Electrolux E36GC70ISS, E30GC70ISS, E30IC80ISS, E36IC80ISS User Manual
30" INDUCTION COOKTOP
Configuration
FEATURES
Black Vitroceramic Glass Surface
10" Element – 2500W/ 3800W
8" Element – 2400W/ 3400W
7" Element – 1900W/ 2600W
6" Element – 1500W/ 1900W
Precision Touch Controls
A.D.A. Compliant*
ACCESSORIES
Granite Countertop Installation Kit – PN# 903061-9010
SPECIFICATIONS
Overall Exterior Dimensions –
Height
Width
Depth
Power Supply Location
Amps@ 240/208 Volts
Connected Load (kW Rating) @ 240/ 208 Volts
Electrical – Single phase 3- or 4-wire cable, 120/ 240V or
120/ 208V, 60Hz, fused on both sides of line with ground.
Armored Electrical Cable
Approved for Single Oven Combination Installation**
Approved for Downdraft Vent Combination Installation**
Shipping Weight (Approx.)
*When properly installed, meets the appliance standards in the Americans with Disabilities
Act and the Architectural Barriers Act Accessibility Guidelines as published by the United
States Access Board on June 23, 2004, as amended August 5, 2005.
**Approved to be used over any Electrolux ICON®Single Wall Oven and in combination
with an Electrolux ICON®Downdraft Vent.
NOTE: Always consult local and national electric codes. Refer to Product Installation
Guide for detailed installation instructions on the web at electroluxicon.com.
Specifications subject to change.
4 Induction Elements
Yes
1
1
1
1
Yes
Yes
Optional
Yes
4-3/8"
30-3/4"
21-1/2"
Middle Right Rear
32.0/ 32.0
7.7/ 6.7
Required
Included
Yes
Yes
58 Lbs.
electroluxicon.com
Induction Cooktop
E30IC80ISS
More Responsive
Cooking with induction is more responsive
than gas or electric — you can instantly adjust
the heat to a delicate simmer or bring it to a
quick boil.
Powerful Cooking Elements
Four induction elements, including a 10"
(2500W/3800W), an 8" (2400W/3400W), a
7" (1900W/2600W) and a 6" (1500W/1900W)
combine to create remarkably adaptable
cooking areas.
Precision Touch Controls
Fifteen preset touch settings provide a level of
digital heat control that inspires confidence in
even the most particular chef.
Power Assist
™
Generates rapid heat for a quick boil.
Induction Cooktop
E30IC80ISS
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
250 Bobby Jones Expressway •Augusta, GA 30907 •1-877-4electrolux (1-877-435-3287)
•
electroluxicon.com
CANADA
•
5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352
•
electroluxicon.ca
E30IC80ISS 10/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
30" Induction Cooktop Specifications
•
Product Weight – 44 Lbs.
•
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz,
fused on both sides of line with ground.
•
Connected Load (kW Rating) @ 240/208 Volts = 7.7/6.7kW
•
Amps @ 240/208 Volts = 32.0/32.0 Amps
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and national electric codes.
•
Allow 2"space below armored cable opening to clear electrical
cable and allow space for installation of junction box on wall at
back of cooktop.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum
width of appliance.
•
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
•
Allow 1-1/2" minimum clearance between rear edge of cutout and
nearest combustible surface above countertop.
•
Allow 7-1/2" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
•
It is recommended that drawers not be used beneath cooktop.
•
To reduce risk of fire when using overhead cabinetry, install vent hood
that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
•
Induction Drop-In Cooktop model E30IC80ISS is approved to be
used over any Electrolux ICON®Single Wall Oven. (Refer to Electric
Cooktop Installation Over 30" Electric Single Wall Oven Specifications
page on web.)
•
Induction Drop-In Cooktop model E30IC80ISS is approved to be
used in combination with an Electrolux ICON®30" Downdraft Vent.
(Refer to Drop-In Cooktop/ Downdraft Vent Countertop Preparation
page on web for detailed installation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
•
Granite Countertop Installation Kit – (PN# 903061-9010).
41/2"
71/2" min. to nearest
combustible wall
(either side of unit)
24"
1
1
/2" min. recommended
distance between rear
edge of cutout and
nearest combustible
surface above countertop
10"
12"
Approximate location
of junction box
21/2" min. from edge of cutout
to front edge of countertop
4"x 8" opening
to route armored cable
25"min.
203/8" min.
20
1
/2" max.
29
5
/8"min.
29
3
/4"max.
13"
max.
cabinet
depth
18"
min.
30" min. for
unprotected cabinet
24" min. for
protected surface
30 3/4"
1
/4"
211/2"
3"
287/8"
303/4"
197/8"
43/8" to
service
panel
Countertop
43/8"
7" 11"
Front Rear
Side View
1
/4"
Service panel
Cooktop
Countertop
3"
Loading...