32 inch HD LED TV
EIQ-32HDT2
CONTENTS
Safety Information……………………………………………………………… 2
What is included…..……………………………………………………………. 4
TV Stand Installation/Removal……………………………………………. 5
Getting Started…………………………………………………………………… 6
Connecting to External Devices…………………………………………… 8
Remote Control………………………………………………………………….. 9
Settings………………………………………………………………………………11
Specifications……………………………………………………………………..23
Support & Disposal…………………………………………………………….24
1
SAFETY INFORMATION
• Read these instructions – All the safety and operating instructions should be read
before this product is operated.
• Keep these instructions – The safety and operating instructions should be
retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating
instructions should be adhered to.
• Follow all instructions – All operating and usage instructions should be followed.
• Do not use this equipment near water – The appliance should not be used near
water or moisture e.g. in a wet basement or near a swimming pool.
• Clean only with a dry cloth. Do not use solvents or petroleum based fluids.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, stoves or other apparatus
(including amplifiers) that produce heat.
• Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
• Protect the power cord from being walked on or pinched, particularly at the plug
and at the point where they exit from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used, use
caution when moving it to avoid any injuries or damage from it tipping over.
• Unplug the apparatus during lightning storms or when unused for long periods of
time.
• Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus or it
has been exposed to rain or moisture, it does not operate normally or has been
dropped.
• Please keep the unit in a well-ventilated environment.
• The TV set should only be connected to a mains power supply with 220-240V
50Hz
• To prevent overload, do not share the same power supply socket with too many
other electronic components.
• Do not place any connecting wires where they may be stepped on or tripped
over.
• Do not place heavy items on the cable as this may cause damage.
• Hold the main plug, not the wires, when removing from a socket.
2
• Pull the plug out immediately and seek professional help if the main plug or cable
is damaged, liquid has spilt onto the set, if accidentally exposed to water or
moisture, if anything accidentally penetrates the ventilation slots or if the set
does not work normally.
• Do not remove the safety covers. There are no user serviceable parts inside.
Trying to service the unit yourself is dangerous and may invalidate the product’s
warranty. Only qualified personnel should service this apparatus.
• To avoid battery leakage, remove exhausted batteries from the remote control
when not in use for a long period.
• Do not block ventilation slots on the back cover. The TV can be placed in a
cabinet but ensure at least 5cm (2”) clearance all around.
• Do not tap or shake the TV screen, this may damage internal components.
• WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and objects filled with liquids, such as vases, shall not be placed on the
apparatus.
• WARNING: The wall plug socket is used as a disconnection device and should
remain readily accessible.
• WARNING: The batteries shall not be exposed to excessive heat such as direct
sunlight or fire.
This warning sign is to
warn of dangerous voltage
inside the product.
CAUTION: To reduce the risk of
electric shock, DO NOT remove the
cover (or back). No user serviceable
parts inside. Refer servicing to
qualified service personnel.
This warning sign is to alert
you of important
instructions accompanying
the product.
This equipment is a Class II or double insulated electrical appliance.
It does not require a grounded connection.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE
USER’S HEARING.
3
WHAT IS INCLUDED
TV Set Remote Control (2xAAA batteries)
4
TV STAND INSTALLATION/REMOVAL
WALL MOUNTING
• The TV is provided with mounting holes for a VESA approved wall mounting
bracket (not supplied)
• The VESA mounting pattern is 200x100mm and the size of the screws is 4 x
M6 x 12 (not supplied)
• Do not use screws longer than 12mm or damage will occur to the internal
components.
NOTE: As the TV set is considered heavy, please consult with a professional
wall mount installer to perform the installation.
5
GETTING STARTED
BUTTON FUNCTIONS
1. POWER BUTON: To turn ON/OFF the TV
2. SOURCE Button: To select the input
source.
3. MENU Button: To enter menu setting
page.
4. VOL-: To decrease the volume level.
5. VOL+: To increase the volume level
6. CH-: To select previous channel
7. CH+: To select next channel
8. Remote Control Sensor
9. Power Indicator: In standby mode the
indicator light will display red, when switching on the unit the indicator
light will display green.
6
INPUT / OUTPUT TERMINALS
1. Headphones
2. AV input terminal
3. YPbPr: Connect to the YPbPr video output terminal of the DVD player
4. USB
5. RF: Antenna connection
6. Coaxial output terminal
7. HDMI x3
8. Scart input terminal
9. PC Audio: connect it to the audio output terminal of the PC
10. VGA: PC Video input
7
CONNECTING TO EXTERNAL DEVICES
8
REMOVE CONTROL
1. POWER: Turn on the TV/Standby
2. MUTE: Mute or restore the sound
3. SOURCE: Press to change the signal source
4. S. MODE: Setting audio options
5. P. MODE: Output image mode selection
6. AUDIO: Switch the audio channel when DVD or
multimedia playing. I/II: In the TV mode, press this
button to select the stereo size
7. P. SIZE: Press to select the different picture size.
8. NUMBER KEYS: Change the channel
9. FAV. CH: Show the list of favourite channels
10. SLEEP: Auto Power Off Timer
11. JUMP: Return to the previous channel tuned
12. MENU: Show Menu
13. EXIT: Exit the Menu
14. INFO: Show information about the current program
15. NAVIGATION KEYS (Up, Down, Left, Right and OK): To
move in the menus and confirm settings.
16. V+ / V-: Increase / decrease volume
17. P+ / P-: Next / previous channel
18. REPEAT: Repeat mode
19. D.SETUP (disabled, used for DVD combo model)
20. ZOOM: Zoom in/out the display frame
21. GOTO: Play from the desired location
Press the appropriate colour to direct
access functions in TELETEXT or EPG OSD
mode
22. TIME SHIFT: In DTV mode, press TIME SHIFT button to start the delay
function, press the button to start playing delay program, press the
button to terminate the delay function
Reveals hidden information such as the answers to a quiz in TELETEXT
Mode
23. PVR LIST: IN DTV mode, displays the executed PVR LIST.
Displays the main index in TELETEXT mode.
24. USB: Press to switch to USB signal source directly.
9
Displays the top, bottom or all of the page.
25. DTV/RADIO: In DTV mode, press DTV/RADIO button to enter DTV or RADIO
mode.
Freeze a multi-page selection on TELETEXT mode.
26. Stop Playback
27. REC: In DTV mode, press REC button to start recording, press button
stop recording.
28. Eject disc
29. Play/Pause.
30. Fast Forward playback
31. Rewind playback
32. Previous file or chapter
33. Next file or chapter
34. TEXT: Turn on and off the Teletext function
35. D.MENU (disabled, used for DVD combo model)
36. SUBTITLE: Select subtitle of media video file (requires the support of disk or
file)
37. GUIDE: Show the Electronic Program Guide (EPG)
BATTERY INSTALLATION
1. Open the battery cover.
2. Insert 2 AAA batteries in the battery compartment, matching the polarities
correctly.
3. Replace the battery cover.
10
SETTINGS
INITIAL SETUP
1. Connect the TV set to a power outlet.
2. Press the POWER button on the remote or on the TV set to turn on the TV
(the indicator will be lit green)
NOTE: Pressing the power button on the remote or TV set will place the TV
into standby mode only. If the TV set is expected to be not in use for a long
period of time, please disconnect it from the power source.
3. Press the to choose the preferred item and press OK
button to confirm the settings.
UK
11
SELECT INPUT SOURCE
Available options: DTV, ATV, AV, SCART, YPbPr, HDMI 1, HDMI 2, HDMI
3, PC, MEDIA
-
Press SOURCE button to display the input source list.
-
Press
▲ ▼
/ or SOURCE button to select the preferred input
source.
-
Press OK button to confirm.
-
Press EXIT button to exit.
BASIC OPERATIONS
1. Press the MENU button on the remote
control or on the TV to enter the menu
page.
Use / buttons to select the main menu
options.
2. Use
▲ ▼
/ buttons to navigate up and
down within the menu.
Use the / buttons to alter the required
setting then press the MENU button to confirm and return to the previous
menu page or press EXIT button to exit the menu.
PICTURE MENU
Press MENU button to enter the main menu.
12
After the preferred settings are done, press MENU button to confirm and
return to the previous menu page or press EXIT button to exit the menu.
SOUND MENU
Press MENU button to enter the main menu
After the preferred settings are done, press MENU button to confirm and
return to the previous menu page or press EXIT button to exit the menu.
CHANNEL MENU
Press MENU button to enter the main menu.
Press / button to select Channel in the main menu and press OK then ▼
to enter.
13
1. Press
▲ ▼
/ button to select the option that you want to select the
preferred item.
2. Press OK button to enter sub-menu
3. Press MENU button to return back to previous menu or press EXIT button
to exit the menu
TUNER TYPE
Press
▲ ▼
/ button to select tuner type, then press / button to select the
type of antenna, either Antenna or Cable.
Tuner type is Antenna Tuner type is Cable
AUTO SCAN
Press
▲ ▼
/ to select Auto Scan then press OK, then button to enter sub-
menu.
Country
Press / button to select country.
Mode
Press / button to select Mode: DTV+ATV, DTV, ATV.
Scan Type
Press / button to select Scan Type: Advanced, Quick, Full.
Network ID
Press / button to select Network ID: Auto or enter digital numbers.
Frequency
Press / button to select Frequency: Auto or enter digital numbers.
14
Symbol Rate
Press / button to select Symbol Rate: Auto or digital numbers.
Start
Press OK / button to start the auto searching. It will search digital channels
first, then analogue channels.
Before executing auto channel search please make sure the preferred tuner
type is chosen. Wrongly setting the tuner type may cause failure to find
channels.
MANUAL SCAN
Search for the channels manually.
Press
▲ ▼
/ button to select Digital or Analog
Manual Scan then press OK / button to enter
sub-menu.
Tuner type is Antenna Tuner type is Cable
Network ID
Press / button to select Network ID: Auto or enter digital numbers.
Frequency
Press / button to select Frequency: Auto or enter digital numbers.
Symbol Rate
Press / button to select Modulation: Auto, 16QAM, 32QAM, 64QAM,
128QAM, 256QAM.
15
Start
Press OK / button to start the channel searching.
AUTO CHANNEL UPDATE
Press / button to select Auto Channel Update then press OK / button to
select On or Off.
CHANNEL EDIT
Press / button to select Auto Channel Update then press OK / button to
enter sub-menu.
RED button: Delete
GREEN button: Skip
Blue button: Press this button to set the selected channel you want to
move. Press
and press this button again to confirm.
After the setting is done, press MENU button to return to the previous menu
page or press EXIT button to exit the menu.
NOTE: Press the CH+/- to view the channels.
▲ ▼
/ to move the selected channel to the preferred position
16
FAVOURITE MANAGER
Press
▲ ▼
/ button to highlight the channel you would like to set as favourite
channel. Press the RED button to set it in favourite group 1. Press the GREEN
button to set it in favourite group 2. Press the YELLOW button to set it in
favourite group 3. Press the BLUE button to set it in favourite group 4.
NOTE: Pressing the FAV button on the remote control will display the Favourite
List.
SIGNAL INFORMATION (Only available in DTV mode)
Press MENU button to enter main menu and select “Signal Information”.
17
LOCK SYSTEM MENU
Press MENU button to enter the main menu and select “Lock System”
The lock system enables you to put a password on the TV set. The default
password is 0000. To make changes, enter the password and use the
▲ ▼
navigate to the required setting. Press the / to make the required
changes then press the MENU button to return or EXIT to exit.
SETUP MENU
Press MENU button to enter the main menu and select “Setup”.
/ to
To make changes use the
▲ ▼
/ to navigate to the required setting. Press the
/ to make the required changes then press the MENU button to return or
EXIT to exit.
First Time Setup
Press
▲ ▼
/ button to select First Time setup and press OK button to enter.
Audio Languages
Set the Primary and Secondary preferred audio languages.
18
Subtitle
Select the preferred default subtitle languages.
Teletext
Set the preferred default Teletext language.
Blue Screen
Turn On or Off the Blue Screen.
Mode Setting
Select Home Mode for home use or Store Mode for display purposes.
Time Settings
OSD Timer – Set the time the OSD will show
after the last button press. Select Off, 10, 20,
30 or 60 seconds.
Sleep Timer – Set the time the TV will play for
before automatically going into standby. Select
Off, 5, 15, 30, 60, 90, 120 or 240 mins.
Auto Sleep – Set the time delay for the TV to turn off when idle. Select Off, 3,
4 or 5 hours.
Time Zone – Select the time zone you are in to set the clock.
Time – Set the time automatically with Auto Sync on or manually with it off.
NOTE: In the case of loss of power the clock setting will be lost.
GUIDE MENU (EPG)
Press the GUIDE button to
enter the TV guide menu.
Press the RED button to display the previous day’s guide
Press the GREEN button to display the next day’s guide
Press the YELLOW button to review the schedule set using BLUE button
Press the BLUE button to set a reminder for the highlighted program
19
PC SETUP MENU
Press the SOURCE button on the remote control and select PC.
Press the MENU button on the remote control to display the main menu.
Press
select the item that you would like to
adjust.
Press / to make changes to the
relevant setting.
Press the OK button on the remote
control to confirm the setting.
After finishing your adjustment, press MENU button to return to the previous
menu or press EXIT button to exit the menu.
▲ ▼
/ on the remote control to
20
USB OPERATION
Before the external USB device is connected to the TV please first press
SOURCE button and set the input source to MEDIA.
Insert USB device.
Press / button to select the item you require and press OK to enter.
Photo
Press
▲ ▼
/ button to select the file you wish to display then press OK button
to enter.
Press OK button to start a slideshow.
Press the / button to select the previous/next image.
Press EXIT to go back to the menu.
Music
Press the
▲ ▼
/ button to select the file you wish to play then press OK button
to enter.
Play or pause Rewind
Previous track Fast Forwards
Next track Stop
21
Press CH+/- to switch between Playlist and Play Screen
Press / to change page and press OK button to start playing
Press EXIT button to exit to previous menu.
Movie
Press
button to enter. Press
▲ ▼
/ button to select the file you would like to play then press OK
▲ ▼
/ button to select return option to go back to the
previous menu.
Play or pause Rewind
Previous file Fast Forwards
Next file Stop
Press EXIT button to exit to the previous page.
Text
Press
button to enter. Press
▲ ▼
/ button to select the file you would like to play then press OK
▲ ▼
/ button to select return option to go back to the
previous menu.
22
Press / to move to the previous/next page.
Use the number keys to jump to a specific page
Press EXIT to return to previous menu.
SPECIFICATIONS
TV System PAL DVB-T2
Maximum 1366x768
Brightness 240 CD/m2
Static Contrast 1400:1
Response Time 6.5ms
Consumption <65W
Power Supply AC100-240V – 50/60Hz
Connectivity Composite Video Input
Component Video Input
PC Video Input (VGA)
PC Audio Input
HDMI input x 3
RF Antenna Input
Headphones Output
Coaxial Output
Data Interface USB
Supported System Files FAT32 and FAT16
23
Multimedia Playback Format
Multimedia
File Extension
Categories
Video *.avi/MPEG(*.mpeg,*.dat,*vob) / MPEG-4(*.mp4) /
TS(*.ts,*.trp,*tp) / MKV(*.mkv) / *.flv / VC-1 /
WMV9(*.wmv,*.asf) / RMVB(*.rm,*.rmvb)
Music *.mp3/AAC(*.aac,*m4a)/*.wav
Photo *.jpg/*.jpeg
Text *.txt
Remote Control
Signal Type Infrared
Control Distance 8 meters
Control Angle 30o (Horizontal)
Power Supply AAA 1.5V x 2
PRODUCT DISPOSAL
Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled
separately as special treatment is necessary.
Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers
will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please
remember that this equipment will be further handled during the recycling process, so please be considerate when
depositing your equipment. Please contact the local council for details of your local household waste recycling centres.
24
TROUBLESHOTING
Problem
Solution
No power
Insert the power plug securely into the power outlet.
No picture
Ensure that the equipment is connected properly.
Distorted or no
sound
•
Remote control not working
•
Buttons on the TV don’t do
Disconnect the power plug and then reconnect it. (The unit may not
Poor picture or no picture
•
Noise or other interference
Electronic equipment near the unit may be causing interference.
Ensure the equipment is connected properly
• Ensure that the input setting for the TV and stereo system are
correct.
• Adjust the master volume to a suitable volume by pressing
V+/V- button.
• Check audio settings are correct.
• Check set isn’t muted.
• Unplug headphones
• Check the antenna connection.
Check the batteries are installed with the correct polarities.
• Replace the batteries with new, fully charged ones.
• Point directly at the remote sensor on the TV and try again.
• Operate at a distance of no more than 6m.
• Remove any obstacles between the remote control and the
sensor.
anything
be operating properly due to lightning, static, or other factors.)
Adjust the indoor aerial, use an amplified aerial or external
digital antenna.
• Have the DTV antenna checked or installed by a professional
installer
• Move anything that may cause interference.
• Retry Auto tuning the unit.
• Try another channel.
Relocate the unit or move the equipment.
electriQ UK SUPPORT
Complete online support form on www.electriQ.co.uk/support
Service Line: 0871 620 1057
Office hours: 9AM - 5PM Monday to Friday
www.electriQ.co.uk
Unit 2, The Nursery
Berristow Lane South Normanton
Derbyshire, DE55 2FX
25
Loading...