Elecom WRC-1900GHBK-S, WRC-300FEBK-S, WRC-1167FEBK-S, WRC-1167GHBK-S, WRC-1467GHBK-S Setup Manual

■

Names and Functions of Parts

Check that the lamp is lit.

Connect the equipment.

Turn on the terminal device and this product.

■ Installation of the product (router)

Setup Guide

Back

Back

Back

Left side view Back view

WRC-1900GHBK-S • WRC-1467GHBK-S • WRC-1167GHBK-S • WRC-1167FEBK-S •
WRC-300FEBK-S

INTERNET:
Lit or blinking

This manual provides a summary of and the specifications for this product as well as explains this product's usage
precautions.
It also contains an FAQ that explains actions you can take if you have problems such as the product malfunctioning.
Note that this manual is common for the WRC-1900GHBK-S • WRC-1467GHBK-S • WRC-1167GHBK-S •
WRC-1167FEBK-S • WRC-300FEBK-S (which only supports 2.4 GHz). The WRC-300FEBK-S does not support the
11ac/11a (5 GHz) standards.

⑤

①

②

③

④

⑥

⑦

⑧

⑨

⑩

* WRC-300FEBK-S does not have a

5G WLAN lamp or INTERNET lamp.

• WRC-1900GHBK-S and WRC-1467GHBK-S units cannot be mounted
horizontally. Be sure to use it in the vertical orientation.

• Whether in a horizontal or vertical position, the product should not be placed
in a location such as between a wall and a desk but in a well-ventilated area.

Do not place this product so as to overlap network equipment such as a

modem or terminal device.

• The stand is not secured to the product. Place the product on the stand after
connecting the cables to the product.

* Be sure to follow the installation method described below and use this product

correctly.

As dropping this product or yanking a cable during operation could lead to damage or data
loss, be sure to stabilize the product by placing it on the stand included and take measures
to prevent dropping or yanking.

Vertical placement Horizontal placement

• Face the side with the LED lamp forward.

• Refer to the
illustration to set
the back side of the
product on the
provided stand in a
way that it fits
snuggly in the
groove.

• Face the side with the LED lamp upward.

• Place the product
on the center rear
of the provided
stand so that the
body does not
wobble.

Check that the lamps on the modem, etc and this
product are lit correctly.

Use the illustration as a reference for wiring various
devices.

①

Connect the power cable of the

terminal device.

If there is a power switch, turn on

the switch.

②

Connect the AC adapter included

with the product.

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

WPS lamp (red)

Power lamp
(white)

2.4G WLAN lamp
(white)

5G WLAN lamp
(white)

*1

WPS setting
button

*2

RESET button

*2

LAN ports/LAN
lamps 1 - 4
(white)

*3

INTERNET port/
INTERNET lamp
(white)

*3

DC IN
(power supply jack)

Stand

Blinking: WPS setting button is pressed and WPS function is running.
Blinking continues at 0.5-second intervals for approximately 2 minutes.
Not lit: WPS function is not running.

This is used to connect to a wireless device with WPS function (such as a wireless LAN adapter).
To use this, press the button for 2 seconds or more.

When this button is pressed continuously for more than 10 seconds, the WPS lamp
blinks and the product’s settings are initialized (returned to the factory default settings).
Do not turn off the power during the WPS lamp is blinking.

Connect the AC adapter included with the product. Do not connect any AC adapter other
than the one included with the product.

For instructions on how to use the stand, please read the attachment “Installation
method and precautions”.

*1 WRC-300FEBK-S does not have a 5G WLAN lamp.
*2 The positions of the WPS setting button and RESET button on WRC-300FEBK-S are different from those shown in the

illustration.

*3 WRC-300FEBK-S does not have LAN port lamps 1 to 4 and INTERNET lamp.

This indicates the connection status of 2.4 GHz band (11n/g/b) and 5GHz band (11ac/n/a).
Lit: Wireless LAN connection is established.
Blinking: Wireless LAN connection is underway.
Not lit: Wireless LAN connection is not established.

These ports are used to connect PCs and network equipment to this product with a LAN cable.
Lit: LAN cable connection with PC or network equipment is established.
Blinking: Data is being transferred.
Not lit: Cable is not connected.

Connect the cable of the WAN (Internet)-side devices of various types of modems (ONU,
CTU, etc.). An LED lamp is located next to the port.
Lit: Connection with WAN-side device is established.
Blinking: Data is being transferred.
Not lit: Cable is not connected.

Lit: Power of this product is on
Not lit: Power of this product is off

POWER:Lit

LAN cable

AC outlet

To AC outlet

INTERNET port (blue)

①

To AC outlet

②

Terminal device
(cable TV modem,
ONU, CTU, ADSL)

Installation method and precautions

Configuring settings from smartphones and PCs Configuring settings from smartphones and PCs

WRC-1900GHBK-S • WRC-1467GHBK-S • WRC-1167GHBK-S • WRC-1167FEBK-S • WRC-300FEBK-S Series Setup Guide Oct 31,2016, Version1 ©2016 ELECOM CO., LTD. ALL RIGHTS RESERVED.

Connection is complete if a check

mark is shown in front of the SSID.

XXXXXX

After Step of the wireless connection is completed, the Web
browser automatically launches and “

かんたんセットアップ 2

”
appears on the screen. Follow the steps below to set this
product to the “

ルーターモード

” (Router Mode).

1

Wireless connection with
the product

Step of “ . Configuring the Router Mode of this Product” is displayed.

2

1

3-A

1 2

3-B 3-C

For a wireless connection with this product, enter the wireless
configuration information provided in the “

か んたんセットアップシ ート

(

初期値

)” bundled with the product.

Have the “

か ん たんセットアップシ ート (初期値

)” ready at hand.
The operational procedures vary depending on the computer, tablet, or
smartphone you are using.

Windows 10/8.1/7 Mac OS X iOSAndroid

Enter the password in
the “

パ ス ワ ード

”
(Password) column to
log in to the
configuration screen
of this product and
click (tap) [適用]
(Apply).

Click (tap) [

自動設定

] (Automatic

Configuration).

Enter the “

ユーザー名

” (User Name)

and “

パ ス ワ ード

” (Password) and then

click (tap) [次へ] (Next).

● For the “

ユーザー名

” (User Name) and “

パ

ス ワ ード

” (Password) here, enter the
authentication ID and password for the
Internet connection provided to you by your
contracted provider. The name may differ
depending on the provider.

Enter each item on the
screen and click (tap) [次へ]
(Next)

● Only when there is a specified

fixed IP address from your
contracted provider should you
enter the information from the
provider for each item.

● Because the password has

not been initialized, enter
the “

パスワード

”
(Password) that you
decided on your own.

So that you do not forget

the password, write it
down in the“

かんたんセッ

ト アップ シ ート (初期値

)”

and keep it in a safe place.

XXXXXX

XXXXXX

XXXXXX

XXXXXX

XXXXXX

1

1

Configuring the Router Mode of this Product”

2

2

3

1

2

Click the “Wireless” icon on the
task tray.

Select the “SSID (Wireless Name)”
listed in the “

か んた ん セットアップ

シ ート (初期値

)” and then click

[接続] (Connect).

Enter the “Encryption Key (All
SSID)” provided in the “

かんたん

セットアップ シート (初期値

)” and

then click [次へ] (Next) or [OK].

* For Windows 8.1, switch to the desktop screen.
* Screen examples are described in Windows 10

Click the “Wireless” icon on the
upper right side of the desktop
and then click the “SSID (Wireless
Name)” from the list provided in
the “

か んた ん セットアップ シ ート (初

期値

)”.

1

Tap the “設定” (Settings) icon on
the home screen.

1

Swipe down from the top of the
screen and then tap the "Settings"
icon from the menu that appears.

2

Tap “Wi-Fi” and then tap the “SSID
(Wireless Name)” provided in the
“

か んた ん セットアップ シ ート (初期

値

)”.

3

Enter the “Encryption Key (Same
for All SSIDs)” provided in the “

かん

た んセットアップシ ート (初期値

)” and

then tap [接続] (Connect).

2

Tap “Wi-Fi” and then tap the SSID
(Wireless Name) provided in the
“

か んた ん セットアップ シ ート (初期

値

)” .

3

Enter the “Encryption Key (All
SSIDs)” provided in the “

かんたん

セットアップ シート (初期値

)” and

then tap [接続] (Connect).

* The screen may differ depending on the iOS

version of the terminal.

Enter the “Encryption Key (All
SSID)” provided in the “

かんたん

セットアップ シート (初期値

)” and

then click [接続] (Connect).

* If the Wi-Fi is off, click [

Wi-Fi を入にする

]

(Turn On Wi-Fi).

http://192.168.2.1/wizard.html

* In the event that even though you have conducted the tasks

described on the left the configuration screen is not display,
please try again or reset the router. To reset, press and hold
the RESET button on the back of the product for 10 seconds or
more.

XXXXXX

XXXXXX

In the event that “

かんたんセットアップ 2

” (Easy Setup 2) is not automatically displayed

on the screen, enter the URL address or use the QR code displayed on the right.

XXXXXX

5

XXXXXX

5

* Before the above screen is displayed, if a

sharing-related message such as “

こ の ネ ット
ワーク上の他のPC やデバイスが､このPC を
検出 でき るようにしま すか ?

” (Will you enable
this PC to be detected by other PCs and
devices on the network?), click [

いいえ

] (No)

The connection is complete if a
screen like the following appears.

XXXXXX

5

Connection is complete if “

接続済み

”

(Connection Completed) is displayed.

XXXXXX

Connection is complete if a check

mark is shown in front of the SSID.

XXXXXX

XXXXXX

XXXXXX

● When the automatic configuration for the

router mode settings is completed, “

セ ット

アップ 完了

” (Setup Complete) is displayed

on the screen.

● When the automatic configuration does not

work, the screen for the or
operation may be displayed. Continue the
procedures by following the steps displayed
on the screen.

3-A 3-B

If the above screen appears, connection to the
Internet is completed.

* WRC-300FEBK is compatible with 2.4

GHz only.

If SSIDs for both 2 .4GHz and 5
GHz are displayed in the list, select
either one.

Reference

かん たん セットアッ
プ シ ート (初期値

)

IP address

Password

(Optional settings)

User name

MAC address

SSID (Wireless Name)

Encryption Key (Same for All SSIDs)
[Router control
screen access

information]

[Router WAN
side
information]

〈ルーター管理画面アクセス情報〉

〈ルーターWAN側情報〉

IPアドレス
パスワード

（任意設定）

ユーザー名

MACアドレス

2.4GHz
5GHz

elecom2g-xxxxxx
elecom5g-xxxxxx

1a2B3c4D5e6F

暗号化方式（全SSID共通）：WPA2-AES

SSID（無線名） 暗号化キー（全SSID共通）

admin192.168.2.1

設定後に記入してください。

12:34:56:AB:CD:EF