ElectroFlip iConserve User Manual
iConserve User Guide___________________________________________________
Introduction………………………………………………………………………………………
2
Features………………………………………………………………………………………….
2
Overview………………………………………………………………………………………….
2
Display unit…………………………………………………………………………………...
2
Transmitter and sensor……………………………………………………………………..
2
Display information………………………………………………………………………….
3
Installation………………………………………………………………………………………..
3
Find power cable…………………………………………………………………………….
4
Replacing batteries………………………………………………………………………...
4
Link transmitter and display unit………………………………………………………….
4
Operating Guide……………………………………………………………………..................
4
Setting time and date……………………………………………………………………...
4
Advanced settings……………………………………………………………………...........
5
View instant and accumulative energy, cost, Co2……………………………………….
6
How to view historical data and charts…………………………………………………….
7
Switch alarm on or off…………………………………………………………………........
8
Must Read Warnings……..……………………….…………………………………………......
9
iConserve
User Guide
All information and instructions included in this manual are current as of March 22, 2014.
However, due to the fluid nature of advancing technology, some characteristics may change or
need modifications in the future. Should you encounter any problems or have any further
questions about your purchase, please visit us at
WARNING!: Before attempting to install the transmitter and clamp sensor in your breaker
box or power source for your home or business FIRST consult with a local Certified
Electrician. In addition it’s highly recommended that you hire this Certified Electrician to
safely and properly install these components. Inappropriate contact with your breaker
box or main power source can be FATAL.
Table of Contents
www.ElectroFlip.com and visit the contact us
page.
1
Loading...