Electrolux air-o-chill
Blast Chiller/Freezers 180kg 20GN2/1
Internet: http://www.electrolux.com/foodservice
HDBB0502011-06-07Subject to change without notice
WATER REMOTE UNIT CHILLER+C/FREEZER180KG 880052 880052 880052
TROLLEY TRAY RACK 20X2/1GN,63MM PITCH-LW 922044 922044 922044
TROLLEY TRAY RACK 16X2/1GN,80MM PITCH-LW 922046 922046 922046
THERMAL COVER FOR 20 GN 2/1-LW 922049 922049 922049
PRINTER FOR HACCP BASIC VERSION 881532 881532 881532
PASTRY TROLLEY 16(400X600)80MM-20 2/1 LW 922069 922069 922069
KIT HACCP EKIS 922166 922166 922166
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183 880183 880183
BANQ.TROLLEY-92PLATES-85MM PITCH-20GN2/1 922055 922055 922055
AIR REMOTE UNIT CHILLER+C/FREEZER180KG 880051 880051 880051
3-POINT-SENSOR PROBE-BL.C/FREEZERS LW 880212 880212 880212
3 SINGLE-SENSOR PROBES-BL.C/FREEZERS LW 880215 880215 880215
2 SINGLE-SENSOR PROBES-BL.C/FREEZERS LW 880214 880214 880214
1 SINGLE-SENSOR PROBE-BL.C/FREEZERS LW 880213 880213 880213
ACCESSORIES
3-POINT-SENSOR PROBE-BL.C/FREEZERS LW 1 1 1
INCLUDED ACCESSORIES
Net weight - kg. 438 438 438
installed-electric 1.735 1.735 1.735
Power - kW
at evaporation temperature - °C -10 -10 -10
Refrigerant power
Refrigeration power - W 20200 20200 20200
Refrigerant type R404a R404a R404a
N° defrost in 24 hrs. 3/30' 3/30' 3/30'
Max load capacity - trays h 65 mm - n° 20 20 20
Trays type 600x400; GN 2/1 600x400; GN 2/1 600x400; GN 2/1
Door hinges Right Side Right Side Right Side
N° and type of door 1; 2; 1;
height 2230 2230 2230
depth/with open doors 1260, 2099 1260, 2099 1260, 2099
width 1400 1400 1400
External dimensions - mm
Thermometers Digital Digital Digital
Thermostat Electronic Electronic Electronic
Cooling unit Remote Remote Remote
Gross capacity (D.I.N. 8952) - l. 2841 2841 2841
UK Guide lines - chilling / freezing 180, 170 180, 170 180, 170
NF Regulations - chilling / freezing 144, 144 144, 144 144, 144
Productivity per cycle - kg.
Type J - FREEZERS - 180 KG -
GN 2/1
J - FREEZERS - 180 KG -
GN 2/1
J - FREEZERS - 180 KG -
GN 2/1
TECHNICAL DATA
AOF2028CRD
726860
AOF2028CRT
726861
AOFP2028CR
726859
CONSTRUCTION
• Internal and external finishing in
stainless steel 304 type.
• High density polyurethane
insulation, 60 mm tickness, HCFC
free.
• Environmentally friendly: R404a as
refrigerant fluid.
• Developed and produced in ISO
9001 and ISO 14001 certified factory.
• Inner cell with fully rounded corners.
• Door equipped with removable
magnetic gasket with hygienic design.
• All motors and fan waterproof
protected IP21.
• Evaporator with anti-rust
protection.
• Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
• Automatic heated door frame.
• Solenoid valves.
• 1 thermostatic expansion valve.
• Stand alone printer as optional, built
in on request.
• PC connection on request, gate RS
485.
INSTALLATION
• No water connections required.
• Waste can be plumbed into drain,
but can also be collected in optional
waste container.
Installation diagram:
C - Water drain
I - Electrical connection
Y - Connection for appliance lifting
L - Remote electrical connection
N - Cooling water inlet
O - Cooling water outlet