Electrolux AW 410 User Manual
Specifications and Main Features
- Model No: AW 410
- Dimensions:
- Height: 85 cm (23.6’’)
- Width: 60 cm (23.6’’)
- Depth: 57 cm (22.4’’)
- Power Supply Voltage: 220-240 V / 50 Hz
- Total Power Absorbed: 2600 W (13 A)
- Water Pressure:
- Minimum (hot): 5 psi
- Minimum (Cold): 7 psi
- Maximum: 110 psi
- Maximum Recommended Load:
- Cotton, Linen: 4.5 kg (10 lbs)
- Synthetics, Delicate Fabrics: 2 kg (4.5 lbs)
- Wool: 1 kg (2.2 lbs)
- Spin Speed: Maximum 800 RPM
- Compliance: The appliance meets radio interference suppression requirements as outlined by E.E.C. directive No. 87/308 of 2.6.87.
Frequently Asked Questions
Q: What is the maximum load for cotton and linen?
A: The washing machine has a maximum allowable load of 4.5 kg (10 lbs) when washing cotton and linen fabrics.
Q: What should I do if the machine does not start?
A: Make sure to securely latch the door, and check the fuse for any faults before seeking assistance from a technician.
Q: Is it possible to use the machine for washing wool?
A: Wool can be washed, although there is a high limit of 1 kg (2.2 lbs) set for the wool wash.
Q: How often should I clean the detergent dispenser drawer?
A: Regular cleaning of the drawer with hot running water should suffice since detergent and fabric softeners may leave behind tributes.
Q: What is the use of the HALF LOAD button?
A:The HALF LOAD button is intended to minimize the amount of water consumption during the rinse for small quantities of cotton or linen (maximum capacity = 2.25 kg).
Q: What is the maximum temperature range for washing delicate synthetics and wool?
A:For delicate synthetics and wool garments, a maximum wash temperature never exceeds 40 °C must be used.
Q: How do I install the drain hose?
A:The hose for draining water does not require any installation but can be draped over the sides of a bowl, fitted into the pipe junction of a bowl or inserted in the drain pipe straight but with some care.
Q: What if the machine shakes too much during use?
A:Check that all transit bolts and packing have all been taken off and also check that the machine sits level and has its feet firmly on the floor.
User Manual
Loading...