Electra evolution User Manual

Page 1

KIT VIDEO DOOR PHONE evolution 2 families

Call from the Outdoor panel keys; Possibility to see on the Terminal's display the person calling ; Full duplex hands-free audio communication; Command of the access gate/door opening from the indoor Terminal ; Video and audio monitoring of the entrance of the property, by the inhabitant;

Optional connection of up to 4 additional video cameras; Optional auxiliary command: auto-access, garage door, etc.; Optional 1 video Terminal or up to 3 audio Terminals in parallel, for each family; Optional maximum 3 Outdoor panels in parallel;

.UTP CAT 5e (AWG 24) cable required

Harry Johnston

Oliver Thompson

USER MANUAL

Page 2

1 K IT COMPONEN TS

Outdoor panel

1 pc.

294 × 144 × 53 mm

Indoor terminal

2 pcs.

212 × 96 × 30 mm

Supply control unit

1 pc.

130 × 141 × 73 mm

Access tag

10 pcs.

35 x 62 x 7 mm

Video connection box

1 pc.

100 × 71 × 60

Supply tension of the system (supply of the control unit)

Video communication

230 V±10% / 50 Hz

0,4A AC

Audio communication

Full-duplex

Data communication

Digital

Analog video signal

Maximum power expenditure from the 230 V AC network

2 TECHNICAL FEATURES OF THE SYSTEM

Supply tension

12,0 ... 14,3 V DC(stabilized)

Steerable video camera module

- CCD, 1/3”, 573(H) x 597(V) pixel resolution; 420 TV Lines;

- angle of visualization: 96° horizontal, 45° vertical;

- video signal: 1Vvv/75 PAL;

- presence of video camera – 1 RED LED, intermittently on;

- left-right rotation angle: ± 25° 13 LED's = 850 nm; 7mW/sr per LED radiated

luminous intensity

Infrared illumination

2.1 Technical features of the Outdoor video panel

Harry Johnston

Oliver Thompson

Page 3

2.2 Technical features of the video Terminal

Supply tension

12,0 ... 14,3 V DC(stabilized)

Keyboard

Permanent RED signaling of the VOLUME key if the terminal is turned off.

Adjustments

Audio communication volume: MAXIMUM LEVEL – MEDIUM LEVEL – TURNED OFF

- Image characteristics: luminosity, chrominance, video impedance adjustment

TOUCH type,4 keys Backlit on touch

3.5” or 2.4” LEC, TFT, resolution: 320 x RGB x 240; Display Up/down/right/left visibility angle: 10/35/50/50

Display

Range of transport and storage temperatures

- 33°C ... + 55°C

Dimensions

Weight

0,4 kg

212 x 96 x 30 mm

Operating temperature range

0°C ... + 45°C

Case

ABS Glass screen, 3 mm thick

Mounting

Surface

Casing protection level (IP)

IP31

Display of the inhabitant's name

Case

Aluminum profile painted in electrostatic field; Secured glass screen, 8 mm thick

Mounting

Flush

Keyboard

TOUCH type, permanently backlit

Casing protection level (IP)

IP44

Operating temperature range

- 30° C ... + 60°C

Transport and storage temperature range

- 33° C ... + 55° C

Dimensions

294 x 144 x 53 mm

Weight

1,52 kg

Backlit name space

Page 4

2.3 Technical features of the Supply control unit

Supply tension

+14V - GND : +14V DC (stabilized)/ 2A DC

+ Uv GND : +14V DC -

Vcam

GND : +12V DC -

(stabilized)/ 0.5A DC

(stabilized) / 0.4A DC

Generated power tensions/ power capability

Case

Mounting

Fireproof ABS

- On DIN rail: TH 35 x 15 or 35 x 7,5 in compliance with DIN46277-3, EN50022, IEC60715

- Surface: with A3,5 x 32 plastic screws and ø 6 mm pins

Casing protection level

Operating temperature range

IP31

0°C ... + 45°C

Transport and storage temperature range

Dimensions

Weight

- 33°C ... + 55°C

130 x 141 x 73 mm

0,4 kg

230V±10%/50Hz

Outputs (derivations)

-On DIN rail: TH 35 x 15 or 35 x 7,5 in compliance with DIN46277-3, EN50022, IEC60715

-Surface: with plastic screws and pins

Case

ABS

Mounting

0,21 kg

100 x 71 x 60 mm

Casing protection level (IP)

IP31

Operating temperature range

0° C ... + 45° C

Range of transport and storage temperatures

- 33° C ... + 55° C

Dimensions

Weight

Main input – output

2.5 Technical features of the Video connection box

Functioning frequency

125kHz

2.5 Technical features of the Access tag

Page 5

3 B LOCK D IAGRAM OF THE SY STEM

Main

terminal

Additional terminal 1

From the

video

connection

box

All additional products are sold separately.

Additional terminal 2

Additional terminal 3

Additional terminals in parallel (optional)

For more than 1 external video camera and outdoor panels in parallel, a video selection box is necessary.

ACC

12V/1,3Ah

(Optional)

Supply control unit

Terminal 1

Panel

OUTDOOR

INDOOR

230 V AC

Terminal 2

Video

connection

box

ccu

mul

Electromagnetic

lock DC / AC

External

Video Camera

(Optional)

Case

Reading distance

ABS

25 mm

Casing protection level (IP)

Operating temperature range

IP 65

-30°C ... + 60°C

Range of transport and storage temperatures

Dimensions

Weight

- 33°C ... + 55°C

35 x 62 x 7 mm

7,5 g

1 out of 1.099.511.627.700

Harry Johnston

Oliver Thompson

Page 6

4.1 Recommended cables

Outdoor panel Supply control unit

UTP CAT5e (AWG24) cable for distances of maximum 70 m between the outdoor panel and the supply control unit and 250m between the outdoor panel and the video terminal. For distances greater than 250 m, please request additional information from the producer.

Video terminalVideo connection box

To the video

Terminal

Panel

Supply control unit

Video selection box

3.2 Block diagram of the connection of additional Outdoor panels (optional)

INSTALLATION4

To the video Terminal

Video selection box

Panel 1 Panel 2 Panel 3 Panel 4

Supply control

unit 3

Supply

control

unit 2

Supply control

unit 4

Supply control

unit 1

3.1 Block diagram of the video selection box connected with 4 additional video cameras (optional)

Harry Johnston

Oliver Thompson

Harry Johnston

Oliver Thompson

Harry Johnston

Oliver Thompson

Harry Johnston

Oliver Thompson

Harry Johnston

Oliver Thompson

Page 7

Supply control unit

Flexible, multistrand cable, (Cu) 2 or 3 x 0,75 mm² for distances of maximum 50 m or (Cu)2 or 3 x 1 mm² for distances of maximum 100 m.

Electromagnetic lock (optional)

Supply control unit

Flexible, multistrand cable, (Cu) 3 x 0,75 mm²

230 V AC network

External video camera (optional)

UTP CAT5e (AWG24) cable for distances of maximum 200m between the external video camera and the Supply control unit. ATTENTION! Because the signal output of the video camera is on a coaxial cable, a balun adapter will be used for the passage from a coaxial cable to AWG24 cable, installed between the signal output of the video camera and the Vin2 and GNV2 inputs of the Supply control unit.

Supply control unit

è ATTENTION! The installation, the connection to the 230V/50 Hz network and

the maintenance of the Supply control unit will only be carried out by authorized personnel!

è The installation of the Supply control unit is recommended to be made within

an electrical panel.

è ATTENTION! DO NOT UNFASTEN THE FRONT LID! DANGER OF ELECTRIC

SHOCK! Only the protection lids of the connections can be unfastened.

è ATTENTION! It is mandatory for the supply of the Supply control unit from the

230 V/50Hz network to be made through two automatic fuses of 10 A (on phase and null). The connection of the F and N terminals of the Supply control unit will be made through two isolated (Cu) wires, with a section of 0,75mm²

è ATTENTION! During the installation, connection of the Supply control unit at

the 230 V/50Hz network and during service, the safety fuses from the panel must be opened. (POWER OFF)

è The connection of the (Cu) 0,75mm² grounding wire between the grounding

terminal of the electrical panel and the grounding terminal of the Supply control unit is MANDATORY.

è IMPORTANT! Before connecting the Supply control unit's supply fuses, check

the precision of the connections in the system. Check both visually, and by measurement with an ohmmeter.

è IMPORTANT! Install the protection lids of the Supply control unit's connections

before connecting the 2 supply fuses (230V/50Hz).

è PAY ATTENTION to the polarity of the terminals when connecting them to the

Supply control unit of a buffer accumulator (max. 7 Ah). The inversion of the terminals leads to the failure of the accumulator. The installation and connection of the accumulator will be carried out by authorized personnel.

è DO NOT TOUCH the wires exiting from the connectors and the terminals of the

control supply unit. Disconnect the fuses (10 A) from the supply's phase and null of the Supply control unit.

è ATTENTION! Do not supply components of the installation separately (Outdoor

panel, Terminals etc.) at tensions higher than 15V DC or directly from the network (230V/50Hz). DANGER OF ELECTRIC SHOCK and of the door phone system's destruction.

4.2 Safety instructions for installation

Page 8

4.3 Installation of the Supply control unit

DIN rail mounting

Wall mounting

RetainerDIN rail

A3,5 x 32 screw (2 pcs.) B2,9 x 9,5 screw (4 pcs.)Protection lid (2 pcs.)

The accumulator will be connected to the terminals of the power supply, after the commissioning of the system.

4.4 Installation of the Video connection box

Retainer

DIN rail

A3,5 x 32 screw (2 pcs.) B2,9 x 9,5 screw (4 pcs.)Protection lid (2 pcs.)

DIN rail mounting

Wall mounting

Frontal view Lateral view Back view

Frontal view

Lateral view

Back view

Page 9

The terminal will be placed at the

155cm height (recommended height)

4.5 Installation of the video Terminal

Before starting...

A3,5 x 32(35) screw

(4 pcs.)

Cable retainers – adapters

≈18 cm

Cable length (from the wall)

4.6 Installation of the Outdoor panel

The Outdoor panel is installed at the entrance of the property or building, on the body closest to the access door, at a height of approx. 1.7 m (upper part) from the ground, protected from rain and sunrays.

Lateral viewFrontal view Back view

The Outdoor panel keys numbering is from the bottom up, the first key meaning address 1.

Page 10

Before starting...

The Outdoor panel is installed at the entrance to the building, on the body closest to the entrance door.

Detail of camera adjustment

Customization of the name display

Remove the plastic pad from the keyboard module

Affix a sticker with the name, cut to size, on the white space allocated to it.

Insert the pad back into the keyboard module

frontal view lateral view back view

Door phone cable

Antitheft protection

2 3

Tor

crew

The Torx screw must be completely screwed. Otherwise, when the system is powered, the panel emits a permanent acoustic signal. This warning function is useful if an unauthorized person tries to open the Outdoor panel. The alarm turns on immediately after one starts to unscrew the Torx. The function is turned off during the programming of the panel’s parameters.

2,5 x 8 mm screw Video camera angle adjustment

Torx Screw

for antitheft protection

Page 11

PROG

CO NNECTI ON DIAGRAM

BROWN

GREEN

BLUE

External video

camera

GREEN

NGE

BLUE

GREEN

cumula

2 x 0,5 mm

ACC

7 Ah

lectr

cal p

nel

30 V

Cabl

3 x 0,

75 m

m

GND

V 1

GNV

n 2

LA/C

ply c

ont

l u

BROWN

ANGE

BLUE

BROWN

BLUE

UTP

CAT 5e

(

WG 24)

10A

GREEN

UTP

CAT

(

WG 24)

Panel

(

)

NDO

ted

ith

out exter

r came

t con

nect

d -

h exteri

or camer a

GREEN

ORA

BLUE

BROWN

min

bell

GREEN

ANG

BLUE

14V

BROWN

l 2

1+2

n-o

BLUE

BROWN

GREEN

ORANGE

BLUE

BROWN

GREEN

BLUE

BROWN

GREEN

ORANGE

Vid

o c

nec

n b

UTP

(AWG

24)

(

)

UTP

CAT

(

AWG

24)

Door Opening Button

DC Electromagnetic lock

(Optional)

AC Electromagnetic lock

Auxiliary command

see ch. 5.3

onnection o

one e

xternal

video camera

(Optional)

UTP CAT 5e

(AWG 24)

Page 12

COMMISIONING OF THE SYSTEM

6.1 Description of the supply control unit

TIME:

Lock timing adjustment

The Supply control unit includes:

Protection lid for the connections

Front lid

LED signaling of programming / defect within the system

*PROG. : programming button

S2: existence of tension at the +Uv - GND terminals

S1: presence of tension at the +14V - GND terminals

*The kit does not require programming. This button is used only if you add additional Terminals or panels to the system.

5.1 Installation of the electromagnetic lock

Direct current (DC)

Direct current

electromagnetic lock (DC)

LC2

Cable

2 x 0.75 mm

BUT

LA/C

Supply control unit

LC1

Cable

2 x 0.75 mm

Alternative current

electromagnetic

lock (AC)

BUT

LA/C

Transformer

12 V230 V A C

Supply control unit

Alternative current (AC)

Ÿ The Supply control unit can supply a current of max. 1A

for the supply of the lock.

Ÿ The tension of +14 V DC is present on the LC terminal of

the Supply control unit.

Ÿ The connection of a lock actuating button from the

interior of the building will be made at the BUT and LC terminals of the Supply control unit.

(optional)

A C

AUX 2

Automation

Relay contact

Maximum switched current: 1.5 A

5.2 Connection of the auxiliary command (optional)

GNV 2

Vin 2

Vcam

GND

BUT

LA/C

AUX 2

AUX 1

5.3 Connection of one external video camera (optional)

External

video camera

V/(+)

Supply control unit

Jumper

G/(-)

Video Balun

BROWN

GREEN

BLUE

ORAN GE

BLUE

BROWN

UTP cable

CAT 5e

Not connected - with exterior camera

ORANGE

GREEN

Core Cable (for power)

If in a system you want to install more than one External video camera, you need to connect it to the Video Selection Box (VSB.4DN.BLW)

Coaxial Cable (video signal)

BNC

connectors

RCA

connectors

Braid (GND)

Central Conductor (+12V)

Maximum output current from the Supply Control Unit to power a video camera is of 0,4 A

Ÿ The Supply control unit can supply a

current of max. 1A for the supply of the lock.

PROG

Page 13

How to adjust the audition level of the video Terminal:

Through consecutive touches of the VOL UME key, different audition levels are obtained: OFF (mute) – red LED, MEDIUM white-red LE D, MAXIMUM – white LED

After checking leave the Terminal on open volume position (white on).LED

6.3 Checking the functions and adjustments

Check anywhere in the installation, during the call and the communication, and make sure that the +14V – GND and +Uv – GND supply tension is higher than 12,0V. Check the functions of the Terminals and of the Outdoor panel: call, communication, access, audio and video monitoring. The system is adjusted by the producer in what concerns the audio part, for standard functioning conditions.

How to adjust the image characteristics on the video Terminal:

If due to the type of system (type of cable) the image on display is not qualitative, successively adjust (on the back of the Terminal) until the maximum result is obtained, in the following order:

1. Impedance adjustment;

2. Luminosity;

3. Chrominance.

Any intervention in the system will be made with the system disconnected from the 230V AC supply network (the phase and null fuses are opened) and from the accumulator (the +ACC terminal is disconnected).

6.4 Troubleshooting

Check the existence of the supply tensions with the values mentioned below, at the terminals of the Supply control unit (use a direct current voltmeter)

Ÿ Tensions measured at the terminals of the Supply control unit :

+14V – GND /13,8 … 14,3V DC +Uv – GND /13,5 … 14,3V DC

Ÿ Tensions measured at the terminals of the Outdoor panel and at the terminals of the

Terminals:

anywhere in the system

+ 14V - GND min. 12 V DC + Uv - GND min. 12 V DC

If necessary, adjust the image of the Terminal :

• In case of an unclear image, adjust:

IMPEDANCE ADJUSTMENT 6

• For color or brightness, adjust

CHROMINANCE 4

LUMINOSITY 5

Make sure that the Torx screw of the Outdoor panel is completely screwed to prevent turn ing on the anti-theft alarm.

Connect the Supply control unit to the 230 V AC network, by connecting the two automatic 10A fuses, installed on phase and null.

Optionally, connect the accumulator to the +ACC and –ACC terminals of the Supply control unit.

PAY ATTENTION to the polarity of the accumulator!

Check the precision of the connections in the system!

The +14V , GND , CD , GNV and Uv signals are common to all components of the system. The Vin and V out signals are specific to each Terminal or video camera (they are not to be

connected jointly). Any short circuit between them leads to the non-operation of the entire system.

6.2 Checking the precision of the connections in the system and the connection of the Supply control unit

Page 14

Short circuit in the system between +14V and GND

Control unit: S1: green S2: PRO G:

There is no image on the display, the system functions only on audio mode

Identify the spot of the short circuit. Remedy the defect and turn the system on.

The CALL does not function

Control unit: S1: green S2: green

PRO G:

Terminal:The keyboard

is functioning, it does not take the call command.

Outdoor panel:

Emits an error signal .

No CD connection at the terminals of the Terminal, or CD wire interrupted before reaching the terminals of the Terminal.

Connect the CD to the Terminal or check the continuity of the CD wire from the audio connection box to the Terminal.

The system does not Function (Supply control unit without accumulator)

Control unit: S1: intermittent green S2: PROG:

Identify the spot of the short circuit. Remedy the defect and turn the system on.

Control unit: S1: green S2: green

PRO G: intermittent red Terminal: The keyboard

is functioning, it does not take the call command.

Outdoor panel:

Emits an error signal

The CALL does not function

Remedy the short circuit. (by case)

Short circuit between the CD and GN D , +14V connections.

Control unit: S1: green S2: green

PRO G:

During call or monitoring there is no image on the screen of the Terminals. All the other functions of the system are active

- Check the +Uv connection between the Supply control unit – Video connection boxes – Terminals.

- Locate and remedy the defect.

- Lack of tension between the +Uv and GNV terminals of the Terminals

- Lack of Vout connection at the terminals of the Outdoor panel or at the Vin or Vout terminals of the Supply control unit.

The system does not function (Supply control unit without accumulator)

Lack of tension from the 230V AC network

Check the 10A fuses from the electrical panel and the 1,6A Fuse 1 from the Supply control unit input. Check the continuity of the supply cables.

Control unit: S1: S2: PROG:

Short circuit in the system between +Uv and GNV .

Problem

Signaling

Solutions

No.

Possible causes

The system functions correctly

Control unit: S1: green S2: green PRO G:

Page 15

The system functions (Supply control unit with accumulator)

The accumulator is in charging mode

At a repeated monitoring command on any video Terminal installed, the image disappears (black LCD screen)

Connect the JP1 jumper. Check that at a repeated monitoring command, the image on the Terminal's screen remains unchanged.

The system functions (Supply control unit with accumulator)

Defect accumulator or discharged

The system functions (Supply control unit with accumulator)

Lack of tension from the 230V AC network The system functions powered by the accumulator

Replace the

accumulator

Check the 10A fuses from the electrical panel and the 1,6A Fuse 1 from the Supply control unit input. Check the continuity of the supply cables.

USE

Do not hit the glass screen with hard objects! If the front glass screen cracks, DO NOT touch the product!

7.1 User safety instructions

The JP1 jumper on the Supply control unit is NOT CO NNE CTED, at each stroke of the MONITORI NG key , the image on the screen of the Terminal will change from the image sent by the video Outdoor panel to off screen (there is no video signal connected to the Vin2 input of the Supply control unit)

Control unit: S1: green S2: green PRO G:

Control unit: S1: intermittent red – green S2: green

PROG:

Control unit:

S1: intermittent red –

green

S2: green

PROG:

acoustic signal

Control unit: S1: red S2:

PROG:

During the call and/or communication, the image on the Terminal's screen presents horizontal or oblique lines, fixed or mobile (moar)

Control unit: S1: green S2: green

PRO G:

Locate and remedy the defect.

The wires connected to the Vin / Vout and GNV terminals are not twisted until close to the terminals (until approx. 1 cm from the terminals).

Page 16

3 ACCESS

After the command, the lock is unblocked for 1...10 s for the access of the visitors.

// You cannot grant access without having a prior communication. .

2 CALL AND COMMUNICATION

Call duration: maximum 15 s (3 calls)

Communication duration: maximum 2 min.

The LED of the key blinks and the display shows the image sent by the video camera of the Outdoor panel. By touching the key, communication is initiated. The LED does not blink anymore

Do not touch the key during communication.

END COMMUNICATION NO ACCESS! The second touch of the key ends communication without granting access and

the Terminal returns to stand-by mode.

7.2 Use of the video Terminal

1 STAND-BY

The keyboard is not backlit. At the first touch, the keyboard is backlit and the Terminal may receive the

following commands: AUDIO – VIDEO MONITORING +VIDEO CAMERA SELECTION

Monitoring duration: 10 s By touching this key, you may see and listen to what goes on at the entrance, in front of the Outdoor panel. Monitoring is not possible if another Terminal of the system is being called or is during communication. // If several video cameras are installed within the system, the successive stroke of the key changes the camera through which the monitoring is done. VOLUME ADJUSTMENT OR

“TERMINAL TURNED OFF” By successive touches of this key, the 3 volume levels are passed through:

maximum (white LED), medium (red-white LED) and turned off (red LED). The red LED will remain permanently turned on until the key is pressed again.

ANSWE R THE CALL

ACCESS and END COMMUNICATION!

No matter what the state of the Terminal is: monitoring, call or communication, this key may action an automation connected to the system: auto access or garage gate, lighting system etc.

4 COM MAND AUX

AUXILIARY COMMAND

Stand-by

Call

Communication

Page 17

7.3 Use of the Outdoor panel

1 STAND-BY

The key of the Outdoor panel and the inhabitant’s name are permanently backlit. The intermittent RED led signals the presence of video monitoring.

2 CALL AND COMMUNICATION

Call duration: maximum 15 s ( 3 calls) Communication duration: maximum 2 min.

Touch the key . The call to the inhabitant is signaled acoustically. You may end the call by pressing again the key . If the inhabitant answers, communication is initiated. If access is granted, the panel emits an acoustic signal, and the lock remains unblocked for maximum 10 seconds. If the inhabitant does not answer, after a minute, the panel returns to stand-by mode.

The symbol indicates the RFID tag reading area.

7.4 Use of the Access tag

Step

Supply control unit

PROG

Long stroke of PRO G. The red LE D is on.

The tags are already memorized. When used, the panel emits a recognition acoustic

signal and the symbol blinks green.

7.5 Programming additional tags

Touch with the tags, piece by piece, the symbol.

BEEEEEP

After each memorized tag [ ].

Outdoor panel

Step

PROG

Press PROG.

The red LE D is off, programming procedure is terminated.

Any error during programming is signaled with [ ] .

BEEEEEP

In this case, the procedure must be recommenced from Step 2 .

Supply control unit

7.6 Deleting all the programmed tags

Use this procedure only if you lost one or more of your tags. The remaining ones must be programmed again.

First

Key

from

bottom up

Long press the key [ . The Panel enters programming.

BEEEEEP

]

7 short touches 2 x [

BEEP

BEEEEEP

Immediately one long press [ The tags are deleted.].

Step

PROG

Press PROG.

The red LE D is off, programming procedure is terminated.

Supply control unit

Step

Supply control unit

PROG

Long stroke of PRO G. The red LE D is on.

Outdoor panel

Step

Harry Johnston

Oliver Thompson

Page 18

11.2014 USM.KIT.VPE.2F0.ENY

Designed and Manufactured by ELECTRA Made in EU

ELECTRA Building Communications GmbH

Parkring 10, Liebenberggasse 7 | 1010 Wien – Austria Phone +43 1 516 33 – 3817 | Fax + 43 1 516 33 – 3000

office@electra-automation.at

MAINTENANCE

The Outdoor panels must be kept away from corrosive substances, lime or mechanical shocks. The Terminals must be kept away from water, or any other liquids, mechanical shocks, fumes, dusts etc. The components of the system can be cleaned with a piece of soft, cotton cloth. The optional accumulator connected with the Supply control unit will be replaced after the expiry of its life span. The Supply control unit ensures the accumulator's charging, as long as the accumulator is not defect. The state of the accumulator is indicated by the signals of the LED S1 and the acoustic warning in case of a defect.

WARRANTY

A three year warranty is granted, from the purchase date, on the basis of the proof of purchase and if the system was used according to the technical manual.

NO WARRANTY IS GRANTED for: inappropriate installation and use, deliberate damaging, theft, arson, natural disasters, unauthorized interventions to the system, the lack of protection of the system's components in case of renovation activities in the building.

The BELLCOME video systems for residential buildings are produced in compliance with the EU standards and bear the CE conformity marking.

AUTHORIZED REPRESENTATIVE of ELECTRA S.R.L.