Electrolux 2100 User Manual
BEFORE OPERATING YOUR VACUUM, PLEASE READ THESE INSTRUCTIONS CAREFULLY.
947-1562 EA-02444 48599
2100
Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
For Household Use
WARNING
To reduce the risk of fire, electrical shock, or injury:
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or
corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, or other
materials that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving par ts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without having dustbag and/or filter in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids such as gasoline. Do not use in areas where such liquids
may be present.
• Do not use if any electrical wire is damaged, cut, or punctured. Avoid picking up sharp objects.
• Turn off appliance before connecting or disconnecting hose or power attachments.
• Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
• Unplug before connecting non-electrical mechanical accessories.
• This appliance has a polarized plug (one blade is wider that the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way. Do not use adapters.
Save These Instructions
Fill in and Save
Stand your new 2100 cleaner upright and locate the serial number on the bottom side near the front wheel. Write it
here and retain it for future reference.
Serial No. ____________________________________________ Model No. ______________________________________
Date of Purchase __________________________________________________________________________________________
2
3
Introducing the
21OO by Electrolux
®
Vacuum Cleaner
The 2100 vacuum cleaner is a durable and versatile cleaning system designed for
convenience, ease of operation, and consumer safety.
The 2100 is equipped with specially designed fans and a powerful motor manufactured
to give the highest level of cleaning power. Its lightweight, sturdy construction is
designed to give years of quiet, trouble-free service. Wide-track wheels allow it
to glide smoothly over the deepest carpets. Vinyl wrap-around end and side
bumpers protect furniture from damage.
A control dial allows selection of the type of cleaning best suited to the
environment being cleaned. Together with a variety of attachments, this cleaner
provides the versatility needed to efficiently clean all types of floors and surfaces.
Features
(located under exhaust air diffuser)
Sheath
Power
Nozzle
Electric Hose
Combination
dust brush/
upholstery tool
Filter bags
Crevice Tool
Sidekick
®
(Optional)
Steel wand
4
Wand and Hose Assembly
To install the power hose, align arrow (A) on hose with those on the
suction end of cleaner. Insert hose until it clicks. To remove, press release
tab (B) and pull hose out. Slip small accessories on end of wand or directly
on hose handle and twist slightly to secure.
CAUTION: Turn cleaner OFF before connecting or disconnecting wands and power nozzle.
To assemble wand, insert the lower wand, large end first, into sheath until latches engage (Fig. A). NOTE: Before assembling wand, check that the electric cord connector at end of sheath is properly positioned in its receptacle (Fig. B).
To connect hose handgrip to the sheath wand, align electrical connections on underside of sheath wand and hose
handgrip, and insert until latch clicks (Fig. C). To remove, press latch and pull wand out (Fig. D).
Crevice tool for
narrow spaces.
Shown for dusting. Reversed for fabrics.
(A) Alignment
Mark
(B) Release Tab
Fig. A
Fig. C
Fig. B
Fig. D
Loading...