Electra VPM.1FR02, VPM.2SR02, VPM.3FR02, VPM.5SR02 User Manual

Download

Page 1

VIDEO OUTDOOR PANELS (1 – 5 Families) for TL door phone systems

User manual

4 wires

1 Fam. Video

2 Fam. Video

3 Fam. Video

5 Fam. Video

Page 2

ContentsEN

Safety instructions

Description of the video outdoor panels

Recommended cables. Installation

Use of the video outdoor panels

Safety instructions

Description of the video outdoor panels

Functions of the video outdoor panels

= 12 … 14 Vd.c.

294 x 144 x 53 mm

1,52 kg

o o

- 30 C … + 60 C

VPM.1FR02

Video outdoor panel

VPM.2SR02

260 x 110 x 33 mm

1,3 kg

= 12 … 14 Vd.c.

294 x 144 x 53 mm

o o

- 30 C … + 60 C

VPM.3FR02

Video outdoor panel

VPM.5SR02

260 x 110 x 33 mm

1,3 kg

CMOS, 1/3", 573(H) x 597(V), 800 TVL video 1 Vpp / 75 W; PAL

70º ± 25º orientable video camera

Case: aluminum + 4 mm chemically toughened glass

IR LEDs, 850 nm, IR-CUT for night vision - 10m TOUCH keys for call and family name,

backlighted during night

Access – RFID card Access – RFID card

Wall mounting height: 160 cm

1,52 kg

Any intervention on the installation must be performed by AUTHORIZED PERSONNEL!

DO NOT power the product at 110 – 230 Va.c.! DO NOT hit the glass screen with hard objects!

If the glass screen is broken, DO NOT touch the product.

Protect the products against lime and dust during renovation activities.

175 cm

130 cm 115 cm

160 cm

Maintenance of the video outdoor panels

Warranty

Page 3

Functions of the video outdoor panels

Recommended cables. Installation.

The outdoor panel is mounted on the wall at a height of 1.60 m from the upper edge of the panel (see page 1). Depending on the maximum distance between the outdoor panel and the last terminal in the installation, the recommended cables are the following:

Option 1) 4 wires x 0.5 mm (type H03VV-F4G 0.5) for maximum 75 lm

Option 2) 4 wires x 0.75 mm (type H05VV-F4G 0.75) for maximum 150 lm

Build features:

Solid mechanical construction, built in embedded technology, with chemically toughened glass. Weatherproof, waterproof and with an operating temperature range between -30º…+ 60º C. Electronic anti-condensation system for the video camera screen. Anti-theft sensor that is activated during unauthorized unmounting from the wall. Day/night sensor for the command of TOUCH keyboard backlighting and the lighting of the IR LEDs and IR-CUT. TOUCH keyboard with the name of the resident, backlighted during night. 1/3 CMOS, 900TVL color video camera and IR LEDs for b/w image during night. Blinking red LED, signaling the presence of potential video monitoring from the panel. In-built RFID reader. Access by secured RFID tag/card. Allows the connection of a DVR, for extended monitoring and video recording from the panel.

Settings/Programming

Programming and deletion of RFID building access tags/cards. Programming of new address 2, 3 or 4, for parallel connected panels, in case of buildings with multiple entrances. (maximum 4 outdoor panels for one building). Enabling or disabling of video monitoring signaling (Red LED ON/OFF), through the JP1: RED LED/0. (ch. 4.1-step 4)

Enabling or disabling DVR video recording (ON/OFF) through the jumper JP40: 1-2 (OFF) / 2-3(ON) (ch. 4.1) Extensions

Allows the parallel connection of maximum 4 outdoor panels, through a video selection box (VSB). Allows the connection of an additional video camera directly to the central supply unit (SCU), or of 4 additional video cameras, through a video selection box (VSB).

Connections

to the VPM

outdoor panel

C/D

GND

C/D

GND

UTP cat5e (AWG24) UTP cat6e (AWG23)

25-30mm

6mm

VinVout

6mm

25-30mm

Connections

to the SCU

central supply unit

+U C/D

GND Vin

C/D

6mm

25-30mm

GND

Vout

6mm

25-30mm

Connections

to the SCU

central supply unit

Connections

to the VPM

outdoor panel

*Important:

Maintain the same colors for the same connections. Example: +U = Red, C/D = Blue, GND = Black, Vin/Vout = Green.

For electrical safety reasons, we recommend installing an earthing cable between the panel and the SCU, connected to an earth grounding (ISO - IEC 60950-1:2005)

Option 3) UTP cat5e (AWG24) or UTP cat6e (AWG23), for maximum 250 lm The wires will be arranged as per the below table:

Page 4

4.1

Installation of the smart Video Outdoor Panel (VPM)

STEP 1

Mounting on the wall - Flush

Only for maximum 8 fam. video outdoor panels

Setting of image recording on DVR from the outdoor panel, with JP2: DVR

+25

5cm

≈20cm

1.5 cm

Mount back the family name module

Signaling of video monitoring: JP1 on RED LED position No video monitoring signaling: JP1 on 0 position

Mounting on the wall - Surface

Unmount the module and add name labels

STEP 2

STEP 3

STEP 4

STEP 5

JP1

RED LED

JP2

DVR

JP 2

Video camera angle adjustment. (The video camera will be oriented towards the entrance door/gate!).

Page 5

Torx

Flush

Torx

Electrical connections diagram for the smart Video Outdoor Panel (VPM)

Electrical connections in the panel

Torx

Mounting the outdoor panel on the wall

Surface

Important: For both types of mounting, the Torx screws for fastening the outdoor panels on the wall will be very well tightened, to prevent the anti-theft alarm sensor from setting off.

C/D

GND

Vout

C/D

GND

Vout

4.2

STEP 1STEP 1.1

Page 6

C/D

GND

Vin

C/D

GND Vout

C/D

GND Vout

Electrical connections diagram for 1 and 2-family residences

Vcam

GND

Vin2

110Va.c., 50Hz, 60Hz 230Va.c., 50Hz, 60Hz

SWC 1

SWC 2

SWC

LC 1

LC 2

LCK

AUX 1

AUX 2

LA 1

LA 2

LS 1

LS 2

AUX

L N

2x6Aa.c.

Fam. 1

(address 1)

VPM

(address 1)

GNG 2

GNG 1

DBL 1

DBL 2

Doorbell

C/D

GND Vout

C/D

GND Vout

C/D

GND

Vin

C/D

GND

Vin

OUT

Fam 1

GONG

4.3

Vcam

GND

Vin2

110Va.c., 50Hz, 60Hz 230Va.c., 50Hz, 60Hz

SWC 1

SWC 2

SWC

LC 1

LC 2

LCK

AUX 1

AUX 2

LA 1

LA 2

LS 1

LS 2

AUX

L N

2x6Aa.c.

VPM

(address 1)

C/D

GND Vout

C/D

GND

Vin

OUT

Fam 2

GNG 2

GNG 1

DBL 1

DBL 2

Doorbell

GONG

Fam. 1

(address 1)

C/D

GND

Vin

Note2: Any type of TL terminal can be mounted indoors. For Fam. 1, the terminal has address 1, which is set by the producer.

The additional terminals mounted in parallel will have the address of the main terminal

For Fam. 2, the terminal will be programmed with address 2. See Ch. 6

of the user manual for TL audio-video terminals.

Note1: For residences with 1 family and one entrance (entrance 1),

the outdoor panel has address 1, which is set by the producer. For multiple entrances: Entrance 2, Entrance 3, Entrance 4, panels 2, 3 and 4 will be programmed according to the procedure in Ch. 4.6.

GNG 2

GNG 1

DBL 1

DBL 2

Doorbell

GONG

Fam. 2

(address 2)

SCU

OUT1

PROG

BAT 110/230V

OUT2

SCU

OUT1

PROG

BAT 110/230V

Fam 1

Page 7

Vcam

GND

Vin2

110Va.c., 50Hz, 60Hz

230Va.c., 50Hz, 60Hz

SCU

OUT1

PROG

BAT 110/230V

SWC 1

SWC 2

SWC

LC 1

LC 2

LCK

AUX 1

AUX 2

LA 1

LA 2

LS 1

LS 2

AUX

L N

2x6Aa.c.

OUT3

C/D

GND

Vin

OUT2

C/D

GND

Vin

GNG 2

GNG 1

DBL 1

DBL 2

Doorbell

C/D

GND

Vout

GNG 2

GNG 1

DBL 1

DBL 2

Doorbell

GNG 2

GNG 1

DBL 1

DBL 2

Doorbell

C/D

GND

Vin

C/D

GND

Vin

C/D

GND

Vout

C/D

GND

Vout

C/D

GND

Vout

Fam. 3

(address 3)

Fam. 2

(address 2)

Fam. 1

(address 1)

VPM

(address 1)

OUT

GONG

Fam 2

Fam 1

Fam 3

Note: For residences with 3 families and one entrance (entrance 1),

the outdoor panel has address 1, which is set by the producer.

For multiple entrances: Entrance 2, Entrance 3, Entrance 4, panels 2, 3

and 4 will be programmed according to the procedure in Ch. 4.6.

Note: Any type of TL terminal can be mounted indoors.

For Fam. 1, the terminal has address 1, which is set by the producer.

The additional terminals mounted in parallel will have the address of the

main terminal

For Fam. 2 and Fam. 3, the terminal will be programmed with address 2,

respectively address 3. See Ch. 6 of the user manual for TL audio-video

terminals.

Electrical connections diagram for 3-family residences

4.4

Page 8

Electrical connections diagram for 5-family residences

Note: Any type of TL terminal can be mounted indoors..

For Fam. 1, the terminal has address 1, which is set

by the producer.

The additional terminals mounted in parallel will have the

address of the main terminal

For Fam. 2, 3, 4 and 5, the terminal will be programmed with

address 2, respectively addresses 3, 4 and 5. See Ch. 6

of the user manual for TL audio-video terminals.

OUT

Note: For residences with 5 families and one entrance (entrance 1),

the outdoor panel has address 1, which is set by the producer.

For multiple entrances: Entrance 2, Entrance 3, Entrance 4,

panels 2, 3 and 4 will be programmed according to the

procedure in Ch. 4.6.

VPM

(address 1)

GONG

Vcam

GND

Vin2

110Va.c., 50Hz, 60Hz

230Va.c., 50Hz, 60Hz

C/D

GND

Vin

SCU

OUT1

PROG

BAT 110/230V

SWC 1

SWC 2

SWC

LC 1

LC 2

LCK

AUX 1

AUX 2

LA 1

LA 2

LS 1

LS 2

AUX

L N

2x6Aa.c.

OUT2

C/D

GND

Vout

C/D

GND

Vout

Doorbell

GNG 2

GNG 1

DBL 1

DBL 2

C/D

GND

Vin

Doorbell

Fam. 4 (address 4)

GNG 2

GNG 1

DBL 1

DBL 2

C/D

GND

Vin

Doorbell

GNG 2

GNG 1

DBL 1

DBL 2

C/D

GND

Vin

Doorbell

GNG 2

GNG 1

DBL 1

DBL 2

C/D

GND

Vin

OUT 4

OUT 2

OUT 3

OUT 1

C/D

GND

Vin

C/D

GND

Vout

C/D

GND

Vin

Doorbell

GNG 2

GNG 1

DBL 1

DBL 2

GONG

OUT

VCB

Fam. 5 (address 5)

Fam. 3 (address 3)

Fam. 2 (address 2)

Fam. 1 (address 1)

Fam 2

Fam 1

Fam 3

Fam 4

Fam 5

4.5

Page 9

Electrical connections diagram for multiple parallel panels (more entrances in a building)

4.6

To one or

more families

C/D

GND

Vout

C/D

GND

Vout

VPM1 (address 1)

110Va.c. 230Va.c.

C/D

GND

Vin

VPM2 (address 2)

C/D

GND

Vin

C/D

GND

Vin

C/D

GND

Vin

110Va.c. 230Va.c.

OUT 1

C/D

GND

Vout

C/D

GND

Vin

C/D

GND

Vout

C/D

GND

Vout

SCU1 SCU2 SCU3 SCU4

VSB

OUT 1 OUT 1 OUT 1

1 2 3 4

C/D

GND

Vout

C/D

GND

Vout

C/D

GND

Vout

C/D

GND

Vout

VPM3 (address 3) VPM4 (address 4)

Important: One VPM outdoor panel and one SCU central unit will be mounted at each entrance.

The VPM1 panel keeps address 1, which is set from the factory. The VPM2 panel with address 2 Long press the PROG. button at SCU 2 Long touch the Fam.1 key at the VPM2 panel. long beep Short touch the Fam.1 key, twice Two short beeps conﬁrmation. The VPM3 panel with address 3 Long press the PROG. button at SCU 3 Long touch the Fam.1 key at the VPM3 panel. long beep Short touch the Fam.1 key, three times Three short beeps conﬁrmation. The VPM4 panel with address 4 Long press the PROG. button at SCU 4 Long touch the Fam.1 key at the VPM4 panel. long beep Short touch the Fam.1 key, four times Four short beeps conﬁrmation.

Note: After the beep conﬁrmation of the new address in the panel, go to the SCU of the panel and short press the PROG. button. The programming of the address is ﬁnished.

The programming of the addresses for the panels connected in parallel is done as follows:

Fam 2

Fam 1

Fam 3

Fam 4

Fam 5

Fam 2

Fam 1

Fam 3

Fam 4

Fam 5

Fam 2

Fam 1

Fam 3

Fam 4

Fam 5

Fam 2

Fam 1

Fam 3

Fam 4

Fam 5

Page 10

Use of the Video Outdoor Panels

1. STAND-BY: The call keys with the name of the residents are permanently backlighted during night. The Red LED

blinks permanently.

2. CALL: Touch the key corresponding to the name of the family you are looking for. The call is acoustically signaled with a ding-dong. Each touch of the key reinitiates the call.

4. END OF TALK: - After 1 min. from the call, if the resident does not answer.

- At 10 sec. after the door/gate is opened.

- Immediately, if the resident decides to end the talk without opening the door/gate.

3. TALK: If the resident answers, talk is initiated. The maximum duration of the talk is 2 min.

5. ACCESS: The door/gate will be open during the time set at the SCU (maximum 10 sec.). Access granting is

acoustically signaled through a confirmation beep sequence.

6. RFID TAG/CARD ACCESS: If you program the RFID tags/cards in the outdoor panel, each resident of the building has access using the secured RFID tag/card from ELECTRA. Approach the tag/card to the RFID area marked on the outdoor panel. The access is signaled acoustically, through a confirmation beep sequence, and visually – the symbol blinks white.

Manual programming of the RFID TAGs/CARDs in the panel

At the moment of the delivery from the factory, the TL video outdoor panels do not have access tags/cards memorized. In order to have access in the building after installation, it is mandatory to program the RFID tags/cards in the outdoor panel. During programming the installation has to be connected to the grid (110V/230Va.c.) and fully operational.

1. Go to the place where the SCU central unit of the installation is mounted. Long press (3 sec.) the PROG button on the SCU. The Red LED turns on.

2. Take the RFID tags/cards to the outdoor panels. To program them, approach every tag/card for one second to the RFID area of the outdoor panel. For each programmed tag/card, the panel issues two short beeps. Repeat this step for programming all the RFID tags/cards.

3. Go to the place where the SCU central unit of the installation is mounted. Short press the PROG button on the SCU. The Red LED turns off. The installation returns to normal functioning, successfully ending the programming mode

Orientable video camera

RFID reader.

RFID tag/card access

Microphone

Fastening Torx screw

IR LEDs

(night lighting)

Touch keys for call, with the name of the residents

Speaker

Fastening Torx screw

1 Fam. 5 Fam.

2 Fam., 3 Fam.

Fam 2

Fam 1

Fam 3

Fam 4

Fam 5

Fam 1

294 mm

274 mm

115 mm

145 mm

Deleting the RFID access TAGs/CARDs from the panel

5.2

This procedure applies when you wish to give up access with RFID tags/cards. During the deletion of the RFID tags/cards, the installation has to be connected to the grid (110V/230Va.c.) and fully operational.

1. Go to the place where the SCU central unit of the installation is mounted. Long press (3 sec.) the PROG button on

the SCU. The Red LED turns on. The installation enters programming mode:

Note: The Red LED can be disabled through jumper JP1 (RED LED) on the board of the keyboard, when the name labels are added.

5.1

Page 11

2. To delete the RFID access tags/cards from the memory of the panel:

- Long touch the Fam. 1 key until the acoustic confirmation of the panel with a long beep.

- Short touch the Fam. 1 key 7 times. The panel issues two short confirmation beeps.

- Immediately after, long touch (2-3 sec.) the Fam. 1 key. All the codes of the RFID access tags/cards are deleted permanently. The action is acoustically confirmed by a long beep.

3. Go to the place where the SCU central unit of the installation is mounted. Short press the PROG button on the SCU. The Red LED turns off. The installation returns to normal functioning mode.

4. Optional: From the outdoor panel, check if the old RFID tags/cards grant access. When each RFID tag/card that has been deleted from the memory is approached to the panel, a low frequency beep will be issued.

Adding a new RFID access TAG/CARD in the panel

This procedure applies when you wish to add new RFID access tags/cards in the outdoor panel.

1. Collect all the RFID tags/cards from all the people who have access in the building and prepare the new access

tags/cards.

2. First, follow the procedure described in chapter 5.2 for deleting all the tags/cards from the memory of the panel.

3. Follow the procedure described in chapter 5.1. In this case, when you perform point 2 of chapter 5.1, it is mandatory

to approach both the new access tags/cards, and the old tags/cards to the RFID area of the panel, for reprogramming.

4. After performing point 3 of chapter 5.1, check if access is granted for all the programmed and reprogrammed RFID access tags/cards.

The Touch Line audio-video terminals must be kept away from water, lime or any liquid substances, blows, fumes, powders, dust etc. For cleaning the glass screens, use a clean cloth and a special solution for glass washing. In case of renovation activities, the entire surface of the panels will be protected with plastic foil. DO NOT undo the electrical connections of the video door phone installation components. DO NOT short-circuit the electrical connections of the video door phone installation components.

a. Warranty is granted according to the current legislation in the buyer's country of residence, based on the purchase documents. b. Warranty is granted for the hidden defects of the components used in production and in case of the system not functioning

according to the present user manual.

WARRANTY IS NOT GRANTED FOR: c. Inappropriate installation and use. d. Deterioration, intentional blows. e. Unauthorized interventions to any of the components of the installation f. Theft, fire, natural disasters g. Lack of protection of the installation components in case of renovation activities.

Maintenance of the video outdoor panels

Warranty

5.3

Page 12

Designed and produced by ELECTRA Made in EU

11.2017 USM.VPM.5XR02.ELY04

ELECTRA s.r.l

Bd. Chimiei nr.8,Iași - 700291 - RO +40 232 214.370 +40 232 232.830 sales@electra.ro www.electra.ro

ELECTRA

Bischoffgasse 5/3-4, 1120 Wien - AT +43 1 810 20 99 sales@electra-automation.at www.electra-automation.at

Building Communications GmbH

Certiﬁcate no. E307311

ISO 9001:2008 ISO 14001:2009

Certiﬁcates no. 73 100 4856, 73 104 4856

by TÜV HESSEN

The products are manufactured under

Quality and Environment Management System

The products are

CE certiﬁed.

The products contain UL-compliant

printed circuit boards.

Certiﬁcate by

709

ICPE

ELECTRA is a trademark of ELECTRA Group - No. 008958332 EUIPO - Alicante, Spain ELECTRA products are registered as Industrial Models at EUIPO - Alicante, Spain