HOW TO SET THE MICROWAVE CONTROLS
SETTING CLOCK
When the microwave oven is plugged in, the
screen will display "0:00" and the buzzer will ring
once.
1. Press “CLOCK/KITCHEN TIMER” once and
“00:00” will display.
2. Turn the dial to adjust the hour figures, the
input time should be within 0-23(24-hour).
3. Press “CLOCK/KITCHEN TIMER”, and the
minute figures will flash.
4. Turn the dial to adjust the minute figures, the
input time should be within 0-59.
5. Press “CLOCK/KITCHEN TIMER” to finish
clock setting. “.” Will flash.
Note: 1) If the clock is not set, it will not function
when powered.
2) During the process of clock setting, if you press
“STOP/CLEAR”, the oven will go back to the
previous status automatically.
KITCHEN TIMER
1. Press “CLOCK/KITCHEN TIMER” twice and
the LED will display 00:00.
2. Turn the dial to enter the correct timer. (The
maximum cooking time is 95 minutes).
3. Press “START/+30SEC./CONFIRM” to
confirm setting.
4. When the kitchen time is reached, the buzzer
will ring 5 times.
If the clock has been set (24-hour system), the
LED will display the current time.
Note: The kitchen Time is different from the
24-hour system, the Kitchen timer is a different
timer.
MICROWAVE COOKING
Press “MICROWAVE” and the LED will display
“P100”. Press “MICROWAVE” or turn
the dial to choose the power you want, and
“P100”, “P80”, “P50”, “P30” or “P10” will display
for each added press. Then press
“START/+30SEC./CONFIRM” to confirm and turn
the dial to set the cooking time from 0:05 to 95:00.
Press “START/+30SEC./CONFIRM” again to start
cooking.
Example: If you want to use 80% microwave
power to cook for 20 minutes, you can operate
the oven as follows:
1. Press “MICROWAVE” once and the screen
will display “P100”.
2. Press “MICROWAVE” once again or turn the
dial to choose 80% microwave power.
3. Press “START/+30SEC./CONFIRM” to
confirm and the screen will display “P80”
4. Turn the dial to adjust the cooking time until
the oven displays “20:00”.
5. Press “START/+30SEC./CONFIRM” to start
cooking.
Note: The step quantities for the adjustment time
of the coding switch are as follows:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
“MICROWAVE” Pad instructions: