Elecom TK-FCP011 series User Manual

- 1 -

Function key

WARNING

Do not put this product in fire, as the product may burst, resulting
in a fire or injury.

Do n ot conn ect or disconne ct the connect or with a w et hand ,
modify the connector or bend it forcibly, as this may
cause a fire or electric shock.

CAUTION

Do not place this product in any of the following environments:

In a car exposed to sunlight, a place exposed to direct •
sunlight, or a place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur•
In an uneven place or a place exposed to vibration•
In a place where a magnetic field is generated (near a magnet, •
etc.)
In a dusty place•

This product does not have a waterproof structure. Use and
store this product in a place where the product body will not
be splashed with water or other liquid.
Rain, water mist, juice , coff ee, s team o r swea t may also
cause product damage.

When you no lo nger need to use th is produc t a nd the
battery, be sure to dispose of it in accordance wi th the local
ordinances and laws of your area.

Cleaning the Keyboard

If the product becomes dirty, wipe it with a soft, dry cloth.

Use of a volatile liquid (paint thinner, benzene, alcohol, etc.)
may affect the material quality and colour of the product.

Low-profile pantograph keyboard

TK-FCP011 series

User's Manual

S

tep

1

Check USB ports

Check the USB port on your computer

USB port

Any USB port may be used.•
This product can be connected to a USB hub. •
However, it may not work depending on the
power supply capability of the USB hub.

S

tep

2

Installing the keyboard

Activate the PC.

If Windows•

®

prompts you to choose an account
(a user name) when it starts up, b e sure to log
on using an administrator account.
Wait until Windows•

®

has started up completely.

Use the keyborad

Thank you for purchasing the ELECOM Low-profile pantograph keyboard
TK-FCP011 series.
This manu al describes the operating instructions an d safety p recautions
for using this product. Ensure that you have read this manual before using
the product. After reading this manual, store it somewhere safe for future
reference.
* Except in certain cases, the TK-FCP011 Series is referred to as “this product”

in this manual

Volume+

Increases the volume of entire Windows

®

system.

Volume-

Lowers the volume of entire Windows

®

system.

Mute

Stops the audio output of the entire Windows

®

system.
When you press this button once again, mute is
released.

Playback/Pause

Plays back media such as music.
When you press this button during playback,
playback is stopped temporarily. *1

Media player

Activates media player.

My computer

Displays the [My computer] screen
(the [Computer] screen for Windows
Vista

®

or Windows® 7 users).

Stop

Stops media such as music. *1

To previous track

When you press this button during playback of music
or other media, you move to the previous track. *1

To next track

When you press this button during playback of
music or other media, you move to the next track. *1

Meaning of symbols



WARNING

Failure to observe precautions may result in serious
personal injury or death due to fire, electric shock, or
other causes.

CAUTION

Failure to observe precautions may result in personal
injury due to electric shock or other causes, and may
damage other equipment.

Prohibited action

Mandatory action

Situation that needs attention

Notes and reference information

Information that is handy to know

Observe these precautions carefully to avoid personal injury,

damage, fire, and other problems.

WARNING

If an abnormality is found with this product (emission of heat, smoke
or abno rmal smell from the product), or if a foreign object (water,
metal chip, etc.) enters the pro duct, i mmediately stop using the
product and disconnect it from your PC.
If you continue to use the pro duct under these conditions, it may
cause a fire or electric shock.

Do not drop or hit this product.
If this product is damaged, immediately stop using the product and
disconnect it from your PC.
If you continue to use the product in a damaged condition, it may
cause a fire or electric shock.

Do n ot atte mpt to disassem ble, mo dify or repair this product by
yourself, as this may cause a fire, electric shock or product damage.

Part Names

Insert the product’s USB connector into a PC USB

port.

Insert here.

USB port

USB Connecto r

Carefully check the orientation of the
connector and the place where you will
connect the USB connector.

The Windows® standard driver is installed automati-

cally.

Calculator

Activates the calculator.

Sleep

Switches the PC to sleep state and restores the PC
from sleep state.

You can change the setting of the function
performed by pressing the sleep button
from Windows

®

. For details, see “Sleep

Key” of the reverse side of this paper.

The behavior of the system may be different from the above depending on your environment.

Package Contents

This product’s packaging contains the items listed below. Before
using the product, check that all items are present. We make every
effort to ensure that all products are packaged correctly. However,
in the event that an item is missing or damaged, contact the retailer
from whom you purchased the product.

Keyboard main unit• (Cable length : 1.5m) x1
User’s Manual x1•

Safety Precautions

By pressing a key between the [F1] and [F11] keys with icons while holding down the key, you can adjust the volume of the entire Windows® system, operate media player, or activate the calculator.

key (function key)

When a key between the [F1] and [F11] keys is pressed while holding down the key, it works as a multi-media key.

Whe n Num Lock , Caps Loc k, or Sc roll Loc k is

activated, the respective LED is lit.

Removing the keyboard



This product is hot-pluggable.
The keyboard can be removed while Windows

®

is

running.

Operation may become unstable if the
keyboard is disconnected and reconnected
several times when Windows

®

is running. If

this occurs, restart Windows

®

.

*1 When media player is active

This product is a 106-key layout keyboard. Depending on the user's
operating environment, the actual characters that are output of certain
keys may differ from how they are labelled.

- 2 -

With the product connected to the PC, follow the procedure below to remove the
unknown device.

Display Device Manager.

Windows•

®

7 and Windows Vista

®

1

. From the [Start] menu, right-click [Computer].

2

. Click [Properties].

3

. Click [Device Manager].

Windows• ® XP

1

. From the [Start] menu, right-click [My Computer].

2

. Click [Properties].

3

. Click the [Hardware] tab.

4

. Click .

The Device Manager window appears. Right-click the unknown device, and click

[Uninstall].

Click .

Disconnect the receiver unit and restart the PC.

Repeat the procedure from “Step 2 - Installing the keyboard” on the front of this

sheet.

Sleep key

The sleep key allows you to shut down Windows® and put Windows® to or restore
Windows

®

from the sleep mode (These functions are equivalent to Sleep/Wake in

the ACPI function).

The sleep key may not function depending on your environment.

Method of changing the setting of the sleep key



You can change the setting of the function performed by pressing the sleep key.
For example, you can set the sleep key to do nothing even if a button is pressed
or to put the PC to sleep state only when the sleep key is pressed.

Windows• ® Vista and Windows® 7 users

With th is product connected, c lick [Start] - [Cont rol Panel] - [Hardware and
Sound] - [Power Options].

From [When I press the sleep
button], you can change the function
performed by pressing the sleep key
of this product.

Windows• ® XP users

With this product connected, click [Start] - [Control Panel] - [Performance and
Maintenance] - [Power Options].

By clicking [Power Options Properties]

- [Advanced], you can change the
function performed by pressing
the sleep key of this product from
[When I press the sleep button on my
computer] under [Power buttons] on
this screen.

Troubleshooting

When the product appears to be malfunctioning

Unstable operation, no character entered when a key



pressed



When the keyboard was connected to the USB port, the standard Windows®

driver may not have been installed, causing the product to be registered as
“Unknown device.” This product is usually detected as a USB human interface
device. If it is detected as an unknown device, see “Removing an unknown
device,” and after removing the device from Device Manager, repeat “Step 2 ­Installing the keyboard” on the front of this sheet.

Removing an unknown device

If the standard Windows mouse driver did not install correctly and this product is
detected as an unknown device, remove the unknown device from Device Manager,
and then repeat “Step 2 - Installing the keyboard” on the front of this sheet.

If there are multiple unknown devices, before removing a device, check •
that it is actually this product. Disconnect the keyboard and check which
unknown device disappears. The device that disappears is this product.
If the unknown device does not disappear even after you have deleted •
the driver foll owing the instruc tions bel ow, it i s possibl e that there i s
something wrong with the PC. Contact the PC manufacturer.

Basic Specifications

Product name Low-profile pantograph keyboard

Article No. TK-FCP011 series

Supported models PC/AT compatible machines equipped with a USB port

OS

Windows

®

7, Windows® Vista (SP1 to SP2), XP (SP2 to

SP3)

Supported interface

USB1.1

Key arrangement Japanese 103 key arrangement

Key pitch 19.0 mm

Key stroke 2.5 mm

Cable length 1.5 m

Dimensions 384.6 (W) x 124.6 (D) ×13.0 (H) mm

Operating
temperature/humidity

5 to 40°C, 90% RH max. (no condensation)

Storing temperature/
humidity

-10 to 60°C, 90% RH max. (no condensation)

Low-profile pantograph keyboard

TK-FCP011 Series

User's manual

1st edition, January 10, 2012

ELECOM Co., Ltd

This manual is copyright of ELECOM Co., Ltd.

•

Unauthorised copying and/or reproducing of all or part of this manual is prohibited.

•

The specifications and appearance of this product may be changed without prior

•

notice for product improvement purposes.
ELECOM Co., Ltd. shall bear no responsibility for any and all affects resulting from

•

the use of this product regardless of the above reasons.
Export or service transaction permission under the Foreign Exchange and Foreign

•

Trade Control Law is required in order to export this product or parts of this product
that constitute strategic materials or services.

Windows and the Windows logo are trademarks of the Microsoft group of companies.

•

Company names, product names, and other names in this manual are generally

•

trademarks or registered trademarks.

©

2012 ELECOM Co., Ltd. All Rights Reserved.

Hereby, ELECOM Co., Ltd., declares that this product is in compliance with the essential require­ments and other relevant provisions of Directive [2006/95/EC].

ELECOM CO., LTD.

1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765

URL: http://www.elecom.co.jp/global/

[e-mail]

宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704 号
電話 : 86-21-33680011
FAX : [phone]
URL : http://www.elecom-china.com/

ELECOM Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea
TEL : [phone]
FAX : [phone]
URL : www.elecom.co.kr
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)
TEL : [phone]
FAX : [phone]
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL: [phone]
e-mail: [e-mail]
URL: http://www.elecom-india.com/