Electric Mirror Aria, Crown, Bela, Eternity, Eyla Installation Manual

...

Lighted Mirrors

• Aria (ARI2)

• Eyla (EYL2)

• Jewel (JWL2)

• Prism (PRI2)

• Trinity (TRI2)

Installation Guide

ELECTRIC MIRROR®

Installation Guide ELECTRIC MIRROR®

CONGRATULATIONS

You’ve purchased the finest lighted mirror available, from the global leader in mirror technology. This lighted mirror is quick and easy to install, and is designed and manufactured to offer you years of enjoyment.

Please read these instructions thoroughly before beginning installation. If you have any questions, please contact our Customer Service team at 425.776.4946, or customer.support@electricmirror.com.

APPLICATION

These installation instructions apply to the lighted mirrors listed below with a Part # prefix that includes the number 2. For example, the Celebration lighted mirror Part # prefix is CEB2.

To confirm the Part # for your product, look for the product sticker on the inside of the chassis.

• Bela (BEL2)

• Crown (CRO2)

• Eternity (ETE2)

For mirrors not listed above, see additional Installation Instructions located at www.electricmirror.com/installation-instructions.

• Facet (FAC 2 )

• Fusion (FUS2)

• Integrity (INT2)

• Momentum (MOM2)

• Novo (NOV2)

• Novo 4 (NOV42)

• Reflection (REF2)

• Serenity (SER2)

• Silhouette (SIL2)

TABLE OF CONTENTS

1. Review important safety instructions .................................................................................................................................................. 2

2. Unpack your lighted mirror ...................................................................................................................................................................... 2

3. Determine the mirror location ................................................................................................................................................................ 3

4. Prepare the electrical ................................................................................................................................................................................. 4

5. Mount the chassis......................................................................................................................................................................................... 5

6. Connect the electrical ................................................................................................................................................................................ 6

7. Connect optional upgrade technology ............................................................................................................................................... 7

8. Wire the dimming switch .......................................................................................................................................................................... 8

9. Hang the mirror ........................................................................................................................................................................................... 10

10. Clean the mirror ..........................................................................................................................................................................................12

Lighted Mirrors

Installation Guide

ELECTRIC MIRROR®

Installation Guide ELECTRIC MIRROR®

1. REVIEW IMPORTANT SAFETY INSTRUCTIONS

A. Use a qualified electrician.

Your lighted mirror must be installed by a qualified technician or electrician. These instructions assume an

electrical connection has already been brought to the mirror location in the wall. All electrical components must be serviced by qualified electricians. Power source must be disconnected prior to servicing components.

B. Read and follow instructions.

For proper installation, read and install the mirror according to these instructions, and keep a copy for future

use. Failure to follow these instructions voids the warranty.

C. Follow safety precautions.

To prevent injury, the mirror must be installed according to these instructions. Failure to do so could result in

serious injury or death.

2. UNPACK YOUR LIGHTED MIRROR

A. Verify the contents.

Unpack the boxes, and identify and verify all contents prior to installation. In general, your mirror will include the

following:

Chassis Assembly Mirror Assembly* Mounting screws (4-pack)

*Mirror glass is fragile. Keep edge protectors in place and rest mirror on a cushioned surface. Do not place on a

hard surface.

Lighted Mirrors

Mirror Type

Mirror Width

Keyhole Distance from Mirror Top *

Novo

< 36”

1.75”

Novo

≥ 36”

2.5”

All other mirrors

< 36”

4.75

All other mirrors

≥ 36”

5.5”

Installation Guide

ELECTRIC MIRROR®

Installation Guide ELECTRIC MIRROR®

3. DETERMINE THE MIRROR LOCATION

A. Confirm proper mirror orientation.

All lighted mirrors must be mounted in the width x height orientation identified in the part number because the mirror hanger is permanently attached to the back of the mirror and can only be installed in the designated orientation. A leveling keyhole is located at the top center of the chassis to aid in identifying the proper orientation.

B. Determine and mark mirror location on the wall.

The top edge of the mirror glass must be a minimum of 1” from the ceiling.

To ease installation, a keyhole slot is provided in the top center of the chassis. This allows the chassis to temporarily hang on a single screw while being adjusted.

To identify the proper location for the leveling screw, find the appropriate distance in the chart below for your specific mirror. Measure and mark that distance on the wall. This mark must be in the horizontal center of the mirror location. This is the minimum distance needed from the ceiling to the top of the mirror glass.

*This is in addition to the 1” minimum glass clearance from the ceiling.

Lighted Mirrors

Installation Guide

ELECTRIC MIRROR®

Installation Guide ELECTRIC MIRROR®

4. PREPARE THE ELECTRICAL

A. Follow safety precautions.

Turn power off to the circuit via the breaker box powering this mirror. Follow all NEC (National Electric Code) wiring standards for installation.

B. Determine the location where the electrical wiring should come through the wall.

The electrical entry location is the center point from left to right of the mirror chassis. Generally, the wiring needs to come out of the wall roughly 14 inches from where the top of the mirror glass will be located. For specific information visit www.electricmirror.com/product-specifications.

C. Bring electrical power to the mirror location.

The lighted mirror requires a switched 120V 60Hz circuit. If your mirror has additional options, there may be additional power requirements. When bringing out the wiring, leave a 3-foot whip*.

*Ensure a 3’ long electrical whip is available coming out of the wall.

+ 8 hidden pages

Electric Mirror Aria, Crown, Bela, Eternity, Eyla Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual