Electrolux 534114, 534115, 534132, 534133, 534113 User Manual

Electrolux Dishwashing

Rack Type WTM250

The Electrolux Dishwashing range is produced for customers with the highest conceivable demands for good
efficiency, economy and ergonomics for dishwashing operation. The product range comprises glasswashers,
undercounter dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot
and pan washers. The rack type dishwasher range is designed to be easily connected with the equipment
included in the Electrolux Handling System range, to create a functional and ergonomic dishwashing area. The
rack type dishwasher WTM250 has a capacity up to 250 racks per hour with 2 speeds (variable on-site). The
range consists of 6 electrically or steam heated models, available with or without Energy Saving Device (ESD).

EASY TO INSTALL

• Solid 3mm square stainless steel
sub-frame with bolt-together
construction that can be delivered
assembled or in modules to be
connected on site.

• Stainless steel wash pumps
ideal for heavy duty usage
installations.

• Brass inlet valves as standard for
extra reliability at high incoming
water temperatures.

• All rear positioned water tubes in
stainless steel.

• Only one cable for electrical
connection.

• Electrical and water connections
centralised in one area.

• Service from the front and from
the side.

• Pre-arrangements for automatic
detergent dispenser, energy
management device and HACCP
implementation (both basic as well
as integrated system).

FUNCTIONAL ZONES

• Separate 100 litre pre-wash zone
with 1,1kW pump where first soil
scrapping is performed. Separate
zone, at less than 35°C, without
chemicals for maximum dirt
removal and incorporates
automatic partial drain.

• Power wash zone with 150 litre
wash tank with 2,2kW wash pump
supplying upper was arms, 1,1kW
wash pump supplying lower was
arms. Maximum water contact
wash arms for best possible
washing result.

534115

• Separate wash and rinse zones
so detergent does not mix with the
rinse aid and is always active.

• Rinse area equipped with the
DUO-rinse system where the first
ramp is filled by the re-used final
rinse water, to eliminate any trace
of detergent, and the second ramp
is filled by hot fresh water to
guarantee sanitation of the items.

• Atmospheric boiler combined
with the rinse booster pump for
perfect rinsing performances in
terms of sanitation, energy saving,
independence from the water
pressure on the network.
Incorporates non-return (air gap
class A) valve.

• As optional extra the WTM250
can be equipped with a drying
zone for fast and efficient drying.

Electrolux Dishwashing

Rack Type WTM250

EASY TO CLEAN AND MAINTAIN

• The pre-wash, wash and rinse
tanks are pressed with completely
rounded corners and sloping base
to facilitate cleaning.

• WTM250 has smooth surfaces.
304 AISI stainless steel front and
side panels, strainers and wash
and rinse arms.

• Wash arms and double tank filter
(flat and deep box) easy to remove.

• Height adjustable stainless steel
feet.

• All models finished in top quality
materials with double skinned
construction to aid durability and
reduce noise.

• Self-draining wash pumps
provide maximum hygiene.

• Hinged flap for easy access to
the energy saving condenser unit.

• Large balanced inspection doors
for easy access to wash area.

• Self-cleaning cycle in pre-wash,
wash and rinse zones.

EASY TO USE

• Automatic start/stop function.

• Advanced electric control panel
with sound signals and visual
display.

• Counter balanced door with
safety switch and easy to grip
handle.

• Built-in rinse water heater to
increase the temperature of the
final rinse water.

• Electronic control panel with
autodiagnostic check control.

EASY ON THE ENVIRONMENT

• 35mm thickness foam injection
insulated doors to reduce noise

• Available with version equipped
with Energy Saving Device (ESD)
to pre-heat the incoming cold
water and to save up to 12kW of
energy. ESD incorporates a
condenser unit to decrease
temperature and humidity of the
outlet hot steam.

• Separate pre-wash, wash and
rinse tanks for lower water and
detergent consumption. No
overflow of the detergent from the
wash tank to the others and no
need for fresh water in order to
cool down the water in pre-wash
tank.

• 98% recyclable by weight.

• CFC free packaging.

• Low noise level <70dBA.

• Developed and produced in ISO
9001 and ISO 14001 certified
factory.

and reduce heat dispersion.

WTM250ERA

TECHNICAL DATA

Model Electronic - A Electronic - A Electronic - B Electronic - B Electronic - A Electronic - A
Power supply Electric Electric Electric Electric Steam & Electric Steam & Electric
Feeding direction from RH to LH from LH to RH from RH to LH from LH to RH from RH to LH from LH to RH
Energy Saving Device incl. cond. unit ● ● ● ●
Water supply
pressure min. , max. - bar 1.5, 7 1.5, 7 1.5, 7 1.5, 7 1.5, 7 1.5, 7
hot water inlet °C 50 50 50 50 50 50
cold water inlet °C 15 15 15 15 15 15
Capacity dishes/h 1st/2nd speed 4500, 2880 4500, 2880 4500, 2880 4500, 2880 4500, 2880 4500, 2880
Capacity baskets/h 1st/2nd speed 250, 160 250, 160 250, 160 250, 160 250, 160 250, 160
Air emission - m³/h 180 180 180 180
Insulation ● ● ● ● ● ●
External dimensions - mm
width 3263 3263 3263 3263 3263 3263
depth 884 884 884 884 884 884
height/with open door 1771, 2119 1771, 2119 1771, 2119 1771, 2119 1771, 2119 1771, 2119
Pre-wash
temperature - °C <35 <35 <35 <35 <35 <35
tank capacity - lt. 100 100 100 100 100 100
pump power - kW 2.2 2.2 2.2 2.2 2.2 2.2
1st wash
temperature - °C 55-65 55-65 55-65 55-65 55-65 55-65
tank capacity - lt. 150 150 150 150 150 150
pump power - kW 3.3 3.3 3.3 3.3 3.3 3.3
Duo rinse
temperature - °C 60-70 60-70 60-70 60-70 60-70 60-70
tank capacity - lt. 23 23 23 23 23 23
pump power - kW 0.35 0.35 0.35 0.35 0.35 0.35
Rinsing
temperature - °C 84 84 84 84 84 84
boiler capacity - lt. 12 12 12 12 12 12
boiler power - kW 16.5 16.5 16.5 16.5
water flow - liters/hr 300 300 300 300 300 300
Steam supply
relative dynamic pressure bar - min/max 1.5, 3 1.5, 3
Steam consumption peak - Kg/h 92 92
Total installed power - kW 44.2 44.2 44.2 44.2 9.7 9.7

ACCESSORIES

12 S/S PLUGS FOR WASH.ARMS-MODUL/COMP.RT 864239 864239 864239 864239 864239 864239
BASKET FOR 5 HALF INSULATED TRAYS-RED 867005 867005 867005 867005 867005 867005
DRAIN KIT FOR MODULAR+COMPACT RACK TYPE 864150 864150 864150 864150 864150 864150
EL. DRY. TUNNEL-CORNER-RIGHT-MODULAR RT 864512 864512
EL. DRYING TUNNEL-CORNER-LEFT-MODULAR RT 864513 864513
EL. DRYING TUNNEL-EL.MODULAR RT-L>R-600 864511 864511
EL. DRYING TUNNEL-EL.MODULAR RT-L>R-900 864501 864501
EL. DRYING TUNNEL-EL.MODULAR RT-R>L-600 864510 864510
EL. DRYING TUNNEL-EL.MODULAR RT-R>L-900 864500 864500
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW 867050 867050 867050 867050
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW 867051 867051 867051 867051
KIT SANITIZ(2 HEAT.EL)-MOD.RT 250/300R/H 864160 864160 864160 864160
KIT SILASTIC CURTAINS FOR RACK TYPE DW 864245 864245 864245 864245 864245 864245
SPLASH HOOD-MODULAR RACK T.-LOADING SIDE 865177 865177 865177 865177 865177 865177
STEAM DRYING TUNNEL-MODULAR RT-L>R-900 864515
STEAM DRYING TUNNEL-MODULAR RT-R>L-900 864514

534112

WTM250ELA

534113

WTM250ERB

534114

WTM250ELB

534115

WTM250SRA

534132

WTM250SLA

534133

IEBE0102009-06-19Subject to change without notice

Internet: http://www.electrolux.com/foodservice