Electrolux EI23BC65KSBA Owner’s Manual
EN FRENCH DOOR BOTTOM
FREEZER/REFRIGERATOR
FR RÉFRIGÉRATEUR À PORTES
FRANÇAISES/CONGÉLATEUR EN BAS
ES REFRIGERADOR CON CONGELA-
DOR INFERIOR DE PUERTA DOBLE
USE AND CARE GUIDE
GUIDE D’UTILISATION ET D’ENTRETIEN
GUIA DE USO Y CUIDADO
807650602 March 2016
2
Finding Information
Please read and save this
guide
Thank you for choosing Electrolux, our
new premium brand in home appliances.
This Use & Care Guide is part of our
commitment to customer satisfaction and
product quality throughout the service life
of your new appliance.
Keep a record for quick
reference
Purchase date
Electrolux model number
Electrolux serial number
NOTE
Registering your product with Electrolux
enhances our ability to serve you. You can
register online at
www.electroluxappliances.com or by sending
your Product Registration Card in the mail.
Questions?
For toll-free telephone support in the U.S.
and Canada: 1-877-4ELECTROLUX
(1-877-435-3287)
For online support and product information
visit http://www.electroluxappliances.com
Table of contents
Finding Information .............................. 2
Safety .................................................... 3
Feature Overview .................................. 5
Installation ............................................ 6
Removing the Doors ........................... 11
Installing Door Handles ...................... 13
Connecting the Water Supply ............ 14
Controls .............................................. 16
Automatic Ice & Water Maker/Dispenser . 21
Automatic Ice Maker - Freezer .......... 23
Storage Features ................................ 24
Storing Food and Saving Energy ....... 29
Normal Operating Sounds ................. 30
Changing the Water and Air Filters .... 31
Care and Cleaning .............................. 33
Solutions to Common Problems ........ 36
Warranty .............................................. 41
Installation Checklist
Doors
Handles are secure and tight
Door seals completely to cabinet on
all sides
Freezer drawer is level across top
Leveling
Refrigerator is level, side-to-side and
tilted ¼ (6mm) front-to-back
Toe grille is properly attached to
refrigerator
Cabinet is setting solid on all corners
Electrical Power
House power turned on
Refrigerator plugged in
Ice Maker
House water supply connected to
refrigerator
No water leaks present at all
connections - recheck in 24 hours
Ice maker is turned ON
Ice & water dispenser operates correctly
Front filter must be flush with filter
housing (select models)
Final Checks
Shipping material removed
Fresh food and freezer temperatures set
Crisper humidity controls set
Registration card sent in
Important safety instructions
Safety
3
Safety Precautions
Do not attempt to install or operate your unit
until you have read the safety precautions
in this manual. Safety items throughout this
manual are labeled with a Danger, Warning,
or Caution based on the risk type.
Definitions
This is the safety alert symbol. It is
used to alert you to potential personal
injury hazards. Obey all safety messages
that follow this symbol to avoid possible
injury or death.
DANGER
DANGER indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
WARNING indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION
CAUTION indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
IMPORTANT
Indicates installation, operation, or
maintenance information which is
important but not hazard-related.
General Safety
WARNING
• Do not operate the refrigerator in the
presence of explosive fumes.
• Avoid contact with any moving parts
of the automatic ice maker.
• Remove all staples from the carton to
avoid injury. Staples can also damage
finishes if they come in contact with
other appliances or furniture.
Child Safety
Packing Materials:
• Packing cartons covered with rugs,
bedspreads, plastic sheets, or stretch
wrap may become airtight chambers
and can quickly cause suffocation.
• Destroy or recycle the product’s carton,
plastic bags, and any other exterior
wrapping material immediately after
the refrigerator is unpacked. Children
should never play with these items.
Child Entrapment and Suffocation:
• These problems are not limited to the
past. Whether junked, abandoned,
or temporarily stored (even for a few
hours), unattended refrigerators and
freezers are dangerous. Please take
the precautions listed below.
Proper Disposal of Refrigerators/
Freezers
We strongly encourage responsible
appliance recycling/disposal methods.
Check with your utility company or visit
www.energystar.gov/recycle for more
information on recycling your old refrigerator.
Before you recycle or dispose of your
old refrigerator/freezer:
• Remove the doors.
• Leave the shelves and baskets in place
so children may not easily climb inside.
• Have refrigerant and compressor oil
removed by a qualified service technician.
Please read all safety instructions
before using your new refrigerator.
• Do not store or use gasoline or other
flammable liquids near this or any
other appliance. Read product labels
for warnings regarding flammability
and other hazards.
4
Grounding type wall receptacle
Power cord with 3-prong
grounded plug
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Safety
Electrical information
WARNING
You must follow these guidelines to
ensure that your refrigerator’s safety
mechanisms are operating correctly.
• The refrigerator must be plugged into
its own dedicated 115 Volt, 60 Hz,
AC-only non-GFCI electric outlet.
The power cord of the appliance
is equipped with a three-prong
grounding plug for your protection
against electrical shock hazards.
It must be plugged directly into
a properly grounded three-prong
receptacle. The receptacle must be
installed in accordance with local
codes and ordinances. Consult a
qualified electrician. Do not use an
extension cord or adapter plug.
• If the power cord is damaged,
it should be replaced by the
manufacturer, service technician, or a
qualified person.
• Never unplug the refrigerator by pulling
on the power cord. Always grip the
plug firmly and pull straight out from
the receptacle to prevent damaging
the power cord.
• To avoid electrical shock, unplug the
refrigerator before cleaning and before
replacing a light bulb or LED light.
• Performance may be affected if
the voltage varies by 10% or more.
Operating the refrigerator with
insufficient power can damage the
compressor. Such damage is not
covered under your warranty.
• Do not plug the unit into an outlet
controlled by a wall switch or pull cord
to prevent the refrigerator from being
turned off accidentally.
IMPORTANT
To turn off power to your refrigerator,
unplug the power cord from the wall
outlet.
Feature Overview
Luxury-Design
TM
Drawer (PTD) or Deli Drawer
TM
*Air Filter
*LED Light
Flipper GuideIce Maker
Ice Bin
Understanding features and terms
Your Electrolux refrigerator is designed for optimal convenience and storage flexibility.
The illustration below is provided to assist you with familiarizing yourself with product
features and terminology.
NOTE
*Features may vary according to model. Model is shown without freezer drawer cover.
Flipper Mullion
Luxury-Design
Shelves
TM
Shelves
5
Luxury-Glide
Crisper
Drawer
*Special
Items Mat
(Inside PTD)
TM
LED Lights
Water Filter
*Freezer Ice Maker
Removable
Ice Bin
Crisper
Drawer
*Tilt
Can Bin
TM
Luxury-Glide
*LED Light
*Soft
Soft-Closing *Perfect Temp
Freeze
Bin
(with humidity slides)
Freezer Baskets
with organizers
Toe Grille
IMPORTANT
Features not included with your
refrigerator can be purchased at
www.electroluxappliances.com or by
calling 1-877-435-3287.
*Wire Shelf
(inside freezer drawer)
6
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw
Top
Hinge
Screw
Components Provided:
Head
Wrench Set
Wrench
Tools Necessary:
Wrench
Installation
Required Tools
You will need the following tools:
Phillips™
Head or
#2 Square Drive
This Use & Care Guide provides general
installation and operating instructions
for your model. We recommend using a
service or kitchen contracting professional
to install your refrigerator. Use the
refrigerator only as instructed in this Use &
Care Guide. Before starting the refrigerator,
follow these important first steps.
Location
• Choose a place that is near a
grounded, non-GFCI, electrical outlet.
Do Not use an extension cord or an
adapter plug.
• If possible, place the refrigerator out
of direct sunlight and away from the
range, dishwasher, or other heat
sources.
• The refrigerator must be installed on a
floor that is level and strong enough to
support a fully loaded refrigerator.
• Consider water supply availability for
models equipped with an automatic
ice maker.
(OR)
AND OR
Socket
DO NOT install the refrigerator where
the temperature will drop below 55°F
(13°C) or rise above 110°F (43°C).
The compressor will not be able to
maintain proper temperatures inside
the refrigerator.
DO NOT block the toe grille on the
lower front of your refrigerator. Sufficient
air circulation is essential for the proper
operation of your refrigerator.
Installation
• Allow the following clearances for ease
Sides & Top 3/8 inch (9.5 mm)
Back 1 inch (25.4 mm)
If your refrigerator is placed with the
door hinge against a wall, you may have
to allow additional space so the door
can be opened wider.
Door opening
The refrigerator doors are designed to
shut by themselves within a 20 degree
opening.
Your refrigerator should be positioned
to allow easy access to a counter when
removing food. For best use of refrigerator
drawers and freezer baskets, the
refrigerator should be in a position where
both can be fully opened.
OR
Adjustable
3/8" Fixed
CAUTION
of installation, proper air circulation,
and plumbing and electrical
connections:
NOTE
NOTE
Installation
7
CAUTION
Do Not loosen or remove these 3 hex
screws.
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
Cabinet Leveling & Refrigerator Door Alignment
(if necessary)
Guidelines for final positioning of your
refrigerator:
• All four corners of the cabinet must
rest firmly on the floor.
• The sides should tilt ¼ inch (6 mm)
from front to back (to ensure that
doors close and seal properly).
• Doors should align with each other
and be level.
Most of these conditions can be met by
raising or lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1 Slightly open freezer drawer. Lift the
toe grille and gently pull forward (see
illustration).
2 You can raise or lower each door.
Use a 3/8 inch socket wrench to turn
the adjustment screws (1 per side).
Toe Grille Must
Fit in Slot on
Anti-tip Bracket
Screw/Washer
Assembly
To raise: turn adjustment screw
clockwise.
To lower: turn adjustment screw
counterclockwise.
3 Ensure both doors are bind-free with
their seals touching the cabinet on all
four sides and that cabinet is stable.
4 After unit is leveled, lower anti-tip leg
until it contacts the floor.
Door
Anti-tip
Leg
5 Install the toe grille by fitting into
place.
Door
Raise
Lower
(3) Retaining Clips
8
Installation
To adjust the door stop:
Door stop is adjustable between 85 to 145
degrees.
NOTE
View shown is looking up at the bottom
of the refrigerator door.
Lower
Hinge
Min
Open
Max
Open
Adjustable Door Stop
1 Open door to provide access to
screw.
2 Loosen screw.
3 Adjust door to desired location.
Door
Stop
Screw
5 Re-tighten screw.
Rotate Door
Stop
Re-tighten
Screw
Re-tighten Screw
6 Ensure door stops in desired location
before resuming normal use.
To level the doors using the adjustable
lower hinge (select models):
1 Remove all food items from door bins
on door being adjusted.
2 Open doors to 90 degrees.
Rotate
Door to Desired
Location
Adjusting Door
4 Rotate door stop until it makes
contact with the lower hinge.
Open
Door
90
Degrees
Bottom of Door
NOTE
Adjustable hinge should only be used
after doors have been leveled with
rollers.
Installation
9
3 Lift the door while adjusting the
washer. To raise the door, rotate
washer clockwise (when viewed from
the bottom). To lower door, rotate
washer counter-clockwise (when
viewed from the bottom).
Door
Lower
Door
Hinge
Washer
Raising/Lowering Door
To adjust the flipper mullion:
1 Loosen the screw located on the
flipper mullion hinge.
Raise
Door
Flipper
Mullion
2 Adjust flipper mullion height. For
proper connection with the flipper
mullion guide, there should be a
separation about the thickness of
a coin (0.060 inches, or 1.5 mm)
between the guide and flipper
mullion.
Mullion
Guide
Flipper
Mullion
Thickness
of a Coin
Adjusting Flipper Mullion Height
3 Re-tighten screw.
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
Screw
10
Installation
Installing Shelves
Your refrigerator was shipped with the
shelf hanger and shelf locking clip installed
in their shipping position. Below are the
instructions to install the shelves in your
desired locations.
1 Remove shelf from its locked position
by pulling the slide mechanism
toward you.
2 Lift the hanger directly upwards and
pull toward you to remove it from the
ladder.
4 Relock shelf by pushing the slide
mechanism away from you.
5 While holding shelf at a 45-degree angle
with the gray handle facing you, push
the shelf into the back of the hanger.
3 Place top hooks of the hanger into
the desired slot, and lower straight
down until lower hooks rest on the
ladder.
CAUTION
Shelves must be removed prior to
moving the refrigerator.
6 Gently set the shelf onto the hanger
once the back is secured by the hanger.
Removing the Doors
Hinge
Front
11
Getting through narrow
spaces
If your refrigerator will not fit through an
entrance area, you can remove the doors.
Check first by measuring the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord
is unplugged from the wall outlet.
2 Open the freezer drawer and remove
the toe grille (see Installation section).
3 Remove any food from the door
shelves and close the doors.
To remove the top hinge covers:
1 Remove the two screws from each
cover over the top door hinges.
2 Lift inside edge of hinge cover and tilt
back.
Rear
Cover
Screw
Ground
Screw
Top
Top Hinge
Cover
Hinge
Screws
Multi-wire
Cables
Cover Screw
NOTE
DO NOT remove the ground screw from
hinge.
To remove the refrigerator doors:
1 Trace lightly around the door’s top
hinges with a pencil. This makes
reinstallation easier.
2 Disconnect the harness by grasping
both sides of the connector firmly,
depress the latch, and pull apart.
Remove the two screws from the top
hinge. Lift the door off of the bottom
hinge and set it aside.
Leave
Hinge
With
Door
Rear
Cover
Screw
Top
Hinge
Ground
Screw
Front
Cover Screw
Water
Line
Top Hinge
Cover
Hinge
Screws
Two Wire
Cables
Leave
Hinge
With
Door
3 Detach the water tube from the
connector located behind the
refrigerator and pull the tube back out
to the front of the unit. The connector
releases when you press inward on
the outer sleeve while pushing the
tube toward the connector then while
continuing to hold in the sleeve, pull
the tube away.
12
Removing the Doors
4 Unscrew the three lower hinge
screws and hinge if necessary.
NOTE
Use care while pulling the water tube
from the unit to be sure that you do not
kink the tube.
Press
Press
Water
Line
Approximately
5 Feet
NOTE
You will be pulling approximately five
feet of water tube from the back of the
refrigerator.
To reinstall the right door, reverse the
above steps.
Lower Hinge Removal
CAUTION
Be sure doors are set aside in a
secure position where they cannot
fall and cause personal injury, or
damage to the doors or handles.
CAUTION
Drawer is heavy. Use caution when
lifting.
Removing Freezer Drawer
1 Remove 4 hex head drawer screws.
2 Lift up drawer to remove.
DO NOT
Remove
Other
Screws
Remove
Hex Head
Drawer Screw
Replacing Freezer Drawer
1 Lower drawer back into place.
2 Replace 4 hex head drawer screws
and tighten.
Once both doors are in place, ensure they
are aligned with each other and level (Please
see the Installation section for more
details), and replace the top hinge cover.
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure you do not kink the tube.
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
Installing Door Handles
13
Door Handle
Mounting
Instructions
1 Remove handles from
protective packaging.
2 Position fresh food
handle end caps (A)
over upper and lower
pre-installed shoulder
bolts (B) that are
fastened into door,
ensuring the holes for
the set screws are
facing towards the
opposite door.
3 While holding handle
firmly against door,
fasten upper and
lower Allen set screws
(C) with supplied Allen
wrench.
4 Repeat steps 2 and
3 to install opposite
handle. Ensure the
holes for the set
screws are facing
towards the first door.
5 Position freezer
handle end caps
over left and right
pre-installed shoulder
bolts that are fastened
to the drawer,
ensuring the holes for
the set screws are
facing down.
6 While holding handle
firmly against drawer,
fasten left and right
Allen set screws (C)
with supplied Allen
wrench.
End
Cap
End
Cap
Mounting Refrigerator Handles
End
Cap
Mounting Freezer Handle
End
Cap
End
Cap
End
Cap
NOTE
To ensure that handles are flush with doors/drawer, make sure that set screws are
completely tightened.
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these
handles.
Loading...