Electrocube 230 SERIES Catalog Page

METALLIZED POLYESTER CAPACITORS

®

230 SERIES

The unique high performance and
long life characteristics of polyester
account for the varied applications of
this miniature capacitor series. A wide
range of sizes and configurations are
available. You can choose from axial­lead wrap and fill, oval and round
shapes and rectangular epoxy case
with axial and radial leads.

These capacitors feature extended
foil construction and standard tin­coated copper-clad steel leads. Nickel,
copper, dumet and other special

leads are available.

Protective clear wrap is offered on
all wrap and fill units. Please add
.010” to maximum T and W dimen­sion for protective clear wrap.

The potting material and endfills
of Electrocube’s capacitors meet or
exceed the flammability requirements
of UL94VO.

Dimensional variations for all
MFD values are available with the
same volume to meet your design
requirements.

SPECIFICATIONS

Temperature: -55°C to +85°C at rated voltage; to +125°C

with 50% voltage derating.

Dielectric Strength: Will withstand 150% at rated voltage

and 25°C for a period not to exceed 1 minute; current limited
to 5 mA.

Life Test: Will withstand rated voltage for 250 hrs. at +125°C

with not more than 1 failure in 12 permitted.

Dissipation Factor: Shall not exceed 1.0% at 25°C.
Dielectric Absorption: Shall not exceed 0.5% at 25°C per

MIL-C-19978.

Acceptance Criteria: Measurement frequency for capacitance

and dissipation factor shall be 1000 Hz for values up to 1 mfd
and 120 Hz for values of 1.0 mfd and up.

Insulation Resistance: At rated voltage or 500V, whichever

is less, units shall meet the minimum values below:

TYPICAL DIELECTRIC CHARACTERISTIC CURVES

ANCE CHANGE

% CAPACIT

NOTES:

For information regarding insulating sleeves, mountings, special terminals,
non-standard leads, circuit connections and other hardware, please
consult factory.

For styles and ratings not shown, or for unusual requirements necessitated
by special circuit applications (including higher IR or lower DF), consult
the factory direct.

All Electrocube film capacitors have endfills and tape that

meet or exceed the flammability requirements of UL94V0.

1307 S. Myrtle Ave. • Monrovia, CA 91016 • TEL: [phone] • FAX: [phone]

®

e-mail: [e-mail] • Internet: www.electrocube.com • (IR: 9/99)

% DISSIPATION FACTOR

ARADS)

INSULATION RESISTANCE

(MEGOHMS TIMES MICROF

METALLIZED POLYESTER CAPACITORS

®

SERIES NO. DESCRIPTION

230 SERIES

230B

230C

230D

FLAME RETARDANT
WRAP AND FILL, OVAL

FLAME RETARDANT
WRAP AND FILL, FLAT

FLAME RETARDANT
WRAP AND FILL, ROUND

FLAME RETARDANT

231A

EPOXY CASE,
RECTANGULAR
AXIAL LEADS

FLAME RETARDANT

232A

EPOXY CASE,
RECTANGULAR
RADIAL LEADS

1307 S. Myrtle Ave. • Monrovia, CA 91016 • TEL: [phone] • FAX: [phone]

®

e-mail: [e-mail] • Internet: www.electrocube.com • (IR: 9/99)

METALLIZED POLYESTER

®

230B SERIES

WRAP AND FILL

OVAL CONFIGURATION

For max. T, W and L dimensions, allow +.050”.

LEAD LENGTH: 2.0” ± .50”

35 VOLT DC 100 VOLT DC 200 VOLT DC

DIMENSIONS

MFD PART NO. T W L

.0010 230B1Z102* .09 .18 .40 26 230B1B102* .09 .18 .40 26 230B1C102* .09 .18 .40 26
.0012 230B1Z122* .09 .18 .40 26 230B1B122* .09 .18 .40 26 230B1C122* .09 .18 .40 26
.0015 230B1Z152* .09 .18 .40 26 230B1B152* .09 .18 .40 26 230B1C152* .09 .18 .40 26
.0018 230B1Z182* .09 .18 .40 26 230B1B182* .09 .18 .40 26 230B1C182* .09 .18 .40 26
.0022 230B1Z222* .09 .18 .40 26 230B1B222* .09 .18 .40 26 230B1C222* .09 .18 .40 26
.0027 230B1Z272* .09 .18 .40 26 230B1B272* .09 .18 .40 26 230B1C272* .09 .18 .40 26
.0033 230B1Z332* .09 .18 .40 26 230B1B332* .09 .18 .40 26 230B1C332* .09 .18 .40 26
.0039 230B1Z392* .09 .18 .40 26 230B1B392* .09 .18 .40 26 230B1C392* .09 .18 .40 26
.0047 230B1Z472* .09 .18 .40 26 230B1B472* .09 .18 .40 26 230B1C472* .09 .18 .40 26
.0056 230B1Z562* .09 .18 .40 26 230B1B562* .09 .18 .40 26 230B1C562* .09 .18 .40 26
.0068 230B1Z682* .09 .18 .40 26 230B1B682* .09 .18 .40 26 230B1C682* .09 .18 .40 26
.0082 230B1Z822* .09 .18 .40 26 230B1B822* .09 .18 .40 26 230B1C822* .09 .18 .40 26
.010 230B1Z103* .09 .18 .40 26 230B1B103* .09 .18 .40 26 230B1C103* .09 .18 .40 26
.012 230B1Z123* .09 .18 .40 26 230B1B123* .09 .18 .40 26 230B1C123* .09 .18 .40 26
.015 230B1Z153* .09 .18 .40 26 230B1B153* .09 .18 .40 26 230B1C153* .09 .18 .40 26
.018 230B1Z183* .09 .18 .40 26 230B1B183* .09 .18 .40 26 230B1C183* .10 .20 .40 26
.022 230B1Z223* .09 .18 .40 26 230B1B223* .09 .18 .40 26 230B1C223* .09 .18 .53 26
.027 230B1Z273* .09 .18 .40 26 230B1B273* .09 .18 .40 26 230B1C273* .09 .18 .53 26
.033 230B1Z333* .09 .18 .40 26 230B1B333* .09 .18 .40 26 230B1C333* .09 .18 .53 26
.039 230B1Z393* .09 .18 .40 26 230B1B393* .09 .18 .40 26 230B1C393* .09 .18 .53 26
.047 230B1Z473* .09 .18 .40 26 230B1B473* .09 .18 .40 26 230B1C473* .09 .18 .53 26
.056 230B1Z563* .09 .18 .40 26 230B1B563* .09 .18 .40 26 230B1C563* .11 .20 .53 26
.068 230B1Z683* .09 .18 .40 26 230B1B683* .10 .19 .40 26 230B1C683* .12 .22 .53 24
.082 230B1Z823* .09 .18 .40 26 230B1B823* .11 .20 .40 26 230B1C823* .14 .23 .53 24
.10 230B1Z104* .09 .18 .40 26 230B1B104* .09 .18 .53 26 230B1C104* .16 .25 .53 24
.12 230B1Z124* .09 .18 .40 26 230B1B124* .09 .18 .53 26 230B1C124* .17 .27 .53 24
.15 230B1Z154* .09 .18 .40 26 230B1B154* .09 .18 .53 26 230B1C154* .20 .29 .53 24
.18 230B1Z184* .10 .20 .40 26 230B1B184* .09 .18 .53 26 230B1C184* .22 .32 .53 24
.22 230B1Z224* .11 .22 .40 26 230B1B224* .10 .20 .53 26 230B1C224* .18 .28 .65 24
.27 230B1Z274* .13 .22 .40 26 230B1B274* .12 .22 .53 24 230B1C274* .20 .29 .65 24
.33 230B1Z334* .15 .24 .40 26 230B1B334* .14 .23 .53 24 230B1C334* .24 .33 .65 24
.39 230B1Z394* .16 .25 .40 26 230B1B394* .15 .25 .53 24 230B1C394* .21 .30 .78 24
.47 230B1Z474* .18 .28 .40 26 230B1B474* .17 .27 .53 24 230B1C474* .24 .33 .78 24
.56 230B1Z564* .12 .22 .53 26 230B1B564* .19 .28 .53 24 230B1C564* .26 .36 .78 24
.68 230B1Z684* .13 .23 .53 24 230B1B684* .22 .31 .53 24 230B1C684* .29 .39 .78 24
.82 230B1Z824* .15 .24 .53 24 230B1B824* .18 .27 .65 24 230B1C824* .33 .42 .78 22

1.0 230B1Z105* .17 .26 .53 24 230B1B105* .20 .29 .65 24 230B1C105* .32 .41 .90 22

1.2 230B1Z125* .19 .28 .53 24 230B1B125* .22 .32 .65 24 230B1C125* .25 .42 1.15 22

1.5 230B1Z155* .22 .31 .53 24 230B1B155* .21 .30 .78 24 230B1C155* .29 .45 1.15 22

1.8 230B1Z185* .25 .34 .53 24 230B1B185* .24 .36 .78 24 230B1C185* .32 .49 1.15 22

2.0 230B1Z205* .26 .35 .53 24 230B1B205* .28 .37 .78 24 230B1C205* .38 .52 1.15 20

3.0 230B1Z305* .25 .35 .65 24 230B1B305* .34 .44 .78 22 230B1C305* .44 .61 1.15 20

4.0 230B1Z405* .25 .35 .78 24 230B1B405* .32 .46 .90 22 230B1C405* .46 .63 1.40 20

5.0 230B1Z505* .28 .38 .78 24 230B1B505* .28 .44 1.15 22 230B1C505* .45 .61 1.65 20

6.0 230B1Z605* .31 .42 .78 24 230B1B605* .33 .49 1.15 22 230B1C605* .52 .69 1.65 20

8.0 230B1Z805* .32 .42 .90 22 230B1B805* .35 .51 1.15 20 230B1C805* .53 .70 1.90 20

10.0 230B1Z106* .37 .46 .90 22 230B1B106* .46 .63 1.15 20 230B1C106* .66 .82 1.90 20

12.0 230B1Z126* .30 .48 1.15 22 230B1B126* .51 .68 1.15 20 230B1C126* .78 .95 1.90 20

15.0 230B1Z156* .35 .51 1.15 22 230B1B156* .50 .67 1.40 20 230B1C156* .82 .99 1.90 20

18.0 230B1Z186* .38 .55 1.15 22 230B1B186* .56 .72 1.40 20 230B1C186* .85 1.11 1.90 20

20.0 230B1Z206* .41 .57 1.15 22 230B1B206* .52 .68 1.65 20 230B1C206* 1.00 1.13 1.90 20

30.0 230B1Z306* .52 .69 1.15 20 230B1B306* .59 .75 1.90 20 230B1C306 1.10 1.30 2.15 20

40.0 230B1Z406* .61 .78 1.15 20 230B1B406* .72 .88 1.90 20 230B1C406 1.10 1.30 2.75 20

50.0 230B1Z506* .60 .77 1.40 20 230B1B506* .79 .95 1.90 20 230B1C506 1.25 1.45 2.75 20

75.0 230B1Z756* .67 .84 1.65 20 230B1B756* .96 1.13 1.90 18 230B1C756 1.49 1.79 2.75 18

100.0 230B1Z1006* .65 .83 2.21 18 230B1B1006* 1.10 1.30 1.90 18 230B1C1006 1.70 2.08 2.75 18

*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%

LEAD

SIZE SIZE SIZE

(AWG)

PART NO. T W L

DIMENSIONS

LEAD

(AWG)

PART NO. T W L

DIMENSIONS

LEAD

(AWG)

1307 S. Myrtle Ave. • Monrovia, CA 91016 • TEL: [phone] • FAX: [phone]

®

e-mail: [e-mail] • Internet: www.electrocube.com • (A: 04/01)

METALLIZED POLYESTER

®

230B SERIES

WRAP AND FILL

OVAL CONFIGURATION

For max. T, W and L dimensions, allow +.050”.

LEAD LENGTH: 2.0” ± .50”

400 VOLT DC 600 VOLT DC 1000 VOLT DC

DIMENSIONS

MFD PART NO. T W L

.0010 230B1E102* .09 .18 .40 26 230B1F102* .09 .18 .40 26 230B1G102* - - - ­.0012 230B1E122* .09 .18 .40 26 230B1F122* .09 .18 .40 26 230B1G122* - - - -
.0015 230B1E152* .09 .18 .40 26 230B1F152* .09 .18 .40 26 230B1G152* - - - -
.0018 230B1E182* .09 .18 .40 26 230B1F182* .09 .18 .40 26 230B1G182* - - - -
.0022 230B1E222* .09 .18 .40 26 230B1F222* .09 .18 .40 26 230B1G222* - - - -
.0027 230B1E272* .09 .18 .40 26 230B1F272* .10 .19 .40 26 230B1G272* - - - -
.0033 230B1E332* .09 .18 .40 26 230B1F332* .09 .18 .53 26 230B1G332* - - - -
.0039 230B1E392* .09 .18 .40 26 230B1F392* .09 .18 .53 26 230B1G392* - - - -
.0047 230B1E472* .09 .18 .40 26 230B1F472* .09 .18 .53 26 230B1G472* - - - -
.0056 230B1E562* .10 .20 .40 26 230B1F562* .09 .18 .53 26 230B1G562* - - - -
.0068 230B1E682* .11 .21 .40 26 230B1F682* .11 .20 .53 26 230B1G682* - - - -
.0082 230B1E822* .09 .18 .53 26 230B1F822* .12 .22 .53 24 230B1G822* - - - -
.010 230B1E103* .09 .18 .53 26 230B1F103* .14 .23 .53 24 230B1G103* - - - -
.012 230B1E123* .09 .18 .53 26 230B1F123* .15 .25 .53 24 230B1G123* - - - -
.015 230B1E153* .09 .18 .53 26 230B1F153* .18 .27 .53 24 230B1G153* - - - -
.018 230B1E183* .11 .20 .53 26 230B1F183* .20 .29 .53 24 230B1G183* - - - -
.022 230B1E223* .12 .22 .53 24 230B1F223* .22 .32 .53 24 230B1G223* - - - -
.027 230B1E273* .14 .23 .53 24 230B1F273* .20 .29 .68 24 230B1G273* - - - -
.033 230B1E333* .16 .25 .53 24 230B1F333* .22 .31 .68 24 230B1G333* - - - -
.039 230B1E393* .17 .27 .53 24 230B1F393* .20 .30 .78 24 230B1G393* - - - -
.047 230B1E473* .19 .29 .53 24 230B1F473* .25 .32 .78 24 230B1G473* - - - -
.056 230B1E563* .22 .31 .53 24 230B1F563* .25 .34 .78 24 230B1G563* - - - -
.068 230B1E683* .18 .27 .65 24 230B1F683* .28 .37 .78 24 230B1G683* - - - -
.082 230B1E823* .20 .29 .65 24 230B1F823* .31 .41 .78 22 230B1G823* - - - -
.10 230B1E104* .22 .32 .65 24 230B1F104* .31 .40 .95 22 230B1G104* - - - -
.12 230B1E124* .20 .30 .78 24 230B1F124* .24 .41 1.21 22 230B1G124* - - - -
.15 230B1E154* .23 .33 .78 24 230B1F154* .28 .44 1.21 22 230B1G154* - - - -
.18 230B1E184* .26 .34 .78 24 230B1F184* .31 .48 1.21 22 230B1G184* - - - -
.22 230B1E224* .29 .39 .78 24 230B1F224* .35 .52 1.21 20 230B1G224* - - - -
.27 230B1E274* .33 .42 .78 22 230B1F274* .40 .57 1.21 20 230B1G274* - - - -
.33 230B1E334* .32 .41 .90 22 230B1F334* .45 .61 1.21 20 230B1G334* - - - -
.39 230B1E394* .25 .42 1.15 22 230B1F394* .43 .59 1.45 20 230B1G394* - - - -
.47 230B1E474* .28 .45 1.15 22 230B1F474* .48 .65 1.45 20 230B1G474* - - - -
.56 230B1E564* .31 .48 1.15 22 230B1F564* .47 .63 1.70 20 230B1G564* - - - -
.68 230B1E684* .35 .52 1.15 20 230B1F684* .47 .64 1.90 20 230B1G684* - - - -
.82 230B1E824* .39 .56 1.15 20 230B1F824* .53 .70 1.90 20 230B1G824* - - - -

1.0 230B1E105* .44 .61 1.15 20 230B1F105* .59 .76 1.90 20 230B1G105* - - - -

1.2 230B1E125* .42 .59 1.40 20 230B1F125* .66 .82 1.90 20 230B1G125* - - - -

1.5 230B1E155* .48 .65 1.40 20 230B1F155* .75 .91 1.90 20 230B1G155* - - - -

1.8 230B1E185* .47 .64 1.65 20 230B1F185* .79 .96 1.90 20 230B1G185* - - - -

2.0 230B1E205* .45 .62 1.90 20 230B1F205* .88 1.05 1.90 20 230B1G205* - - - -

3.0 230B1E305* .57 .74 1.90 20 230B1F305* .99 1.15 2.21 20 230B1G305* - - - -

4.0 230B1E405* .68 .84 1.90 20 230B1F405* 1.15 1.32 2.21 20 230B1G405* - - - -

5.0 230B1E505* .77 .93 1.90 20 230B1F505* 1.25 1.43 2.21 20 230B1G505* - - - -

6.0 230B1E605* .83 .99 1.90 20 230B1F605* 1.42 1.60 2.21 20 230B1G605* - - - -

8.0 230B1E805* 1.02 1.19 1.90 20 230B1F805* 1.64 1.80 2.21 20 230B1G805* - - - -

10.0 230B1E106* 1.09 1.26 1.90 20 230B1F106* 1.74 2.13 2.21 20 230B1G106* - - - -

12.0 230B1E126* 1.20 1.37 1.90 20 230B1F126* - - - - 230B1G126* - - - -

15.0 230B1E156* 1.21 1.40 2.21 20 230B1F156* - - - - 230B1G156* - - - -

18.0 230B1E186* 1.38 1.54 2.21 20 230B1F186* - - - - 230B1G186* - - - -

20.0 230B1E206* 1.45 1.65 2.21 20 230B1F206* - - - - 230B1G206* - - - -

30.0 230B1E306* - - - - 230B1F306* - - - - 230B1G306* - - - -

40.0 230B1E406* - - - - 230B1F406* - - - - 230B1G406* - - - -

50.0 230B1E506* - - - - 230B1F506* - - - - 230B1G506* - - - -

75.0 230B1E756* - - - - 230B1F756* - - - - 230B1G756* - - - -

100.0 230B1E1006* - - - - 230B1F1006* - - - - 230B1G1006* - - - -

*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%

LEAD

SIZE SIZE SIZE

(AWG)

PART NO. T W L

DIMENSIONS

LEAD

(AWG)

PART NO. T W L

DIMENSIONS

PLEASE CONSULT FACTORY

LEAD

(AWG)

1307 S. Myrtle Ave. • Monrovia, CA 91016 • TEL: [phone] • FAX: [phone]

®

e-mail: [e-mail] • Internet: www.electrocube.com • (A: 07/03)