as short as possible.
If the extractor is used in conjunction with non­electrical appliances (e.g. gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. When the cooker hood is used in conjunction with appliances supplied with energy other than electric, the negative pressure in the room must not exceed 0,04 mbar to prevent fumes being drawn back into the room by the cooker hood.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
If the supply cord is damaged, it must be replaced from the manufacturer or its service agent.
4 electrolux.com.au
IMPORTANT INSTRUCTIONS (CONTINUED)
Connect the plug to a socket complying with current regulations, located in an accessible place.
With regards to the technical and safety measures to be adopted for fume discharging it is importat to closely follow the regulations provided by the local authorities.
WARNING
Before installing the Hood, remove the protective films.
Use only screws and small parts in support of the hood.
WARNING
Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
Connect the hood to the power net by using a bipolar switch having a contact gap of at least 3 mm.
Do not look directly at the light through optical devices (binoculars, magnifying glasses…).
Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides.
Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.
CAUTION
Accessible parts may become hot when used with cooking appliances.
Do not flambè under the range hood; risk of fire.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING
Accessible parts may become hot when used with cooking appliances.
Clean and/or replace the Filters after the specified time period (Fire hazard).
There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room)
Switch off or unplug the appliance from the mains supply before carrying out any maintenance work.
The top of the hood must not to be used as a shelf.
The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.
Never use the hood for purposes other than for which it has been designed.
Never leave high naked flames under the hood when it is in operation.
CARE AND CLEANING
Grease filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher.
Clean the hood using a damp cloth and a neutral liquid detergent.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
5
6 electrolux.com.au
DESCRIPTION
1
2
3
5
CONTROL PANEL
1
Upper chimney
2
Lower chimney
3
Hood body
6
4
LED Lighting
5
Grease filter
6
Control panel
4
A
B C D E
button function
A = Off Turns off the motor.
Turns the motor on at speed 1.
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn
B = Speed
the Activated Charcoal Filter alarm on. LED (A) flashes twice to confirm
To turn the alarm off, press the button again and hold for at least 2 seconds. The relevant LED flashes once (A).
Turns the Motor on at speed 2.
C = Speed
Press and hold the button for 2 seconds to activate delay off function for speed 1, 2 and 3. After 6 minutes the fan will automatically turn off.
Turns the motor on at speed 3.
D = Speed
Press and hold for 2 seconds to activate intensive Boost speed. After 6 minutes, the motor will automatically return to the speed that the hood was previously set to.
Press briefly: Turns the lighting system on and off at maximum intensity
E = Light
Press and hold to change the lighting intensity up or down.
GENERAL HINTS
Switch ON the hood at minimum speed when you start cooking and kept it running for few minutes after cooking is finished.
Increase the speed only in case of large amount of smoke and vapour and use boost speed(s) only in extreme situations.
Replace the charcoal filter(s) when necessary to maintain a good odour reduction efficiency.
Clean the grease filter(s) when necessary to maintain a good grease filter efficiency.
Use the maximum diameter of the ducting system indicated in this manual to optimize efficiency and minimize noise.
Hob to Hood remote control
NOTE: This Hood can be switched on remotely by certain cooktops that have compatible Hob to Hood capability.
7
The Hob to Hood remote capability is always active for this hood, just install it above a compatible cooktop with Hob to Hood capability to use this feature directly.
8 electrolux.com.au
CARE AND CLEANING
WARNING
Switch off or unplug the appliance from the mains supply before carrying out any maintenance work.
IMPORTANT
Clean the hood using a damp cloth and a neutral liquid detergent.
Long Life Carbon Filter
The anti-odour filter can be washed and regenerated every 3-4 months (or more frequently if the hood is subject to intensive use), up to a Max. of 8 regeneration cycles (in case of particularly intensive use it is recommended that you do not exceed 5 cycles).
Regeneration procedure:
Wash in the dishwasher at a Max temperature of 70ºC or hand wash in hot water without using abrasive sponges (do not use detergents!).
Dry in the oven at a Max temperature of 70ºC for 2 hours or dry at room temperature, standing the filter in a vertical position to facilitate drainage.
Grease Filters
Clean or replace the filters continuously according to below time intervals, to maintain good performance of the hood and to prevent a potential fire hazard, caused by excessive grease build-up. The grease filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher.
NOTE: Replacement carbon filters are available from Electrolux spare parts.
Replacing the lamps
For replacement, please contact an Authorised Service Center.
TROUBLE SHOOTING
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact an authorized service center.
problem possible cause solution
9
Appliance not stable
Appliance is not in horizontal position
Performance in terms of oil capture are not satisfying
Appliance does not work
The light does not work
Noise of hood is higher than customer expectation.
The appliance is not correctly installed Follow the Installation instruction
enclosed to the appliance.
The appliance is not correctly installed Follow the Installation instruction
enclosed to the appliance.
Oil and grease on metal filters or charcoal filters.
The appliance is not correctly connected Verify that the main cable is
The LED is broken For replacement, contact the
Air outlet diameter in the wall is too small, causing a pressure drop and an increase in motor speed.
Product is installed in recirculation mode. Product in recirculation mode (and
More than one bend in the ventilation duct.
Follow the cleaning frequency of filters as described in the user manual
connected to the motor group or the plug is connected to the socket
Authorised Service Centre.
Follow the Installation instruction enclosed to the appliance.
using a charcoal filter) will generate an higher noise than a product in extration mode.
If the exhaust system in the building has multiple bend in or a long distance, this can increase the noise of the product.
Before contacting the Authorised Service Centre:
Switch the appliance on again to see if the problem has disappeared. If not, switch it off again and repeat the operation after an hour.
If your appliance still does not work properly after carrying out the checks listed in the troubleshooting guide and switching the appliance on again, contact the Authorised Service Centre, clearly explaining the problem and specifying:
the type of fault;
the model;
the type and serial number of the appliance (given on the rating plate).
10 electrolux.com.au
TECHNICAL DATA
unit value
Product Type Wall mounted hood
Width mm 898
Dimensions
Airflow max (Exhaust mode)
Noise min/max (sound power level)
Total Powe r W 274
Lamps info
Installation minimum height - gas hob mm 650
Installation minimum height - elec hob mm 600
Net Weight Kg 15
Depth mm 460
Height min/max mm 800/1250
3
/h 790
m
dBA 50/70
Type Rectangular LED
Number & Power 2x 2W
Socket N/A
INSTALLATION
The hood has been designed to be installed and used either as a “Exhausted mode”, or as a “Recirculation mode”.
Exhausted mode
Cooking steam is sucked and channelled outside the house through a discharge duct (not supplied), fitted to the hood steam outlet.
11
C
Ensure that the discharge duct is correctly fitted to the air outlet, unit using an appropriate connection system.
NOTE: It is not recommended to have a carbon filter fitted when operating in exhausted mode
Recirculation mode
The air is filtered through one or more the charcoal filters, and then resent into room.
IMPORTANT
Ensure appropriate air circulation around the hood.
IMPORTANT
If the hood is supplied without charcoal filters and installed on recirculation mode, these must be fitted before the hood can be used. Filters are available in shops. The hood should be installed away from particularly dirty areas, windows, doors and heat sources. The accessories for wall fixing are not included because wall made of different materials require different types of fixing accessories. Use fixing systems suitable for the walls of your home and the weight of the appliance. For more details, contact a specialised dealer. Keep this booklet for future consultation.
1x
2-4
1x
50 mmø
WARNING
Fixing devices for the wall are not included since different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home and for the weight of the appliance. For advice on suitable fixing systems, contact your local specialised dealer.
WARNING
Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
1x
1x
12 electrolux.com.au
INSTALLATION (CONTINUED)
IMPORTANT
Min. 930mm
Max. 1210mm
Min. 870mm
Max. 1150mm
60
300
260
460
898
Min. 800mm
Max. 1090mm
Min. 740mm
Max. 1030mm
60
300
260
460
898
13
14 electrolux.com.au
Min. 600mm
INSTALLATION (CONTINUED)
Min. 600mm
Min. 650mm
Loading...
+ 30 hidden pages