Compatibility
sheet:
PE - DENNNN032EN 05/19
M2
PERRY ELECTRIC Srl - Via milanese, 11 - 22070 VENIANO (Como) ITALY - www.perry.it
INSTALLATION INSTRUCTIONS
COMPATIBILITY TO THE MOST COMMON RESIDENTIAL SERIES PLATES
CONTENT OF PACKAGING
1 Electronic recessed device
1 T1 model sub-frame
2 screws for fastening the sub-frame to the type 503 wall-mounted recess box
1 Front + with WHITE POLISHED finishinghandle (only for thermostat)
1 Front + with ANTHRACITE finishinghandle (only for thermostat)
1 Front + with SILVER MATT finishinghandle (only for thermostat)
1 Set of reduced thickness ledges (only for BTICINO Matix series)
1 Frame (only for Axolute BTICINO series)
Use and installation instructions
Compatibility to the most common residential series plates
The trademarks:
Chiara ABB SpA
is property of
Ave sistema 44: personal 44, zama 44, vera 44 are property of AVE SpA
Axolute - Axolute air - Light - Light Tech - Living - LivingLight - LivingLight Air - Matix, BTICINO SpA
Chorus ONE/LUX/FLAT/GEO, GEWISS SpA
Arkè - Eikon - Eikon Evo - Plana, VIMAR SpA
are property of
are property of
SET-UP OF SUB-FRAME (T1) BASED ON THE PLATE USED
Sub-frame 1 (T1)
T1
T1
Sub-frame without any change
1
For plates
of the series:
VIMAR:
ARKÉ
EIKON
PLANA
PLANA SILVER
ABB:
CHIARA
are property of
Sub-frame 1 (T1)
T1
REMOVE
Important:
remove the 4 side supports
and the 4 hooks completely
all the way to their base
DEVICE CAN BE INSTALLED WITH PLATES
ABB:
AVE:
BTICINO:
GEWISS:
VIMAR:
T1
CHIARA
with dimensional adaptability kit (can be purchased separately)
SISTEMA AVE44:
Personal 44, Zama 44, Vera 44
AXOLUTE: white / anthracite / tech - MATIX
LIVING - LIGHT - LIGHT TECH
LIVINGLIGHT: anthracite / white / tech
with dimensional adaptability kit (can be purchased separately)
AXOLUTE AIR: anthracite/white/tech
LIVINGLIGHT AIR: anthracite/white/tech
CHORUS white/black/titanium: ONE/LUX/FLAT/GEO
ARKÉ
EIKON: grey/white/next
with dimensional adaptability kit (can be purchased separately)
PLANA
PLANA SILVER
EIKON EVO: grey/white/next
Note for the installer: with ,BTICINO serie Living, Light, Light Tech Livinglight,
Livinglight tech plates, if they are already present on the recess box and respective
BTICINO frames,it ispossible to insertthe electronicdevice directly inthese frames.
For plates of the series:
BTICINO: LIVING LIGHT - LIGHT TECH - LIVINGLIGHT
(it also requires insertion of the reduce thickness side ledges)
MATIX
AXOLUTE (it also requires insertion of the frame)
For plates of the series:
GEWISS CHORUS: ONE/LUX/FLAT/GEO
ASSEMBLY OF THE ELECTRONIC DEVICE BASED ON THE PLATE USED
Attention: before installing the electronic device, deactivate the 230V~ mains voltage
Important: plateseal on thesub-frame ofthe electronicdevice isonly guaranteedthrough acorrect installation ofthe 503recess box(set flush
in the wallwithout imperfections).
Recessed box (type 503)
Fasten the Sub-frame from
the type 503 recess box
Complete the electrical connections
as per image diagrams in the specific
instructions and insert the devicein the
sub-frame until itlocks
Apply the chosen front (to the 4
lateral blocking teeth present on
the device)
Note:
the images used for the electronic device
and the front are only indicative, useful to
show the correct installation sequence
for the thermostat, or programmable
thermostat, orgas detector.
For other indications, consult the
specific instructions forthe device.
Sub-frame T1
Important: if necessary, prepare the sub-frame T1 and insert the side
ledges (only if required) based on the plate used
paragraph on the front ofthe sheet).
attention to the position of the insertion pins of the ledges note:
reduced thickness extenders only for Bticino series Matix
Hook the 4 hooks of the frame to the
T1 sub-frame
(only for BticinoAxolute civil series)
Electronic device:
thermostat or programmable thermostat or gas detector
Note: insert the batteries in the devices with 3V power supply
Front
Note: only for thermostats where foreseen, also insert the handle
in the same direction as described in the specific instructions
Frame
Important!
only for Bticino Axolute series
(see the previous
Apply to the sub-frame
the plate of the
chosen series
2
The manufacturer reserves the right to make all technical and manufacturing modifications deemed necessary without prior notice.
Loading...