Electra Light E-Line User Manual

E-LINE

USER MANUAL

USER MANUAL – E-LINE

1

○ Product instruction

Thank you for choosing our professional 575W moving head

★ This user guide includes very important information to guarantee the safe and proper use of

the light, please read carefully and operate according to the instruction.

★ This moving head light applied advanced design and processing technique, adopted new

type high intensity high temperature resistant engineering injected plastics. With modern,

streamlined and beautiful outlook. The product used super-translucent lens and HMI575W

lamp, being able to create accurate, bright and sharp beam, with 8 rotating gobos and 8

colors stream effect plus rainbow effect, performing the completely new lighting effect; LED

display can control DMX code and function selection, built-in disturbance resistant circuit

and over-heat protection; perfect and compact construction, scan angle pan 540 degree

and tilt 270 degree; high speed shutter flash uninterruptedly 1-11 times per second, with

console reset and self-correction function, especially suitable for TV station, stage, disco

and nightclub.

★ 575 Moving Head light is a high-tech product with perfect function. It combines mechanism,

electron, and optics and adopted international standard DMX 512 signal.

○ Technology Parameter

● Voltage: AC220V

● Frequency: 50HZ

● Power: 575W (HMI575 lamp)

● Channel: 12 channels

● Applied modern ABS engineer plastic housing

● Digital display can be reversed 180 degree, suitable for different installation

● 16Bit super smooth scan, pan 540 °tilt 270 °, 8Bit or16Bit selectable, scanning speed adjustable

● The light adopted halls location realised precise location and super quiet reset, overcomes noise

during reset.

● With advanced photo electricity reset system, when disturbed incidentally, the light can reset

automatically, that is with scanning location memory function.

● Two blades strobe, flash speed can reach 15Hz

● Motorized focus, super smooth focus adjustment

● 5%--100% linear dimmer reset via controller

● Can realise reset via controller

● With built-in program, can set up program via digital display and make the light run automatically

● Built-in microphone, music activated

● can realise master and slave control

● Directional: reverse or obverse direction of x axis and y axis selectable

● Double gobo wheel: 9 self rotating gobo + blank + shake

● Double color wheel: 9 co lour + white, with streamline effect

● With 3 facet prism and prism rotation function

● Size: 48 x 44 x 57 cm

● Net Weight: 37Kg

USER MANUAL – E-LINE

2

○ Safety instruction

！Please consult eligible persons before maintenance

！Please make sure the power supply has been cut off during installation, maintenance, and

transportation.

！Please do not use power supply and lamps of different specifications.
！ During operation, the high temperature the light creates might lead to danger, therefore

please don’t put any inflammable and explosive things around the light, and please don’t

touch the light body during operation.

！Make sure there is more than 1 meter between the light and the irradiated objects.
！In order to avoid harming your eyes, please do not look at the light beam directly

○

Packing List

● 575 light body (2PCS)

● The user manual (1PCS)

○ Installation Instruction

● The product is suitable for indoor use only; operation temperature is below 35 degree.

● The installation, operation and maintenance persons must get familiar with the light

performance before operation, so that to avoid damage to the machine.

● Please check if there is any damage during transportation before first usage.

● Before changing the bulb, please make sure the electric power is cut off and the lamp is

cooled off. (Bulb temperature can reach above 200 degree.)

● Push the maintenance cover, open the small bulb lid, encase the bulb, please note to put

the air bulb side up, and please don’t touch the bulb by hand.

● Cover the small lid.

● Install the product in well ventilated places and please note to check whether the fan and

the fan net are unimpeded or not.

● Connect the bicolor line (yellow and green) to the ground.

● 575 moving head uses 5A/250V fuse, please use the fuse of same specification.