Electric Mirror Seamless AUTOMATIC, Seamless MANUAL Instructions Manual

Seamless™ LED Clock

Remote Control

INSTRUCTIONS

Updated January 2016

GWS

Seamless™ LED Clock Remote Control | INSTRUCTIONS

Adjust Minutes

Press and hold the [MIN] button to adjust the
minutes to the desired time

Adjust Brightness

Press and hold the [DIM] button to adjust the
brightness of the display

Adjust 12/24 Display

Press and hold the [FN] and [HOUR] to set the 12
or 24 hour display preference.

AUTOMATIC Clock
Programming Remote Control

This remote control automatically synchronizes
with the clock module integrated into an Electric
Mirror wall mounted mirror. Once this remote is
programmed for the local time, preferred 12/24
hour display, and desired display brightness level
of the display, it is quickly replicated from guest
room to guest room all synchronized to the same
set time.

FEATURES

• Fastest method to program multiple clocks

• Handheld

• Set it once, synchronizes all mirror mounted
clock to same time

• Integrated clock display

Flip display

Press and hold the [FN] and [MIN] to flip the
display

Reset

Press and hold the [FN] and [DIM] to reset the
remote to its factory setting

PROGRAMMING
INSTRUCTIONS

To program the integrated clock on the mirror, aim
the remote control within 12 inches of the clock.

1. The mirror clock will begin to program
automatically. The clock display will blink 3
times indicating it has programmed.

2. Programming should be complete within 10
seconds. If the clock does not blink, aim the
remote away from the clock for 30 seconds,
and repeat step one.

• Modify hours, minutes, dim level

• 12/24 hour option

• Battery operated

• Portable

OPERATING INSTRUCTIONS

Wake the remote

Press the [FN] button to wake the remote

Adjust Hours

Press and hold the [HOUR] button to adjust the
hours to the desired time

January 2016

THERE’S ONLY ONE™ ELECTRIC MIRROR® | [e-mail] | T [phone] | F [phone] | www.electricmirror.com2

3. Repeat automatic synchronization for each
mirror mounted clock.

4. The remote automatically enters a sleep mode
after 20 minutes to conserve battery power.

Note: Remote requires 4 AA alkaline batteries, not
included.

Seamless™ LED Clock Remote Control | INSTRUCTIONS

Adjust Brightness

Press and hold the [+] or [-] button to adjust the
brightness of the display

Adjust 12/24 Display

Press and hold the [12/24] button to select the 12 or
24 hour display preference

Flip display

Press and hold the [FLIP] to flip the display

Reset

Press and hold the [RESET] to its factory setting

MANUAL Clock Programming
Remote Control

This remote control manually sets the time for each
clock module integrated into an Electric Mirror wall
mounted mirror. There is no display on the remote
control, so programming must be within proximity
of the clock mounted in the mirror.

FEATURES

• Handheld

• Manual settings required for each clock
installation

• No integrated display, uses clock display

• Manually modify hours, minutes, dim level

• 12/24 hour option

• Battery operated

• Portable

PROGRAMMING
INSTRUCTIONS

To program the integrated clock on the mirror, aim
the remote control within 12 inches of the clock.

5. Observe the mirror mounted clock display to
manually set the hours and minutes using the
remote control.

6. Observe the mirror mounted clock display to
manually set the brightness level using the
remote control.

7. Observe the mirror mounted clock display to
manually set brightness level using the remote
control.

8. Observe the mirror mounted clock display
to manually set 12 or 24 hour time display
preference using the remote control.

9. Observe the mirror mounted clock display to
manually reset the remote control.

10. Observe the mirror mounted clock display to
manually flip the display the remote control

11. Repeat programming for each mirror mounted
clock.

OPERATING INSTRUCTIONS

Adjust Hours

Press and hold the [HOUR +] or [HOUR -] button to
adjust the hours to the desired time

Adjust Minutes

Press and hold the [MIN +] or [MIN -] button to
adjust the minutes to the desired time

January 2016

THERE’S ONLY ONE™ ELECTRIC MIRROR® | [e-mail] | T [phone] | F [phone] | www.electricmirror.com3

Note: Remote requires 2 AAA alkaline batteries, not
included.