Elecom M-PGDL Series User Manual

Page 1
Wireless Laser Mouse with Micro-Receiver
“Micro receiver”
The micro receiver does not hinder the operation while it is attached to a notebook PC.
M-PGDL Series
User's Manual
Thank you for purchasing the ELECOM M-PGDL Series wireless laser mouse with micro-receiver. This manual describes the operating instructions and safety precautions for using the M-PGDL Serie s. Ensure t hat you ha ve read this manual before using the product. After reading this manual, store it somewhere safe for future reference. * Except in certain cases, the M-PGDL Series is referred to as "this product" in this manual.
Safety Precautions
Meaning of symbols
Failure to observe precautions
WARNING
CAUTION
Prohibited action
Mandatory action
Situation that needs attention
Notes and reference information
Information that is handy to know
Ob ser ve th es e pre cau tio ns ca ref ull y to av oid personal injury, damage, re, and other problems.
If a foreign obje ct (water, metal chip, etc.) enters the product, immediately stop using the product and disconn ect t he rece iver unit from the PC, and remove the battery from the mouse. If you continue to use the product under these conditions, it may cause a re or electric shock.
If an abnormality is found with this product (emission of heat, smoke or abnormal smell from the product), immediately stop using the product, shutdow n the PC, and af ter thoroughly checking that heat from the product will not c ause bur ns, disco nnect the receiver unit from the PC, and remove the battery from the mouse. After doing this, contact the retailer from whom y ou purchased the product.
Do not drop or hit this product. If this product is damaged, immediately stop using the product and disconnect the receiver unit from the PC, and remove the battery from the mouse. If you continu e to u se the product under these conditions, it may cause a fire or electric shock.
may result in serious personal injury or death due to fire, electric shock, or other causes.
Failure to observe precautions may result in personal injury due to electric shock or other ca us es, and may dam ag e other equipment.
WARNING
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a re, electric shock or product damage.
Do not put this product in re, as the product may burst, resulting in a re or injury.
Do not connect or disconnect the receiver unit with a wet hand, modify the receiver unit or bend it forcibly, as this may cause a re or electric shock.
Do not place this product in any of the following environments:
This product does not have a waterpro of structu re. Use and store this product in a place w here the prod uct body will not b e splashed with water or other liquid. Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
Wh en you n o lon ger n eed t o use th is pr od uc t an d th e ba tt er y, b e su re t o dispose of it in accordance w ith the local ordinances and laws of your area.
Batteries
Use AAA alkaline batteries, AAA manganese batteries, or AAA nickel hydride batteries with this product.
If this product will be unused for a long period of time, remove the battery to avoid battery leakage and failure.
WARNING
CAUTION
In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.) In a moist place or a place where condensation may occur In an uneven place or a place exposed to vibration In a place where a magnetic field is generated (near a magnet, etc.) In a dusty place
CAUTION
Cleaning the Mouse
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may aect the material quality and colour of the product.
Cautions for Wireless Equipment
Before using this product, check that there are no other “radio
stations”* operating nearby. If electromagne tic inter ference occurs be tween th is produc t
and o ther “rad io stat ions”, move t his pro duct to an othe r location or stop using this product.
* Other “radio stations” refer to industrial, scientific and medical devices
using the 2.4 GHz band like this product, other radio stations of this type, licensed radio station premises for mobile object identification system that is used in factory produc tion lines, certain non-licensed low power radio stations and amateur radio stations.
WARNING
Do not use this product with a device that may have a
serious function or inuence. There are rare cases where an external radio wave at the same frequency or the radio wave emitted from a mobile phone causes this product to malfunction, slow down, or fail to operate. Do not use this product in a hospital or other locations
where the use of radio waves is prohibited. The radio waves of this product may aect electronic and medical devices (e.g. pacemaker). The use of a wireless mouse in an aircraft is prohibited by
aviation law because doing so may interfere with ight safety. Turn off the power of the mouse body before boarding an aircraft and do not use it in the aircraft.
* ELE COM is no t lia ble fo r any ac cide nt or so cia l
damages incurred by the failure of this product.
Cautions for Laser Mouse
Though this product complies with the IEC60825-1 Class 1 laser safety standard to ensure safety, pay special attention to the following before use.
(1) Never obse rve the laser beam by using an optic al measure
such as a microscope or magnier or view the la ser with the naked eye for a long period of time. Doing s o may have an adverse eect on the eye. (Some laser beams cannot be seen with the naked eye.)
(2) Never aim the rear surface of the mouse at a person’s eyes, as
this is very dangerous. (3) The laser sensor may not work on glass or mirrored surfaces. (4) Do not use this product for any application other than as a PC
mouse. (5) If this pr oduc t i s s ubjec ted to tem pera tures be yond it s
specications, turn of the PC, and do not use the product until
the temperature returns to the operable range. (6) If this product is not operating normally, turn of the PC.
Package Contents
This product's packaging contains the items listed below. Before using the produc t, che ck tha t all items are present. We ma ke every eort to ensure t hat all products are packaged correctly. Howe ver, in the event th at an i tem is missi ng or d amage d, contact the retailer from whom you purchased the product.
Mouse x1
Receiver unit x1
AAA alkaline battery x1
Carry bag x1
User’s Manual x1
Part Names
Mouse
Receiver unit
Tilt wheel
The tilt wheel can be t urned back and f orward with your nger or pressed like a button to operate the PC. Til ting th e t ilt whe el to the ri ght or lef t l ets you s croll horizontally.
You must download and install ELECOM MouseAs sistant 2 for Win dows from our company's web site to use the horizontal scrolling function with Windows.
Using the horizontal scrolling and button allocation functions (See reverse)
Preparation before Use
Installing·Replacing the Battery
Before using this product, install one AAA battery in the mouse body.
Remove the battery cover.
Press part  fi rmly to the right to r emove th e cover easily.
Insert the battery.
Make sure that the
polarity is correct. The positive terminal should be closest to the back of the mouse.
Install the battery cover.
Turning On and O the Mouse
Turning on the mouse
When using this product, turn the mouse body power on. Slide the power switch to the ON position The remaining battery level indicator lamp is illuminated in red for a certain period. * Flashes continuously when battery level gets low.
Turning off the mouse
When not using this product, turn the mouse body o to save battery power. Slide the power switch to the OFF position.
Restoring from sleep state
Click the right mouse button.
To reduce battery drain, the mouse enters sleep mode automatically if it is left without being operated for a certain period of time with the power or switch turned on.
- 1 -
Right button
Used for right-click operation.
Left button
Used for left-click operation.
Remaining battery level indicator lamp
Indicates when to replace the batteries. * When a batter y has been inser ted, if there are suffici ent
remai ning b attery levels, it will illuminat e in green for a certain period of time, and if low, it will ash continuously. If the remaining battery level becomes low during use, it will ash continuously in green for a certain period of time.
Battery cover
This cover is removed to install batteries.
Battery housing
Batteries are inserted here.
Receiver unit housing
Used to store the receiver unit.
Power switch
Used to turn the mouse body on and o.
Laser sensor
When the mouse body is moved, this sensor detects mouse movement. * Avoid looking directly at the light of the sensor as doing so
may cause eye damage.
Maintenance switch
For factory use only.
USB connector (Male)
Connected to a PC USB port.
When using Windows®
S
S
Check USB ports
tep
1
Check the USB port on your computer.
USB port
Any USB port may be used.
This product can be connected to a USB hub. However,
it may not work depending on the power supply capability of the USB hub.
Installing the Receiver Unit
tep
2
Activate the PC
If Windows® prompts you to choose an account (a user
name) when it starts up, be sure to log on using an administrator account. Wait until Windows® has started up completely.
Insert the receiver unit into the USB port of the PC
USB port
Carefully check the orientation of the connector
and the place where you will connect the receiver unit. If you feel strong resistance when inserting
the receiver unit, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury. Do not touch the USB connector terminals.
The mouse driver is installed automatically.
Insert here.
Receiver unit
S
Checking wheel operation
tep
3
Che ck that t he mous e s crol ls up and do wn corre ctl y i n Windows® Internet Explorer.
From the [Start] menu, select [All Programs], and
then [Internet Explorer].
Internet Explorer will launch.
Display your favourite web site in Internet Explorer
and change the size of the window so that the vertical scrollbar appears.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the tilt wheel back and forth.
The mouse is operating normally if the screen moves up and down as you scroll the tilt wheel.
In applications that do not support scrolling,
the screen will not move when you scroll the tilt wheel.
In order to u se th is pr oduct's horiz ontal scrolli ng funct ion, y ou mus t downl oad an d inst all EL ECOM MouseAssistant 2 for Windows from our company's web site.
Proce ed to "Usi ng the ho rizon tal scr olli ng and button allocation functions" on the reverse of this sheet.
Inserting and Taking Out the Receiver Unit
Inserting the receiver unit
Remove the battery
cover.
Place the receiver
unit into the receiver unit housing.
Install the battery cover.
Taking out the receiver unit
Remove the battery cover.
Take the receiver unit
out of the receiver unit housing.
Install the battery cover.
When using Mac OS X®
S
S
S
Check USB ports
tep
1
Check the USB port on your computer.
USB port
Any USB port may be used.
This product can be connected to a USB hub. However,
it may not work depending on the power supply capability of the USB hub.
Installing the Receiver Unit
tep
2
Activate the Macintosh.
Wait until Mac OS X has started up completely.
Insert the receiver unit into a USB port on your
Macintosh.
Receiver unit
Carefully check the orientation of the
connector and the place where you will connect the receiver unit. If you feel strong resistance when inserting
the receiver unit, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury. Do not touch the USB connector terminals.
The mouse driver is installed automatically.
Checking wheel operation
tep
3
Check that the vertic al and horizontal scrolling func tions are working correctly in Safari.
Insert here.
USB port
Click the Safari icon in the Dock.
Safari will launch.
If Safari is not in the Dock, double­click the Safari icon in the Applications folder.
Display your favourite web site in Safari and
change the size of the window so that the vertical and horizontal scrollbars appear.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the tilt wheel back and forth.
The mouse is operating normally if the screen moves up and down as you scroll the tilt wheel.
Move the tilt wheel from side to side.
The mouse is operating normally if the screen moves from side to side as you move the tilt wheel.
In applications that do not support scrolling, the
screen will not move when you scroll the tilt wheel. In order to use this product's button allocation
function with a Mac, you must download and install ELECOM MouseAssistant 2 for Mac OS X from our company's web site.
Proceed t o "Using the horizontal scrolling and button alloc ation f unctions" on the re verse o f this sheet.
Page 2
Using the horizontal scrolling and button allocation functions
廢電池請回收
To use the horizontal scrolling function with the tilt wheel of this product, you need to install the ELECOM MouseAssistant 2 that can be downloaded from the ELECOM website.
Obtaining ELECOM MouseAssistant 2
Acces s th e ELE COM we bsite using the follo wing URL and download the latest driver.
http://www.elecom.co.jp/global/ download/utility/mouse_assistant/
Installing the ELECOM MouseAssistant 2 for Windows
Before installation....
Keep the mouse installed. For details, see "Step 2
- Installing the Receiver Unit" on the front of this sheet. If mouse utility software from ELECOM or another
company is installed, uninstall it. Login with a user account that has administrative
privileges. It is recommended that all programs (application
software) be terminated.
* Though the subsequent screens of the installation program
dier depending on the OS, the procedure is the same.
Double-click the downloaded "mouse_
driver_xxxx(.exe)".
* The le name may be dierent depending
on the version of the driver.
The installer is activated.
When the "user account control" screen is displayed, click [Permit] or [Continue].
Click .
If other mouse utilities have been installed,
click If a previous version of MouseAssistant has been
installed, follow the instructions on the screen to uninstall it.
Click .
Click .
Click .
Installation starts.
to uninstall them.
Click .
After installation is complete, click to
restart the PC.
Now, the installation of the ELECOM M ouseAssistant 2 for Windows is complete.
After restart, mouse functions can be set. R ight-click
the icon in the task tray or notication area and select [Properties].
If the icon is displayed in the Notification Area in
*
Windows® 7, click it and then right click the icon and then click the [Properties].
For the setting method, see the Help le.
Installing the ELECOM MouseAssistant 2 for Macintosh
Before installation....
Keep the mouse installed. For details, see “Step 2
- Installing the Receiver Unit” on the front of this sheet. If mouse utility software from ELECOM or another
company is installed, uninstall it. Login with a user account that has administrative
privileges. It is recommended that all programs (application
software) be terminated.
Double-click the downloaded
"ELECOM_Mouse_Installer_ X.X.X.X.dmg".
The disk image is mounted on the desktop and a window is displayed.
* Th e fi le n ame may be differe nt depend ing on the
version of the driver.
Double-click the "ELECOM_Mouse_Installer_
x.x.x.x" that has been displayed.
The installer is activated.
Click .
If “MouseAssistant” has been installed, click
and uninstall.
Click .
Click .
Enter a user name
and password with administrative privileges and click
Click .
File copying starts.
After installation is complete, click to
restart the Macintosh.
Now, the installation of the EL ECOM MouseAssistant 2 for Macintosh is complete.
After restart, mouse functions can be set. Clicking the• icon registered in the Dock causes the utilit ies to start. (The icon is only registered in the Dock for the user who installed the software. If you are not the user who installed the software, click [Applications] -> [Utilities] and double-click "ELECOM_Mouse_Util". For the setting method, see the help le.
Troubleshooting
When the product appears to be malfunctioning
When the mouse pointer on the screen does not
move, or moves unstably, when the mouse is moved
It is possible that the re ectivity o f the s urface on which
this produc t is being used is no t suit able f or an optica l
mouse.
When using this product on a metallic surface such as a
steel desk, radio wave outreach may be shortened. In such
cases , move the receiver unit closer to the mouse until
mouse operation stabilises.
It is possible that the receiver unit is not connected correctly
to the USB port. Disconnect the receiver unit from the USB
port and reconnect it.
The rece iver un it and the mouse body are too far a part
or there is a possibilit y that the receiver unit is facing in a
direction from which it cannot receive radio signals.
Adjust the position
of the receiver unit.
The operable range
of this product is the
area within a circle
with a radius of 10 m
.
from the receiver unit.
Depending on the
usage environment,
the mouse may not
operate even when it is within approximately 10 m of the
receiver unit. I n such cases, move the mouse closer to the
receiver unit until operation stabilises.
Interference may occur if multiple units of this product are
used together or if this product is used with other wireless
devices. In this case, change the channel of other wireless
devices.
(Multiple units of this product have an automatic channel
avoidance function.)
Operation becomes unstable when batter y power is low. See
"Installing·Replacing the Battery" on the reverse of this sheet,
and replace the batteries as soon as possible.
The alkal ine b atterie s sup plied with this produc t are
for check ing p roduct operat ion. Th ese b atteries may
discharge and drain during storing and shipping.
* Whe n not using the mouse, turn it of f to save battery
power.
It is possible that the standard Windows mouse driver did
not install correctly and that this product is detected as
an unknown device by Windows®. This product is usually
detected as a USB human inter face device. If it is detected as
an unknown device, see "Removing an unknown device," and
after removing the device from Device Manager, repeat "Step
2 - Installing the Receiver Unit" on the front of this sheet.
If you have installed drivers and settings utilities produced by
the original manufacturer for a previous mouse, uninstall them
rst. This product may not operate correctly if a driver made
by another company is installed. See the instruction manual
that was supplied with your previous mouse for uninstall
instructions.
It is poss ible t hat t he dr iver i s con flicting with anot her
driver such as that for a laptop touch pad. To use this
product correctly, you must delete the touc h pad driver.
However, if you delete this driver, you may not be able to
use the touch pad or touch pad functions. Contact the PC
manufacturer for more details.
The wheel moves, but the mouse cursor does not
In cert ain appl ications that do not s upport the scrol ling
function, the mouse cursor will not move when you move
the wheel.
Approximately 10 m
Receiver unit
Removing an unknown device
If the standard Windows mouse driver did not install correctly
and this product is detected as an unknown device, remove the
unknown device from Device Manager, and then repeat "Step 2 -
Installing the Receiver Unit" on the front of this sheet.
If there are multiple unknown devices, before
removing a device, check that it is actually this product. Disconnect the receiver unit and check which unknown device disappears. The device that disappears is this product. If the unknown device does not disappear even
after you have deleted the driver following the instructions below, it is possible that there is something wrong with the PC. Contact the PC manufacturer.
With the receiver unit connected to the PC, follow the procedure below to remove the unknown device. * Be sure to log on using an administrator account when
Windows starts up.
* S cree n disp lay ma y diff er dep endi ng on op erat ing
system, but the procedure remains the same.
Display Device Manager.
Windows® 7 and Windows Vista®
1. From the [Start] menu, right-click [Computer].
2. Click [Properties].
3. Click [Device Manager].
Windows® XP
1. From the [Start] menu, right-click [My Computer].
2. Click [Properties].
3. Cl ick the [Har dware ]
tab.
4. Click
.
The Device Manager window appears. Right-click
the unknown device, and click [Uninstall].
Click .
Disconnect the receiver
unit and restart the PC.
Repeat the procedure from "Step 2 - Installing the
Receiver Unit" on the front of this sheet.
Uninstalling ELECOM MouseAssistant 2 for Windows
To reinstall ELECOM MouseAssistant 2 for Windows, uninstall the existing version of ELECOM MouseAssistant 2 rst.
Login with a user account that has administrative
privileges. It is recommended that all Windows programs
(application software) be terminated.
From the [Start] menu, select [Control Panel].
The Control Panel appears.
Do one of the following:
Windows® 7 and Windows Vista®
Under [Programs], click "Uninstall a program".
Windows® XP
Click "Add or Remove Programs".
Select [ELECOM Mouse Assistant 2] from the list of
installed programs, and then click 7/Windows Vista®) or
*
When the User Account Control screen is displayed in Windows Vista, click the .
(Windows® XP).
(Windows®
* Th ough t he subs eque nt scr eens of t he unin stal lati on
program dier depending on the OS, the procedure is the same.
Click .
The uninstallation begins.
When the software is uninstalled, click
and then restart the PC.
This completes the unistallation process.
Uninstalling ELECOM MouseAssistant 2 for Mac OS X
To reinstall ELECOM MouseAssistant 2 for Mac OS X, uninstall the existing version of ELECOM MouseAssistant 2 rst.
Login with a user account that has administrative
privileges. It is recommended that all programs (application
software) be terminated.
Delete the icon that is registered in the Dock.
To remove icons from the Dock, the "E nable acc ess for as sist ive dev ices" c heck box in Unive rsal Access under System Prefer ences must be selected.
Double-click [ELECOM_Uninstall]
in the utilities folder in the Finder application folder.
Click .
Type an administrator username and password,
and then click
.
When the software is uninstalled, click and
then restart your Mac.
This completes the unistallation process.
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
宜麗客(上海)貿易有限公司 上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704号 電話 : 86-21-33680011 FAX : 86-21-64271706 URL : http://www.elecom-china.com/
ELECOM (SHANGHAI) TRADING CO. , LTD. Rm 704 , Feidiao International Bldg , 1065 ZhaoJiaBang Rd , Shanghai , China 200030 TEL : 86-21-33680011 FAX : 86-21-64271706 URL : http://www.elecom-china.com/
Elecom Korea Co., Ltd. 5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea TEL : 1588-9514 FAX : (02)3472-5533 URL : www.elecom.co.kr
Basic specications
Product name Wireless Laser Mouse with Micro-Receiver
Article No. M-PGDL Series
OS Windows 7, Windows Vista (up to SP2),
Resolution (dpi) 800
Interface USB
Radio frequency 2.4 GHz bandwidth
Radio wave method DS-SS modulation
Radio wave outreach Non-m agneti c s ubstan ce ( e.g. woode n
Mouse body dimensions 50.0 (W) x 90.0 (D) x 32.0 (H) mm
Receiver unit dimensions 14.5 (W) x 19.0 (D) x 6.5 (H) mm
Weight of mouse body Approx. 50 g (not including batteries)
Weight of receiver unit Approx. 1 g
Operating temperature/ humidity
Storing temperature/ humidity
Batteries AAA alkaline battery, AAA manganese
Operating time Measure of the operating time when an AAA
당해 무선설비는 운용 중 전파혼신 가능성이 있음 .
이 기기는 가정용으로 전자파적합등록을 한 기기로서
주거지역에서는 물론 모든 지역에서 사용할 수 있습니다 .
低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使 用者均不得擅自變更頻率、加大功率或變更原設計之特性及功 能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信; 經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續 使用。 前項合法通信,指依電信規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射 性電機設備之干擾。
Wireless Laser Mouse with Micro-Receiver
This manual is copyright of ELECOM Co., Ltd. Unauthorised copying and/or reproducing of all or part of this
manual is prohibited.
The specifications and appearance of this product may be
changed without prior notice for product improvement purposes.
ELECOM Co., Ltd. shall bear no responsibility for any and all
affects resulting from the use of this product regardless of the above reasons.
Export or service transaction permission under the Foreign
Exchange and Foreign Trade Control Law is required in order to export this product or parts of this product that constitute strategic materials or services.
Windows and the Windows logo are trademarks of the
Microsoft group of companies.
Mac, Mac OS, and Macintosh are registered trademarks
or trademarks of Apple Inc., in the United States
Comp any n ames, produ ct n ames, and other name s
in th is manual are generally trademarks or registere d trademarks.
Windows XP (SP2 to SP3) Mac OS X (10.5 to 10.5.8, 10.6 to 10.6.4)
desk): Approx. 10 m Magnetic substance (e.g. metal desk): Approx. 3 m * Test values in the ELECOM environment
5 to 40°C, 90% RH max. (no condensation)
-10 to 60°C, 90% RH max. (no condensation)
battery, AAA nickel hydride battery
alkaline battery is used Continuous operating time: Approx. 60 hours Continuous standby time: Approx. 75 days Estimated serviceable time: Approx. 27 days (when the PC is operated for eight hours a day and 25% of the PC operation is assigned to mouse operation)
B 급 기기 ( 가정용 정보통신기기 )
M-PGDL Series
3rd edition, November 20, 2009
User's Manual
ELECOM Co., Ltd.
2009 ELECOM Co., Ltd. All Rights Reserved.
©
- 2 -
Loading...