Elecom M-BL2DB Series, M-PG3DL series, Kasane M-NE3DL Series User Manual

- 1 -

When you no longer need to use this product and

the battery, be sure to dispose of it in accordance with the local ordinances and laws of your area. If this product is malfunctioning, do not use it with

any equipment which has an important function or could cause a serious negative inuence. If this product is used on a transparent surface

such as glass or a highly reec tive surface such as a mirror, the optical sensor will not function correctly and mouse cursor movement will become unstable.

Batteries



CAUTION

For this product, use AAA alkaline batteries, AAA manganese batteries or rechargeable AAA nickel hydride batteries.

If this product will be unused for a long period of time, remove the battery to avoid battery leakage and failure.

Cleaning the Mouse



If the product body becomes dirty, wipe it with a soft, dry cloth.

Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may aect the material quality and colour of t he product.

Cautions for Wireless Equipment

This product is wireless equipment using the entire range of the

2.4 GHz band and it is possible to avoid the band of mobile object identication systems. GFSK is used for the radio wave method. The interference distance is 10 m. The 2.4 GHz band is also used by medical equipment, Bluetooth, and wireless LAN equipment conforming to the IEEE802.11b/11g/11n standard.

Before using this product, check that there are no other “radio

•

stations”* operating nearby. If electromagnetic interference occurs between this product and

•

other “radio stations”, move this product to another location or stop using this product.

* Other “radio stations” refer to industrial, scientific and medical

devices using the 2.4 GHz band like this product, other radio stations of this type, licensed radio station premises for mobile object identication system that is used in factory production lines, certain non-licensed low power radio stations and amateur radio stations.

WARNING

Do not use this product with a device that may have a

●

serious function or inuence. There are rare cases where an external radio wave at the same frequency or the radio wave emitted from a mobile phone causes this product to malfunction, slow down, or fail to operate. Do not use this product in a hospital or other locations

●

where the use of radio waves is prohibited. The radio waves of this product may aect electronic and medical devices (e.g. pacemaker). The use of a wireless mouse in an aircraft is prohibited by

●

aviation law because doing so may inter fere with ight safety. Turn off the power of the mouse body before boarding an aircraft and do not use it in the aircraft.

* ELECOM is no t liab le for a ny acc ide nt or so cia l

damages incurred by the failure of this product.

Package Contents

This product’s packaging contains the items listed below. Before using the pr oduct, check that all i tems a re pre sent. We make every eort to ensu re that all products are pa ckaged correc tly. Howeve r, in th e ev ent that an ite m is mi ssing or dam aged, contact the retailer from whom you purchased the product.

Mouse x1

•

Receiver unit x1

•

AAA alkaline battery x2

•

User’s Manual x1

•

Safety Precautions

Part Names

Installing·Replacing the Battery

Before using this product, install two AAA batteries in the mouse body.

Remove the battery cover.

Insert the batteries.

Make sure that the

polarity is correct.

Install the battery cover

as before.

Replacing the Battery



Remove the battery cover.

Remove the

batteries

using

the battery removal sheet.

Insert the batteries.

Do not mix different

types of batteries or use old batteries with new batteries to avoid battery leakage and failure.

Install the battery cover as before.



Turning On and O the Mouse

Turning on the mouse



When using this product, turn the mouse body power on. Slide the power switch to the ON position. The remaining battery level indicator lamp is illuminated in red for a certain period. * When the remaining batter y level is low, the remaining battery

level indicator lamp is ashed in red for a certain period.

Turning off the mouse



When not using this product, turn the mouse body o to save battery power. Slide the power switch to the OFF position.

Restoring from sleep state



Click the right mouse button.

To reduce battery drain, the mouse enters sleep mode automatically if it is left without being operated for a certain period of time with the power or switch turned on.

Inserting and Taking Out the Receiver Unit

Inserting the receiver unit



Place the receiver unit into the

receiver unit housing.

Taking out the receiver unit



Take the receiver unit out of the

receiver unit housing.

Preparation before Use

tep

Check USB ports

Check the USB port on your computer.

USB port

Any USB port may be used.

This product can be connected to a USB hub. However,

it may not work depending on the power supply capability of the USB hub.

tep

Installing the Receiver Unit

Activate the PC

If Windows® prompts you to choose an account (a user

●

name) when it star ts up, be sure to log on using an administrator account. Wait until Windows® has started up completely.

●

Insert the receiver unit into the USB port of the PC

USB port

Receiver unit

Insert here.

Carefully check the orientation of the connec tor

and the place where you will connect the receiver unit. If you feel strong resistance when inserting

the receiver unit, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.

The mouse driver is installed automatically.

tep

Checking wheel operation

Check that the mouse vertical scrolling functions are working correctly in Windows® Internet Explorer.

From the [Start] menu, select [All Programs], and

then [Internet Explorer].

Internet Explorer will launch.

Display your favourite web site in Internet Explorer

and change the size of the window so that the vertical scrollbar appears.

* The sample website used here is the ELECOM homepage.

Scrollbar

Scroll the wheel back and

forth. The mouse is operating normally if the screen moves up and down as you scroll the wheel.

In applications that do not support scrolling, the screen will not move when you scroll the wheel.

Click either of the links on the page to proceed to

the next page.

Operation is normal if pressing the Back button (

) takes you to the previous page and pressing the Forward button (

)takes you to the next page.

In certain applications, the function will not work when you press the Back or Forward buttons.

When using Windows®

Meaning of symbols



WARNING

Failure to observe precautions may result in serious personal injury or death due to fire, electric shock, or other causes.

CAUTION

Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment.

Prohibited action

Mandatory action

Situation that needs attention

Notes and reference information

Information that is handy to know

Obs erv e the se pr eca uti ons care fu lly t o avo id personal injury, damage, re, and other problems.

WARNING

If a foreign object (water, metal chi p, etc.) enters the product, immediately stop using the pro duct and di sconnect the receiver unit from the PC, and remove the batter y from the mouse. If you continue to use the product under these conditions, it may cause a re or electric shock.

If an abnormality is found with this product (emission of heat, smoke or abnormal smell from the product), immediately stop using the prod uct, s hutdown the PC , and after thoroughly checking that heat from the product will not cause burns, disconnect the receiver unit from the PC, and remove the bat tery from th e mous e. Afte r doin g this, co ntact t he reta iler fr om whom you purchased the product.

WARNING

Do not drop or hit this product. If this product is damaged, immediately stop using the product and disconnect the receiver unit from the PC, and remove the battery from the mouse. If you continue t o use the produc t under these conditions, it may cause a fire or electric shock.

Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a re, electric shock or product damage.

Do not put this product in fire, as the product may burst, resulting in a fire or injury.

Do not connect or disconnect the receiver unit with a wet hand, modify the receiver unit or bend it forcibly, as this may cause a re or electric shock.

The receiver unit contains small parts that could be swallowed by a child. Ensure that the unit is stored in an area where it is not accessible to children.

CAUTION

Do not place this product in any of the following environments:

In a car exposed to sunlight, a place

•

exposed to direct sunlight, or a place that becomes hot (around a heater, etc.) In a moist place or a place where conden-

•

sation may occur In an uneven place or a place exposed to

•

vibration In a place where a magnetic field is

•

generated (near a magnet, etc.) In a dusty place

•

This produc t does not h ave a waterproof structure. Use and store th is produc t in a place where th e product body will not be splashed with water or other liquid. Rain, water mist, juice, coffee, steam or sweat may also cause product damage.

Mouse



Receiver unit



Left button

Used for left-click operation.

Right button

Used for right-click operation.

Wheel

The wheel can be turned back and forward with your nger or pressed like a button to operate the PC.

Back button/eForward button

Back button

Performs the back action in a web browser.

Forward button

Performs the forward action in a web browser.

Forward button

Proceeds to the next

browser screen

Back button

Returns to the previous

browser screen

To use the Back and Forward buttons with a Mac, you need to install the ELECOM Mouse Assistant 2 Mac OS X version that can be downloaded from the ELECOM website.

Using the but ton al location funct ions a nd fly ing scroll function (See reverse)

Remaining battery level indicator lamp/ Resolution switch indicator lamp

Indicates when to replace the batteries.

* When a battery has been inserted, if there are sucient

remaining battery levels, it will illuminate in red for a certain period of time. If the remaining battery level becomes low during use, it will ash continuously in red for a certain period of time.

Flashe s w hen the reso lutio n ( mouse cu rsor spee d) is

changed. * Flashes twice when switching from 800 to 1600

Flashes once when switching from 1600 to 800

Optical sensor

Lights blue when the mouse is powered on. When the mouse body is moved, this sensor detects mouse movement.

Avoid looking directly at the light of the sensor as doing so may * cause eye damage.

h

Power switch

Used to turn the mouse body on and o.

i

Resolution switch

Switches the resolution (mouse cursor speed) between 800 and 1600 each time the button is pressed.

j

Receiver unit housing

Used to store the receiver unit.

k

Battery cover

This cover is removed to install batteries.

l

Battery housing

Batteries are inserted here.

m

Battery removal sheet

Used to remove the batteries from the battery housing.

Maintenance switch

For factory use only.

USB connector (Male)

Connected to a PC USB port.

tep

Check USB ports

Check the USB port on your computer.

USB port

Any USB port may be used.

This product can be connected to a USB hub. However,

it may not work depending on the power supply capability of the USB hub.

tep

Installing the Receiver Unit

Activate the Macintosh.

Wait until Mac OS X has started up completely.

●

Insert the receiver unit into a USB port on your

Macintosh.

USB port

Receiver unit

Insert here.

Carefully check the orientation of the

connector and the place where you will connect the receiver unit. If you feel strong resistance when inserting

the receiver unit, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.

The mouse driver is installed automatically.

tep

Checking wheel operation

Check that the mouse vertical scrolling functions are working correctly in Safari.

Click the Safari icon in the Dock.

Safari will launch.

If Safari is not in the Dock, doubleclick the Safari icon in the Applications folder.

Display your favourite web site in Safari and

change the size of the window so that the vertical scrollbars appear.

* The sample website used here is the ELECOM homepage.

Scrollbar

Scroll the wheel back and

forth. The mouse is operating normally if the screen moves up and down as you scroll the wheel.

In applications that do not support scrolling, the

screen will not move when you scroll the wheel. To use the Back and Forward buttons with a Mac,

you need to install the ELECOM Mouse Assistant 2 Mac OS X version that can be downloaded from the ELECOM website.

Proceed to “Using the button allocation functions and flying scroll function” on the reverse of this sheet.

Up and down scrolling operation in MAC OS X 10.7 works in reverse from typical models. This can be changed in the mouse settings screen.

When using Mac OS X

Thank you for purchasing the ELECOM M-BL2DB Series 5-button wireless Blue LED mouse. This manual describes the operating instructions and safety precautions for using the M-BL2DB Series. Ensu re that you have read t his ma nual b efore u sing t he pro duct. After reading this manual, store it somewhere safe for future reference. * Except in certain cases, the M-BL2DB Series is referred to as “this product” in this manual.

5-button wireless Blue LED mouse

M-BL2DB Series

User's Manual

- 2 -

Troubleshooting

With the product connected to the PC, follow the procedure below to remove the unknown device.

* Be sure to log on using an ad ministrator account when

Windows starts up.

* Screen dis play m ay diff er dep end ing on op erat ing

system, but the procedure remains the same.

Display Device Manager.

Windows® 7 and Windows Vista®

●

1. From the [Start] menu, right-click [Computer].

2. Click [Properties].

3. Click [Device Manager].

Windows® XP

●

1. From the [Start] menu, right-click [My Computer].

2. Click [Properties].

3. Click the [Hardware] tab.

4. Click

The Device Manager window appears. Right-click

the unknown device, and click [Uninstall].

Click .

Disconnect the receiver

unit and restart the PC.

Repeat the procedure from "Step 2 - Installing the

Receiver Unit" on the front of this sheet.

Uninstalling ELECOM MouseAssistant 2 for Windows

To reinstall ELECOM MouseAssistant 2 for Windows, uninstall the existing version of ELECOM MouseAssistant 2 rst.

privileges. It is recommended that all Windows programs

(application software) be terminated.

From the [Start] menu, select [Control Panel].

The Control Panel appears.

Do one of the following:

Windows® 7 and Windows Vista®

●

Under [Programs], click "Uninstall a program".

Windows® XP

●

Click "Add or Remove Programs".

Select [ELECOM Mouse Assistant 2] from the list of

installed programs, and then click

(Windows®

7/Windows Vista®) or

(Windows® XP).

When the User Account Control screen is displayed in Windows Vista, click the .

* Thoug h the sub sequ ent sc reen s o f the uni nsta lla tion

program dier depending on the OS, the procedu re is the same.

Click .

The uninstallation begins.

When the software is uninstalled, click

and then restart the PC.

This completes the unistallation process.

Uninstalling ELECOM MouseAssistant 2 for Mac OS X

To reinstall ELECOM MouseAssistant 2 for M ac OS X, uninstall the existing version of ELECOM MouseAssistant 2 rst.

privileges. It is recommended that all programs (application

software) be terminated.

Delete the icon that is registered in the Dock.

To remove ico ns from the D ock, the "Enable acces s f or assi stive d evice s" chec k box in Universal Acces s und er Sys tem P reference s must be selected.

Double-click [ELECOM_Uninstall]

in the utilities folder in the Finder application folder.

Click .

Type an administrator username and password,

and then click

When the software is uninstalled, click and

then restart your Mac.

This completes the unistallation process.

When the product appears to be malfunctioning

When the mouse pointer on the screen does not



move, or moves unstably, when the mouse is moved



It is possible that the reectivity of the surface on which this

product is being used is not suitable for an optical mouse.

Use this product on a mouse pad that is designed for use

with optical mice.



When using t his produc t on a metalli c surfa ce such as a

steel desk, radio wave outreach may be shortened. In such

cases, move t he rec eiver u nit c loser to the mouse unti l

mouse operation stabilises.



It is possible that the receiver unit is not connected correctly

to the USB por t. Disconnect the receiver unit from the USB

port and reconnect it.



The receiver unit and th e mouse body are too far apart

or there is a possibility that the receiver unit is facing in a

direction from which it cannot receive radio signals.

Approximately 10 m

Receiver unit

Adjust the position

of the receiver unit.

The operable range

of this product is the

area within a circle

with a radius of 10 m

from the receiver unit.

Depending on the

usage environment,

the mouse may not

operate even when it is within approximately 10 m of the

receiver unit. In such cases, move the mouse closer to the

receiver unit until operation stabilises.



Interference may occur if multiple units of this product are

used together or if this product is used with other wireless

devices. In this case, change the channel of other wireless

devices.

(Multiple units of this product have an automatic channel

avoidance function.)



Operation becomes unstable when battery power is low. See

“Installing·Replacing the Battery” on the reverse of this sheet,

and replace the batteries as soon as possible.

The al kaline batte ries supplie d wit h thi s pro duct are

•

for ch ecking produc t op eration. These batte ries may

discharge and drain during storing and shipping.

* When no t usin g the mouse, turn it off to save batter y

power.



It is possible that the standard Windows mouse driver did

not install correctly and that this product is detected as

an unknown device by Windows®. This product is usually

detected as a USB human interface device. I f it is detected as

an unknown device, see “Removing an unknown device,” and

after removing the device from Device Manager, repeat “Step

2 - Installing the Receiver Unit” on the front of this sheet.



If you have installed drivers and settings utilities produced by

the original manufacturer for a previous mouse, uninstall them

rst. This product may not operate correctly if a driver made

by another company is installed. See the instruction manual

that was supplied with your previous mouse for uninstall

instructions.



It is possible that the driver is conflic ting with another

driver such as that for a laptop touch pad. To use this

product cor rectly, you must de lete the touch p ad driver.

However, if you delete this driver, you may not be able to

use the touch pad or touch pad functions. Contact the PC

manufacturer for more details.

The wheel moves, but the mouse cursor does not





In certain application s that do not suppor t the scrolling

function, the mouse cursor will not move when you move

the wheel.

Removing an unknown device

If the standard Windows mouse driver did not install correctly and this product is detected as an unknown device, remove the unknown device from Device Manager, and then repeat “Step 2 Installing the Receiver Unit” on the front of this sheet.

If there are multiple unknown devices, before

removing a device, check that it is ac tually this product. Disconnect the receiver unit and check which unknown device disappears. The device that disappears is this product. If the unknown device does not disappear even

after you have deleted the driver following the instructions below, it is possible that there is something wrong with the PC. Contact the PC manufacturer.

To us e t he butto n a lloca tion fun ctio ns and flyi ng scrol l function, yo u need to install the ELE COM MouseAssi stant 2 that can be downloaded from the ELECOM website.

Obtaining ELECOM MouseAssistant 2

Access the ELECOM websi te us ing the f ollowin g URL and download the latest driver.

http://www.elecom.co.jp/global/ download/utility/mouse_assistant/

Installing the ELECOM MouseAssistant 2 for Windows

Before installation....

Keep the mouse installed. For details, see "Step 2

- Installing the Receiver Unit" on the front of this sheet. If mouse utility software from ELECOM or another

company is installed, uninstall it. Login with a user account that has administrative

privileges. It is recommended that all programs (application

software) be terminated.

* Though the subsequent screens of the installation program

dier depending on the OS, the procedure is the same.

Double-click the downloaded "mouse_

driver_xxxx(.exe)".

* The le name may be dierent depending

on the version of the driver.

The installer is activated.

When the "user account control" screen is displayed, click [Permit] or [Continue].

Click .

If other mouse utilities have been installed,

•

click

to uninstall them.

If a previous version of MouseAssistant has been

•

installed, follow the instructions on the screen to uninstall it.

Click .

Installation starts.

Click .

After installation is complete, click to

restart the PC.

Now, the installation of the ELECOM MouseAssistant 2 for Windows is complete.

After restart, mouse functions can be set. Right-click

•

the icon in the task tray or notication area and select [Properties].

If the

icon is displayed in the Notification Area in Windows® 7, click it and then right click the icon and then click the [Properties].

For the setting method, see the Help le.

•

Installing the ELECOM MouseAssistant 2 for Macintosh

Before installation....

Keep the mouse installed. For details, see “Step 2 -

Installing the Receiver Unit” on the front of this sheet. If mouse utility software from ELECOM or another

company is installed, uninstall it. Login with a user account that has administrative

privileges. It is recommended that all programs (application

software) be terminated.

Double-click the downloaded

"ELECOM_Mouse_Installer_ X.X.X.X.dmg".

The disk image is mounted on the desktop and a window is displayed.

* The f ile name may be diffe rent depe nding on the

version of the driver.

Double-click the "ELECOM_Mouse_Installer_

x.x.x.x" that has been displayed.

The installer is activated.

Click .

If “MouseAssistant” has been installed, click

and uninstall.

Click .

Enter a user name

and password with administrative privileges and click

Click .

File copying starts.

After installation is complete, click to

restart the Macintosh.

Now, the installat ion of t he ELECOM Mo useAssistant 2 for Macintosh is complete.

After restart, mouse functions can be set. Click ing the• icon registered in the Dock causes the utilities to start. (The icon is only registered in the Dock for the user who installed the sof tware. If you are not the user who installed the software, click [Applications] -> [Utilities] and double-click "ELECOM_Mouse_Util". For the setting method, see the help le.

•

Using the button allocation functions and ying scroll function

5-button wireless Blue LED mouse

M-BL2DB Series

User's Manual

1st edition, January 10, 2012

ELECOM Co., Ltd.

This manual is copyright of ELECOM Co., Ltd.• Unauthorised copying and/or reproducing of all or part of this • manual is prohibited. The specifications and appearance of this product may be • changed without prior notice for product improvement purposes. ELECOM Co., Ltd. shall bear no responsibility for any and all • affects resulting from the use of this product regardless of the above reasons. Export or service transaction permission under the Foreign • Exchange and Foreign Trade Control Law is required in order to export this product or par ts of this product that constitute strategic materials or services. Windows and the Windows logo are trademarks of the • Microsoft group of companies. Mac, Mac OS, and Macintosh are registered trademarks or • trademarks of Apple Inc., in the United States Company names, product names, and other names in this • manual are generally trademarks or registered trademarks.

당해 무선설비는 운용 중 전파혼신 가능성이 있음 .

이 기기는 가정용 (B급 ) 전자파적합기기로서 주로 가정에서

사용하는 것을 목적으로 하며 , 모든 지역에서 사용할 수

있습니다 .

Basic specications

Product name

5-button wireless Blue LED mouse

Article No. M-BL2DB Series

OS Windows 7 (up to SP1),

Windows Vista (up to SP2) Windows XP (SP3) Mac OS X 10.5 to 10.5.8, 10.6 to 10.6.8,

10.7 to 10.7.1

Resolution (dpi) 800/1600 (Switchable)

Interface USB

Radio frequency 2.4 GHz bandwidth

Radio wave method GFSK modulation

Radio wave outreach Non-magn etic subs tance (e.g. woo den

desk): Approx. 10 m Magnetic substance (e.g. metal desk): Approx. 3 m * Test values in the ELECOM environment

Mouse body dimensions 68.0 (W) x 108.0 (D) x 37.5 (H) mm

Receiver Dimensions 15.0 (W) x 17.5 (D) x 6.0 (H) mm

Operating temperature/ humidity

5 to 40°C, 90% RH max. (no condensation)

Storing temperature/ humidity

-10 to 60°C, 90% RH max. (no condensation)

Batteries AAA alkaline battery, AAA manganese

battery, rechargeable AAA nickel hydride battery

Operating time Measure of the operating time when an AAA

alkaline battery is used Continuous operating time: Approx. 128 hours Continuous standby time: Approx. 187 days Estimated serviceable time: Approx. 59 days (when the PC is operated for eight hours a day and 25% of the PC operation is assigned to mouse operation)

ELECOM CO., LTD.

1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765 URL: http://www.elecom.co.jp/global/ overseas@elecom.co.jp

宜麗客（上海）貿易有限公司上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704 号電話 : 86-21-33680011 FAX : 86-21-64271706 URL : http://www.elecom-china.com/

ELECOM Korea Co., Ltd. 5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea TEL : 1588-9514 FAX : (02)3472-5533 URL : www.elecom.co.kr ELECOM Singapore Pte. Ltd 33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868) TEL : (65)-6347-7747 FAX : (65)-6753-1791 ELECOM India Pvt. Ltd. 408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India TEL: 011-40574543 e-mail: support@elecom-india.com URL: http://www.elecom-india.com/

Elecom M-BL2DB Series, M-PG3DL series, Kasane M-NE3DL Series User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual