ElectroHeat Furnblog X5 User Manual

Side 1 of 14

ElectroHeat Sweden AB Phone: [phone] VAT No: SE556101713701
Box 8065 Fax: [phone]
402 78 Göteborg Email: [e-mail] Internet: www.electroheat.se

Rev:0

Furnblog X5

ElectroHeat Control System

Side 2 of 14

ElectroHeat Sweden AB Phone: [phone] VAT No: SE556101713701
Box 8065 Fax: [phone]
402 78 Göteborg Email: [e-mail] Internet: www.electroheat.se

Rev:0

Table of Contents

1. Start of Control System ....................................................................................................................... 3

2. Program ............................................................................................................................................... 4

2.1 Create a heating program ........................................................................................................... 4

2.2 Save Program File ..................................................................................................................... 7

2.3 Manage Program File ................................................................................................................ 8

2.4 Start and stop ............................................................................................................................. 8

3. Trend ................................................................................................................................................. 11

4. Alarm ................................................................................................................................................. 11

5. Log file .............................................................................................................................................. 12

6. Keyboard ........................................................................................................................................... 13

7. Setup .................................................................................................................................................. 13

Side 3 of 14

ElectroHeat Sweden AB Phone: [phone] VAT No: SE556101713701
Box 8065 Fax: [phone]
402 78 Göteborg Email: [e-mail] Internet: www.electroheat.se

Rev:0

1. Start of Control System

When starting the control system for the furnace the emergency stop circuit has to be reset
manually. The alarm list will start flashing and when pressing the alarm button following message will
appear “Confirm that the equipment is ready to start by reset the alarm list”. To reset the alarm list
press the button “Clear alarm list and reset alarms”.

Alarm at start

Alarm list

Alarm starts flashing

Button to clear alarm list

Side 4 of 14

ElectroHeat Sweden AB Phone: [phone] VAT No: SE556101713701
Box 8065 Fax: [phone]
402 78 Göteborg Email: [e-mail] Internet: www.electroheat.se

Rev:0

2. Program

2.1 Create a heating program

From the start window you can create a heating program for the furnace directly. The heating
program consists of different segments. To add the first segment click on the Segment box 1 where it
says; “Click here to add a segment”.

Add segment

Different segments can be chosen:

Wait to start: Type in when program should start. Enter 60 minutes if program should start in an
hour and enter 0 minutes if program should start directly etc.

Unrestricted: The heating will be made with full power up to typed temperature thereafter heating
rate typed in “ Ramp Up” will be used.

Ramp Up: Desired heating rate and dwell temperature is typed in. The temperature rate will be held
until the dwell temperature is achieved.

Dwell: The desired dwell time is typed in.

Manual Dwell: When the dwell temperature is achieved following text message appears for the

channel “Manual Dwell Press here to continue”. When pressing this message the cycle jumps out of
dwell segment and continues to the next segment.

Ramp Down: When cooling with certain rate is required, desired value is typed in here.

Program Down: When temperature in “Program done” has been achieved the program will end and

stop logging temperature.

Side 5 of 14

ElectroHeat Sweden AB Phone: [phone] VAT No: SE556101713701
Box 8065 Fax: [phone]
402 78 Göteborg Email: [e-mail] Internet: www.electroheat.se

Rev:0

Select a segment type, enter the desired values and press the right button “Add segment”.

Select Segment Type

To add the second segment click on the Segment box 2 and choose a segment type for this segment.

Segment 2