Electrolux 900 User Manual

Elco 900

100 litre gas bratt pans

The Electrolux 900-Line of modular cooking equipment is designed to meet the heavy duty cooking
requirements of institutional caterers and the larger restaurants and hotel kitchens. The flexibility of the
modular design, with innumerable configurations either free-standing, bridged or cantilever, can be precisely
tailored to meet the needs of the caterer. The models detailed on this sheet are 100 litre gas bratt pans.

EASY TO INSTALL

• Main connections can be via the
base of the unit.

• All models provided with service
duct to facilitate installation.

• All models can be installed on
cantilever system.

EASY TO CLEAN

• Well and double skinned
lid/worktop in 304 AISI stainless
steel.

• Front, side, rear and bottom
panels in stainless steel with
Scotch Brite finish.

• All models have right-angled
side edges to allow flush-fitting
joins between units, eliminating
gaps and possible dirt traps.

• The special design of the control
knob system guarantees against
water infiltration.

EASY TO USE

• Burners in 304 AISI stainless
steel with optimized combustion,
flame failure device to protect
against accidental extinguishing of
the flame and automatic iginition
with electronic flame control.

• Choice of well cooking surface in
mild steel or compound (3 mm of
316 AISI stainless steel on top of
12 mm of mild steel).

• Mild steel: dry cooking and
regular frying.

• Compound: like mild steel but
also damp cooking.

• Working temperature (from
120°C to 300°C) controlled
through a thermostat and energy
input through an energy regulator.

• All the Bratt Pans incorporate an
AISI tap as standard.

210303

• Manual tilt mechanism to
facilitate the emptying of the Bratt
Pan.

• All gas appliances are supplied
for use with natural gas, with LPG
conversion jets supplied as
standard.

EASY TO MAINTAIN

• IPX5 water protection.

EASY ON THE ENVIRONMENT

• 98% recyclable by weight.

• CFC free packaging.

Elco 900

100 litre gas bratt pans

ZBRTG4M

210303

ZBRTG4MA

210304

ZBRTG4S

210305

ZBRTG4SA

210306

TECHNICAL DATA

Power supply Gas Gas Gas Gas
External dimensions - mm
width 1000 1000 1000 1000
depth 930 930 930 930
height 850 850 850 850
height adjustment 50 50 50 50

Thermostatic valve ● ● ● ●
Temperature limiter ● ● ● ●

Working temperature - min/max - °C 120, 300 120, 300 120, 300 120, 300
Power - kW
gas 24 24 24 24
Power - kW
installed-electric 0.2 0.2 0.2 0.2
Net weight - kg. 180 180 180 180
Supply voltage 230 V, 1N, 50/60 230 V, 1N, 50/60 230 V, 1N, 50/60 230 V, 1N, 50/60

ACCESSORIES

*NOT TRANSLATED* 206305 206305 206305 206305
2 PANELS FOR SERVICE DUCT (BACK TO BACK) 206202 206202 206202 206202
2 PANELS FOR SERVICE DUCT (SINGLE INST.) 206181 206181 206181 206181
2 SIDE KICKING STRIPS 206180 206180 206180 206180
2 SIDE PANELS FOR GRILL / BRATT PAN 206207 206207 206207 206207
DRAUGHT DIVERTER WITH 150 MM DIAMETER 206132 206132 206132 206132
FLANGED FEET KIT 206136 206136 206136 206136
FLUE CONDENSER FOR 1 MODULE DIAM.150MM 206156 206156 206156 206156
FRONTAL KICKING STRIP 1000 MM 206177 206177 206177 206177
FRONTAL KICKING STRIP 1200 MM 206178 206178 206178 206178
FRONTAL KICKING STRIP 1600 MM 206179 206179 206179 206179
FRONTAL PANEL FOR 100 LT BRATT PAN 206200 206200 206200
JUNCTION SEALING KIT 206086 206086 206086 206086
KIT 4 FEET GRILL/BRATT PAN-CONCRETE INST 206163 206163 206163 206163
MATCHING RING FOR FLUE CONDENSER 150DIAM 206133 206133 206133 206133
PRESSURE REGULATOR FOR GAS UNITS 927225 927225 927225 927225
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138 206138 206138
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137 206137 206137

CAMB0102009-07-04

Internet: http://www.electrolux.com/foodservice