Elecom TK-FBS035E series User Manual

- 1 -

Bluetooth® Silicone Keyboard

TK-FBS035E series

User’s Manual

Thank you for purchasing the ELECOM Bluetooth® Silicone Keyboard.
This product employs an English keyboard layout and Bluetooth

®

wireless
technology.
This manual describes the operating instructions and safety precautions
for using this product. Ensure that you have read this manual before using
the product. After reading this manual, store it somewhere safe for future
reference.
* Except in certain cases, the TK-FBS035E Series is referred to as “this

product” in this manual.

Meaning of symbols



WARNING

Failure to observe precautions may result in
serious personal injury or death due to fire,
electric shock, or other causes.

CAUTION

Failure to observe precautions may result in
personal injury due to electric shock or other
causes, and may damage other equipment.

Prohibited action

Mandatory action

Situation that needs attention

Notes and reference information

Safety Precautions

Observe these precautions carefully to avoid personal injury, damage, fire,
and other problems.

WARNING

If a foreign object (water, metal chip, etc.) enters the product,
immediately stop using the product and remove the batteries
from the keyboard. If you continue to use the product under these
conditions, it may cause a fire or electric shock.

Cautions for Wireless Equipment

This product is wireless equipment using the entire range of the 2.4 GHz
band and it is possible to avoid the band of mobile object identification
systems. GFSK is used for the radio wave method. The interference
distance is 10 m.
The 2.4 GHz band is also used by medical equipment, and wireless LAN
equipment conforming to the IEEE 802.11b/11g/11n standard.

Before using this product, check that there are no other “radio stations”* •
operating nearby.
If electromagnetic interference occurs between this product and other •
“radio stations”, move this product to another location or stop using this
product.

* Other “radio stations” refer to industrial, scientific and medical devices using

the 2.4 GHz band like this product, other radio stations of this type, licensed
radio station premises for mobile object identification system that is used in
factory production lines, certain non-licensed low power radio stations and
amateur radio stations.

WARNING

Do not use this product with any device that may have a seri-•
ous impact in the event of a malfunction. There are rare cases
where an external radio wave at the same frequency or the
radio wave emitted from a mobile phone causes this product to
malfunction, slow down, or fail to operate.
Do not use this product in a hospital or other locations where the •
use of radio waves is prohibited. The radio waves of this product
may affect electronic and medical devices (e.g. pacemaker).
The use of a wireless keyboard in an aircraft is prohibited by •
aviation law because doing so may interfere with flight safety.
Turn off the keyboard before boarding an aircraft and do not
use it in the aircraft.

* ELECOM is not liable for any accident or social damages

incurred by the failure of this product.

Package Contents

This product’s packaging contains the items listed below. Before using the
product, check that all items are present. We make every effort to ensure that all
products are packaged correctly. However, in the event that an item is missing
or damaged, contact the retailer from whom you purchased the product.

Keyboard x1•
AAA alkaline battery x2•
Roll-up strap x1•
User’s Manual x1•

WARNING

If an abnormality is found with this product (emission of heat,
smoke or abnormal smell from the product), immediately stop
using the product, shut down connected devices, and after
thoroughly checking that heat from the product will not cause
burns, remove the batteries from the keyboard. After doing this,
contact the retailer from whom you purchased the product. If you
continue to use the product under these conditions, it may cause
a fire or electric shock.

Do not drop or hit this product.
If this product is damaged, immediately stop using it, turn it off,
and remove the batteries.
If you continue to use the product in a damaged condition, it may
cause a fire or electric shock.

Do not attempt to disassemble, modify or repair this product by
yourself. Doing so may cause a fire, electric shock, or product
damage and may void the warranty.

Do not put this product in fire, as the product may burst, resulting
in a fire or injury.

CAUTION

Do not place this product in any of the following environments:

In a car exposed to sunlight, a place exposed to direct sunlight, •
or a place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur•
In an uneven place or a place exposed to vibration•
In a place where a magnetic field is generated (near a magnet, •
etc.)
In a dusty place•

This product does not have a waterproof structure. Use and
store this product in a place where the product body will not be
splashed with water or other liquid.
Rain, water mist, juice, coffee, steam or sweat may also cause
product damage.

Do not use this product with any device that may have a serious •
impact in the event this product fails.
When you no longer need to use this product, be sure to dispose of it •
in accordance with the local ordinances and laws of your area.

Batteries



CAUTION

Use AAA alkaline batteries, AAA manganese batteries, or
rechargeable AAA nickel hydride batteries with this product.

If this product will be unused for a long period of time, remove the
batteries to avoid battery leakage and failure.

Cleaning the Keyboard



If the product becomes dirty, wipe it with a soft, dry cloth.

Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may
affect the material quality and colour of the product.

Part Names

Installing/Replacing the Batteries

Before using this product, install two AAA batteries in the keyboard.

Remove the battery
compartment cover.

Insert the batteries.

Basic Instructions

Open the keyboard.

Before using this product for the first time, you
must install the batteries. Refer to “Installing/
Replacing the Batteries” for detailed instructions.

Turn on the keyboard.

Power Switch

Slide the power switch to the ON position.

The connection indicator lamp lights up
green for about 3 seconds.

Enter text from the keyboard.

Make sure that the polarity is correct.•
Do not mix different types of batteries or use old batteries •
with new batteries to avoid battery leakage and failure.

Install the battery

compartment cover.

Turning on the Keyboard

Turn on the keyboard to use it.

Slide the power switch to the ON position.
The connection indicator lamp lights up green for
about 3 seconds.

When not using the product, turn the keyboard off to
save battery power.
Slide the power switch to the OFF position.

Pair the keyboard.

Connect button

Press the Connect button to pair this product with the
connected device.

For detailed instructions on the pairing
procedure, refer to “Pairing the Keyboard
with a Connected Device”.

To use this product, the connected device
must support the Bluetooth HID profile or
have a Bluetooth adapter that supports the
HID profile connected.

Mute

Stops system sound output.
Press the key again to cancel mute.

Volume

Decreases the system volume.

* When a program such as iTunes is active

Enable to adjust the system volume or operate iTunes, etc by pressing the [F1] to [F6] key while pressing down the

key.

Function key

Volume

Increases the system volume.

Playback/Pause

Plays media such as music.
Pressing this key during playback stops
playback temporarily. *

To previous track

Press this key to skip to the previous track.*

※

To next track

Press this key to skip to the next track.*

Using the roll-up strap

When not using this product, you can roll it up and tie it with the roll-up strap
for easy storage.
It is also convenient for carry and transport.

Roll it up with the keyboard side facing up.

Tie it with the roll-up strap.

Press [Command] key + Space bar to switch the
character input mode.

Flashes green when the keyboard is in a pairing standby state.•
Indicates when to replace the batteries. •
Lights red when the remaining battery level gets low during use.

Connection indicator lamp

Power switchConnect button

While the key is held down, the func­tions indicated in the

can be used.

key (Function key)

Inserts a space.•
Converts characters when using two-•
byte fonts.

Space bar

Switches the character input mode for the
iPad/iPhone/iPod touch to

[Eng] English input or
[Jpn] Japanese input.

Jpn, Eng key

Works the same as the Home button on an
iPad, iPhone, or iPod touch.

Home key

Battery compartment cover (rear)

Shows/Hides the software keyboard in the
character input mode for the iPad/iPhone/
iPod touch.

Software keyboard key

- 2 -

Basic Specifications

Product name Bluetooth® Silicone Keyboard

Article No. TK-FBS035E series

Supported devices iPad2, iPad, iPhone4/4S, 4G iPod touch

•
iPhone 3GS and 3G iPod touch (32GB/64GB) with

•
software updated to iOS4.0 or later

* Cannot be used with iPhone 3G or first and second

generation iPod touch.
Mac OS X(10.5-10.5.8, 10.6-10.6.8, 10.7-10.7.2)

•
Android devices that support Bluetooth

•

®

HID

profile

* For information on supported models, see the

official ELECOM website.

Connection method Bluetooth

®

wireless

Compliant standard Bluetooth

®

3.0 Class 2

Profile HID (Human Interface Device)

Radio frequency 2.4 GHz bandwidth

Radio wave method GFSK modulation

Radio wave outreach Non-magnetic substance (e.g. wooden desk): Approx.

10 m
Magnetic substance (e.g. metal desk): Approx. 3 m
* Values indicated are those obtained by ELECOM and

are not guaranteed.

No. of keys 88 (English layout)

Key type Silicone keypad

Key pitch 13.0 mm

Key stroke 2.0 mm

Dimensions 275.5 (W) x 96.0 (D) x 15.1 (H) mm

Weight Approx. 105g (Batteries Not Included)

Operating
temperature/humidity

5 to 40°C, 90% RH max. (no condensation)

Storing temperature/
humidity

-10 to 60°C, 90% RH max. (no condensation)

Batteries x2 AAA alkaline/manganese/rechargeable nickel

hydride battery

Operating time Measure of operating time when alkaline battery is

used
Approx. 3 months
* Values indicated are those obtained by ELECOM

and are not guaranteed.

Pairing the Keyboard with a Connected Device

Using iPhone/iPad/iPod touch

To connect this product to a connected device using Bluetooth, you need to pair the product with the connected device.

Pairing involves registering Bluetooth devices (in this case, this product and iPhone/iPad/iPod touch) with each other, and authorizing a connection •
with a registered device.
This product supports pairing registration of multiple Bluetooth devices (up to 3 devices). Repeat the pairing process in the same way to add the 2nd •
to 3rd devices.
* If another device is registered after 3 devices have been already registered, the settings for the first registered device will be deleted.

The instructions below are based on iPhone 4 (iOS 5.01) user interface.

*
The procedure is the same for other models.
When using iPhone 3GS or 3G iPod touch, you must update the software to

*
iOS 4.0 or later.
For instructions on updating software, refer to iPhone 3GS or 3G iPod
touch manual.
This product cannot be used with iPhone 3G or with first and second

*
generation iPod touch.

Touch [Settings].

Touch [General].

Touch [Bluetooth].

While the device is searching for
other devices, press the Connect
but to n o n t his pr odu ct for 2
seconds.

The Connection indicator lamp flashes
green during the pairing procedure and
turns off when the procedure is complete
(step

).

Touch [ELECOM TK-FBS035
series Not Paired].

If iPhone 3GS or iPod touch
cannot find the keyboard, check
that the software has been
updated to iOS 4.0 or later.

Use this product to enter the PIN
code that displays on the screen.

Enter the PIN code using the keyboard
numerical keys, and press the “Enter” key.

If the PIN code was not entered
correctly, the screen shown to the
right will display.
Touch “OK”, and repeat from step

.

Connect button

Pairing is completed successfully
when [ELECON TK-FBS035 series]
is shown as [Connected].

You can now use the keyboard.

If connection fails

Connection may fail depending on iPad/iPhone/iPod touch status.
In such cases, re-connect by following the procedure below.

Touch [Settings].

Touch [General].

Touch [Bluetooth].

Touch [ELECOM TK-FBS035
series Not Connected].

Reconnection is completed
successfully when [ELECOM
TK-FBS035 series] is shown
as [Connected].

Troubleshooting

When the keyboard does not work correctly

When text cannot be entered or keyboard does not



work/is unstable

 When key input does not occur for approximately 2 hours, this product

will automatically switch to power save mode.
It will return to normal mode once any key is pressed.
Enter characters after this has occurred.
 Check that this product and the connected device’s Bluetooth function

or Bluetooth adapter are turned on.
 Check pairing status to ensure that this product is paired correctly with

the connected device and that pairing has not been cancelled.

The Connection indicator lamp flashes green during the pairing •
procedure and turns off when the procedure is complete.
For details on the PC’s Bluetooth function and Bluetooth adapter, •
refer to the relevant instruction manuals. Alternatively, contact the
manufacturer.

 The connected device and the keyboard are too far apart or there is a

possibility that the connected device is facing in a direction from which

it cannot receive radio signals.
Adjust the position of the

connected device.
The operable range of this product

is the area within a circle with a

radius of 10 m from the connected

device. Depending on the usage

environment, the keyboard may

not operate even when it is

within approximately 10 m of the

connected device. In such cases,

move the keyboard closer to the

connected device until operation

stabilizes.

 When using this product on a metallic surface such as a steel desk,

radio wave outreach may be shortened. In such cases, move the

keyboard closer to the connected device until keyboard operation

stabilizes.
 Interference may occur if multiple units of this product are used

together or if this product is used with other wireless devices. In this

case, change the channel of other wireless devices.
 Operation becomes unstable when battery power is low. Refer to

“Installing/Replacing the Batteries” on the reverse of this sheet, and

replace the batteries as soon as possible.

The alkaline batteries supplied with this product are for checking •
product operation. These batteries may discharge and drain during
storing and shipping.
When the remaining battery level gets low, the Connection indicator •
lamp lights red.

* When not using the product, turn the keyboard off to save battery

power.

Approx. 10 m

When using Mac OS X

When using Mac OS 10.7.x, 10.6.x



From the Bluetooth menu,
click [Set Up Bluetooth
Device...].

The Bluetooth Setup Assistant is
displayed.

If the Bluetooth menu is not displayed, from the Apple menu,
click [System Preferences]. When the [System Preferences]
window is displayed, click [Bluetooth], and then click

on

the [Bluetooth] window.

Press the Connect button on this product for 2
seconds.

The Connection indicator lamp flashes green
during the pairing procedure and turns off
when the procedure is complete (step

).

If a message saying that registration failed is displayed,
check that this product is turned on, and then click

.

Select [ELECOM TK­FBS035 series], and
click

.

The passkey is displayed on
the screen.

Use this product to
enter the passkey that
displays on the screen.

Enter the passkey using the
keyboard numerical keys, and
press the “Enter” key.

Click .

When registration is completed
successfully, [ELECOM
TK-FBS035 series] appears in
the [Bluetooth] window.

If the keyboard setup
assistant cannot detect the
keyboard, click
and select [ANSI] from the
list of keyboards that is
displayed on the screen.
Then click

.

You can now use the keyboard.

Connect button

When using Mac OS 10.5.x



From the Bluetooth menu,
click [Set up Bluetooth
Device].

The Bluetooth Setup Assistant is
displayed.

If the Bluetooth menu is not displayed, from the Apple menu,
click [System Preferences]. When the [System Preferences]
window is displayed, click [Bluetooth], and then click

on

the [Bluetooth] window.

Click .

Select [Keyboard], and
click

.

The system starts searching
for Bluetooth devices to add.

Press the Connect button on this product for 2
seconds.

The Connection indicator lamp flashes green
during the pairing procedure and turns off
when the procedure is complete (step

).

If a message saying that registration failed is displayed,
check that this product is turned on, and then click

.

Select [TK-FBS035
series], and click

The passkey is displayed on
the screen.

Use this product to
enter the passkey that
displays on the screen.

Enter the passkey using the
keyboard numerical keys, and
press the “Enter” key.

Click .

When registration is completed
successfully, [ELECOM
TK-FBS035 series] appears in
the [Bluetooth] window.

If the keyboard setup
assistant cannot detect the
keyboard, click
and select [ANSI] from the
list of keyboards that is
displayed on the screen.
Then click

.

You can now use the keyboard.

Connect button

Bluetooth® Silicone Keyboard

TK-FBS035E
User's manual

1st edition, February 20, 2012

ELECOM Co., Ltd

This manual is copyright of ELECOM Co., Ltd.

•

Unauthorised copying and/or reproducing of all or part of this manual is

•

prohibited.
The specifications and appearance of t his product may be changed

•

without prior notice for product improvement purposes.
ELECOM Co., Ltd. shall bear no eresponsibility for any and all affects

•

resulting from the use of this product regardless of the above reasons.
Export or service transaction permission under the Foreign Exchange

•

and Foreign Trade Control Law is required in order to export this product
or parts of this product that constitute strategic materials or services.
iPad, iPhone, iPod touch, Mac, Mac OS, and Macintosh are trademarks

•

of Apple Inc.
The Bluetooth word mark and Bluetooth logo are all trademarks that

•

are owned by the Bluetooth SIG and licensed out for use to ELECOM
Co., Ltd. that are incorporating Bluetooth wireless technology into their
products
Company names, product names, and other names in this manual are

•

generally trademarks or registered trademarks.

©2012 ELECOM Co., Ltd. All Rights Reserved.

ELECOM CO., LTD.

URL: http://www.elecom.co.jp/global/
[e-mail]

宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704 号
電話 : 86-21-33680011
FAX : [phone]
URL : http://www.elecom-china.com/

ELECOM Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862,
Korea
TEL : [phone]
FAX : [phone]
URL : www.elecom.co.kr
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)
TEL: [phone]
FAX: [phone]
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL: [phone]
e-mail: [e-mail]
URL: http://www.elecom-india.com/
ednet gmbh
Oberliederbacher Weg 36 D-65843 Sulzbach/Taunus, Germany
Telefon:[phone]
Telefax:[phone]
URL : http://www.ednet-gmbh.de/