Electric PRIME TIDE User Manual

PRIME TIDE DIGITAL WATCH MANUAL

ELECTRTICCALIFORNIA.COM

FEATURES AND FUNCTIONS

DESIGN:

-100 METER WATER RATING

-HIGH IMPACT POLYCARBONATE CASE AND PUSHERS

-HIGH DEFINITION LCD DISPLAY WITH ADJUSTABLE CONTRAST

TIDE /TIME MODE:

-175 PRE-PROGRAMMED BEACHES WITH TIDE EVENT PREDICTION

-PROGRAMMABLE LUNAR TIDE MODE FOR CUSTOM BEACH LOCATION

-DUAL TIME ZONES WITH 12/24 HR DISPLAY

HEAT TIMER:

-COUNTDOWN HEAT TIMER WITH ADJUSTABLE HEAT LENGTH

-BEEP AND BACKLIGHT NOTIFICATION

CHRONOGRAPH:

-CHRONOGRAPH WITH 99 LAP/SPLIT LOGGING

-BEEP AND BACKLIGHT NOTIFICATIONS

ALARM: (TIME ALARM OR DIVE ALARM)

-PROGRAMMABLE ALARM WITH BEEP AND BACKLIGHT NOTIFICATIONS

MOON PHASE:

-MOON PHASE MODE WITH UNLIMITED FUTURE MOON PHASE DATA

-SUNRISE AND SUNSET TIMES FOR ALL BEACH LOCATIONS

PUSHER A:

LIGHT/SET

PUSHER B:
START/STOP/UP

PUSHER C:

NEXT MODE

PUSHER D:
RESET/DOWN

06

00

TIDE/TIME MODE

TO SET YOUR TIDE/TIME MODE:

TO ACCESS THE TIME/TIDE PRESS PUSHER C TO CYCLE THROUGH THE MODES
UNTIL YOU SEE ‘TIDE’. HOLD PUSHER A TO ENTER SETTING MODE. USE PUSHER
B/D TO INCREASE/DECREASE FIELD VALUE AND USE PUSHER C TO MOVE TO
NEXT SETTING FIELD. IN SETTING MODE YOU CAN SELECT TIME ZONE 1 OR 2
(T1/T2), SELECT 12/24HR FORMAT, SET TIME OF DAY, DATE, DST ON/OFF, NIGHT
MODE ON/OFF, CONTRAST LEVEL, TONE LEVEL AND FIND/SELECT YOUR BEACH
CONTINENT, REGION, SUB-REGION, BEACH AND TIDE HEIGHT UNITS (F/M).
PRESS PUSHER A TO EXIT SET MODE.

PUSHER A:

-PRESS FOR LIGHT

-HOLD TO SET
TIME/TIDE

PUSHER C:

-PRESS FOR
NEXT MODE

DAY OF THE WEEK AND

DATE ARE SHOWN HERE

CURRENT TIME

NEXT TIDE EVENT
SHOWN HERE

PUSHER B:

-PRESS TO
ADVANCE 24HRS
OF TIDE INFO

PUSHER D:

-PRESS TO GO
BACK 24HRS OF
TIDE INFO

READING THE TIDE GRAPH

24 HOUR TIDE GRAPH:

THE TIDE GRAPH SHOWS THE WHOLE DAY (24 HRS) OF TIDE DATA AT ONCE. THE
VERTICAL BAR SHOWS WHERE THE TIDE IS RIGHT NOW. WHEN READING TIDE
GRAPH KEEP IN MIND 3 VERTICAL PIXELS = 1 METER OR 3 FEET OF TIDE HEIGHT.

TIP: USE THE CROSSHAIRS ON THE TIDE GRAPH TO QUICKLY GAUGE THE TIDE
HEIGHT. THE CROSSHAIRS ARE SPACED EVERY 3 PIXELS HIGH SO YOU CAN
GET A MORE ACCURATE READING AT A QUICK GLANCE. EACH CROSSHAIR
REPRESENTS 3 FEET OR 1 METER OF TIDE HEIGHT.

THIS LINE SHOWS WHEN THE

SUN IS UP (DAYLIGHT HOURS)

THIS BAR SHOWS
WHERE THE TIDE
IS NOW (2:15 PM)

THIS IS ZERO

TIDE HEIGHT

THESE NUMBERS MARK THE

HOURS OF THE DAY (00-24)