Product status
Primary operations
Part Names
Thank you for purchasing this quality ELECOM product.
This user's manual explains the methods for the proper and safe usage of this stylus
type Bluetooth headset. Use this product after carefully reading and understanding the
contents of this manual. Store this document safely in a place where it can be accessed
whenever it is needed.
Necessary information when connecting:
User's Manual
Bluetooth ver3.0
Stylus type
Bluetooth headset
Vo.2
0000 (Four zeros)
LBT-PHS01
* In this user's manual, this product is generally referred to as [LBT-PHS01] unless there is a specific reason
to refer to it as otherwise.
LBT-MPPHS01 series
Package Contents
The following are included in the package for this product. Confirm package
contents before using.
Important Notice
The included USB charging cable is meant for use with this product ONLY.
Do not use this cable for any purpose other than charging this product.
Even if the connector type is the same, the pin configuration may differ and
cause a malfunction. Similarly, do not use a charging cable included with
another product to charge this product.
1
1
1 sheet
Headset
Lights red when charging.
Lights blue when charging is complete.
Turn the grip to
remove it.
To use this product with a mobile phone or smartphone, it is required to perform the
pairing function (registering the device for the first time) with the device with which you
want to use the product.
Please refer to the manual of your device for information regarding the operation of
the device.
Perform a search for this product from the pairing device (smartphone, tablet, or
mobile phone).
Search method varies depending on the device you are using. For information
about searching from your device, please refer to the manual of your device.
When this product is detected from a smartphone, tablet, or mobile phone, it
displays as [LBT-PHS01]. Please select and register this item.
When pairing is complete the LED lamp will blink blue in a loose pattern (approx.
once every 6 seconds). Then, connection will occur automatically.*
When using this headset with your mobile phone or smartphone, it is recommended that you
pair them using the Hands-Free Profile (HFP) to make the functions of the phone available on
this product. If Hands-Free Profile is not available, use Headset Profile (HSP) for pairing.
If a message appears prompting you to enter a link key, enter [0000] (four zeros). Depending on
the device (Bluetooth 2.1 or later), registration may complete without having to enter a link key.
* Depending on the device, it may be necessary to perform a [Connection] procedure after
pairing is completed. Please refer to the manual of your mobile device for information, and
perform a [Connection] procedure if necessary.
Enter the headset into pairing mode
With the power of this product turned OFF, press and hold the multi-function
button for 5 seconds or more. When the LED lamp begins alternately blinking red
and blue, the device has entered pairing mode.
When pressing and holding the button for 5 seconds, the LED lamp will display
as follows:
* If any devices which have already been paired are nearby, you can take your finger off
of the button as soon as the power turns on. Reconnection will occur automatically.
Depending on the device, an automatic reconnection function may not be available. In
that case, the device may be connected by pressing the multi-function button several
times. Some operation may also be required on the connected device.
How to perform pairing (registering the device for the first time with the device)
Basic operation
This product must be charged before use.
Use the included USB cable to charge.
Connect the microB connector of the included USB charging cable to the
charging connector.
Connect the series A connector of the USB charging cable to the USB port of
your PC, etc.
* If the PC is not connected to a power source, it will not output charging power.
How to use this product
It takes about 2 hours before charging is completed. If the LED does
not change to blue after 2 hours, immediately disconnect the charging
cable and stop charging. Charging for more than two hours can
shorten the battery life and may lead to device failure. Also, the
product cannot be used while being charged.
Making a call on a mobile phone or smartphone
If there is no power or signal from a connected device or any paired devices
detected within approx. 5 minutes after turning this product on, this product will
automatically turn OFF. When the power is ON, the LED lamp blinks blue.
* You may need to approve or authenticate the headset connection (device name LBT-PHS01) or
perform a [Connection] procedure from the mobile device.
Turn power ON
With the power off, press and hold the multi-function button on this product for approx.
3 seconds. The LED lamp lights blue for 1 second and the product powers ON. The
headset will automatically connect to any devices in range on which pairing has
already been performed. When connection is completed, the LED lamp will begin to
blink blue in a loose pattern, and the device is now ready to use.
When the power is ON, press and hold the multi-function button on this device for
approx. 3 seconds. The LED lamp lights red for 1 second and then turns off, and the
product turns OFF.
If your conversation partner cannot hear your voice clearly, move the microphone
closer to your mouth.
Depending on the device specifications, your mobile phone or
smartphone may behave in a different manner than described in
relation to the operation of this product.
Light is off
(Power OFF)
Blinks blue
(Power ON)
Alternately blinking red and blue
(Pairing mode)
About the auto power-off function
Power ON/OFF
Red/Blue Blue
Blinks alternately red/blue
(pairing)
Slowly blinks blue
(approx. once every 6 seconds)
(pairing completed)
Before using
[Charging connection]
PC
USB charging cable
Series A
connector
microB
connector
To PC USB port
Recommended AC adapters
(commercially available)
Can also be charged by connecting to a
separately-sold ELECOM AC adapter.
• AVA-ACU series
• AVA-PA10ACU series
When a call is received on the connected device, the headset vibrates and the LED
lamp blinks blue.
Press the multi-function button once.
* A small incoming call ringing is output from the speaker. The volume cannot be adjusted.
* The vibration function cannot be turned off.
* Due to the device specifications, you cannot set incoming call
ringing to play on the Bluetooth headset.
Hold the speaker to your ear to talk.
The LED lamp blinks (once every 3
seconds) during conversation.
Turn the grip to remove it and connect the charging
connector to the plug.
Via the USB charging cable, connect the headset to
a PC, USB AC adapter or other USB power source.
Charging is completed when the LED lamp changes
to blue.
* If connecting to a device which uses Bluetooth 2.1 or later, it is not necessary to enter a link key.
This product is not equipped with a redial function. Place a call from
your device and then change the sound output setting to this product.
Product device name when detected
in a search from a mobile device:
Link Key:
Headset
USB charging cable
User's Manual (this document)
If the PC is not connected to a
power source, it will not output
charging power.
Be careful of the connector
orientation with connecting.
(Cannot be connected in reverse.)
Up to 8 pairing devices can be stored in memory. If more than 8 devices are stored, the oldest
device in memory will be erased. If reconnecting to a device which was erased from the
memory, pairing must be performed again.
If pairing cannot be completed due to problems such as a setting on the connection device,
turn off the power once, and try again.
This product conforms to Bluetooth 3.0 standards. If connecting to a device which uses
Bluetooth 2.1 or later, it is not necessary to enter a link key.
Searching for the headset from the connection device
Register the headset with the device with which you
want to perform pairing.
Turn power OFF
Answering a call
Terminating a call
When in conversation, press and hold the multi-function button for approx. 1 second.
Adjusting the volume
Perform using the volume button on this product. If you cannot achieve the desired
level of volume using the volume button on this product even when it is at maximum,
adjust the volume on the paired device.
Placing a call
To place a call, after dialling the recipient number switch the sound output setting.
* For information on switching the sound output on your mobile device, please refer to the manual of
that device.
iPhone 4: After placing a call, select (LBT-PHS01) as the sound output device.
Android: After placing a call, press the [Bluetooth] button on the screen.
USB AC adapter
To USB terminal To AC wall outlet
LED display LED display
Charging Lights red
Standby mode
Blinks every 6 seconds in
pairing mode
Blinks every 10 seconds in
non-pairing mode
Charging complete Lights blue
Receiving a call
Blinks blue approx. every 1 second
During a call
Blinks blue approx. every 3 seconds
Not enough battery charge remaining
Blinks red every 5 seconds
Grip
When holding the stylus, hold the grip
(the part that can be removed) in the
same way that you would normally hold
a ballpoint pen.
* Hold the pen near the tip as though using
an ordinary ballpoint pen
*Note - The pen will not work in the following situations:
When held near the top
When used while wearing gloves
While this product is compatible with capacitive touch panels, it may not respond
well when held near the top, when used while wearing gloves, or when used in a
similar fashion. When using this product as a stylus, always hold the grip with a
bare hand.
Correct usage
Speaker Outputs sound. Use this by holding it close to your ear.
Clip Clips to your shirt, breast pocket, etc. to secure the headset.
LED lamp Two-color (red and blue) LED lamp that displays pairing and power status.
Multi-function button This button controls functions such as power ON/OFF, pairing, answering/
terminating a call, etc.
Volume button ( / ) Press to increse volume or to decrese volume.
Microphone Microphone to input sound.
Charging connector Insert the included USB cable to charge.
Grip Remove grip when charging.
Stylus tip Stylus tip that supports an electrostatic touch panel.
* May be less responsive when a protective film is used.
Operation LED display
Power ON
When the power is OFF, press and hold the multi-function
button for approximately 3 seconds or more.
Lights blue for 1 second > Off
Power OFF
When the power is ON, press and hold the multi-function
button for approximately 3 seconds or more.
Lights red for 1 second > Off
Pairing mode
When the power is OFF, press and hold the multi-function
button for approximately 5 seconds or more.
Alternately blinking red and
blue
Volume adjustment Press the volume button (/) once. —
Answer call When a call is received, press the multi-function button once
. —
Terminate call
During a call, press and hold the multi-function button for approx. 1 second.
—
Reject call
When a call is received, press the volume buttons (/)
twice at the same time.
—
Basic Specifications
Handling precautions
Due to interference, it may sometimes not be possible to use in
combination with a 2.4 GHz band wireless LAN (IEEE802.11g/b/n).
It is not guaranteed that all Bluetooth devices will work with this
product.
Theoretical value. Transmission range is also
affected by the Bluetooth capability of the target
device and the conditions in the surrounding
environment.
When there is a long distance between this unit
and the Bluetooth device, the power
consumption for each will increase, resulting in
shorter available time.
*1 *2
If the items listed here are ignored, it may cause injury or
property damage.
Do not use this product while driving an automobile. Stop using the product
while walking, on train platforms, at intersections, and at construction sites, and
carefully check your surroundings.
Caution
If the items listed here are ignored, there is risk of death or
injury for the operator, or there is risk of property damage.
Warning
Used frequency band: 2.4 GHz
Modulation method: FHSS (Frequency Hopping Spread Spectrum)
Estimated interference distance: Approx. 10 m (when there are no obstructions)
Ability to change frequencies: Uses all bands and it is possible to avoid bands for "local wireless
base stations" or "designated low-power wireless stations"
In order to use this product properly and safely, the following important notice must be observed.
When the product emits a strange smell or smoke, stop using it immediately and
turn it off. If charging, unplug the included USB charging cable from the PC. After
doing this, stop using this product and contact the retailer where you purchased
this product.
This product is a precision electronic device. Avoid using or storing this product in
high temperature or humid areas, or in areas that are exposed to direct sunlight for
long period of time. Also, when there are sudden changes in the ambient
temperature, malfunctions may occur as a result of internal condensation.
If this product is left for a long period of time inside a car under high
temperatures, there is considerable risk that this will result in the rupture of the
internal battery, fire, or product breakdown.
If the product is charged for a length of time that exceeds the specified charging
time, there is a risk of the internal battery generating heat, catching fire, or
bursting. This may also affect the lifespan of the battery.
Not including operations that are performed in accordance with the directions in
this document, do not repair, modify, or disassemble this product yourself. Doing
so may cause electric shock, fire, or burns.
Doing so may cause fire or disconnection.
Under no circumstances should you use this product in locations where the
highest levels of safety are required. This product may cause malfunctions in
specialised medical facilities and aircraft instruments.
When using this product outdoors, adjust the volume properly so that you will be
aware of surrounding conditions. Avoid using it in places requiring attention to
safety such as on busy roads.
If liquid enters the inside of this product, it may cause product breakdown, fire,
or electric shock.
This may lead to an unexpected incident where this product is accidentally
ingested.
Depending on the model of car that is used, radio wave interference may occur
between this product and in-car devices. When something like this occurs,
cease use of this product.
Doing so may generate heat and cause fire or burns.
This product can be used with PCs and mobile phones via wireless
communications, but the configuration procedures and precautions differ
according to the connected device. When using the product, carefully read the
user's manuals for these products and follow their precautions.
When not using this product for extended periods of time, charge it about once a
month.
• Avoid using or storing this product in locations exposed to vibrations or impact, in high
temperature or humid areas, or in areas that are exposed to direct sunlight for long periods of time.
• This product is a precision device. Do not drop it or expose it to a strong impact.
• Do not place this product in locations with high temperatures and high humidity (vehicle
dashboards, near heaters, etc.), in locations exposed to direct sunlight for long periods of time, in
locations where static electricity easily occurs, or in locations with large amounts of dust.
• When this product becomes dirty, wipe it with a soft cloth that contains a small amount of water or
mild detergent. Using benzene or thinner will cause deformation or discoloration.
The band of frequencies used by this device are used to operate local wireless base stations
(wireless stations that require a licence) and designated low-power wireless stations (wireless
stations that do not require a licence) for the detection of moving objects on factory production lines
in addition to microwave ovens and other industrial/scientific/medical devices.
Before using this device, make sure that local wireless base station and designated low-power
wireless stations for the detection of moving objects are not being operated.
If this device has created radio wave interference for a local wireless base station for moving
object detection, quickly change the frequency that is used or stop radio wave emission and then
contact our technical support department for information on how to avoid interference (such as
installing a partition).
In other situations where some sort of problem has occurred such as when this device causes
an incident where radio wave interference is produced for a designated low-power wireless
station for moving object detection, contact our technical support department.
The battery is a consumable item that deteriorates even under normal usage. This is a feature of
the battery. It is not faulty. The internal battery is a fee-based repair, even within the warranty period.
This product uses a lithium polymer battery for its internal battery. The lithium polymer battery is a
recyclable resource.
If the product is stored for a long period of time without being used, the battery's performance
will decrease. The performance will be restored after the battery is charged and discharged a
number of times.
The standby time decreases in environments with a low ambient temperature.
Troubleshooting
The product does not have any power.
Always ensure that the battery for this product is fully charged.
Charge the headset to see if the problem is solved.
While using your mobile phone or smartphone
Basic operation, in pairing mode
Cannot perform pairing with a Bluetooth device.
1. Please ensure that the device's Bluetooth functions can be used.
If pairing mode cuts off due to a time-out, it is necessary to perform the setting function again.
2. Confirm that the device supports the profiles used by this product.
After using the product with a different mobile phone, it is
necessary to perform pairing again.
Depending on the specifications of your mobile phone, smartphone, or other device, Depending on
your mobile phone or other device, after using the paired headset with another phone or device, it
may be necessary to perform pairing again.
When a call is received, even when the multi-function button is
pressed, it does not answer a call.
With some mobile phones and smartphones, it may be necessary to press the multi-function button
several times before the conversation will start. If the phone will not answer after pressing the
multi-function button once, try pressing it several times.
The phone immediately goes to voice mail when an incoming call is
received.
If the phone is set to go to voicemail after a short time, the voicemail will kick in before the call is
forwarded to this product. If this occurs, set your phone to wait for a longer time before a call goes
to voicemail service.
No voice heard during phone conversation.
With some mobile phones and smartphones, if there is a silence during conversation that is longer
than approx. 20 seconds, the phone will automatically go into power saving mode and the earphone
jack will turn off sound input/output. Because of this, sound may sometimes turn off during a
conversation. If this occurs, press the multi-function button on this product to take the phone out of
power saving mode.
Your conversation partner cannot hear your voice.
With some mobile phones and smartphones, it is necessary to manually set the microphone input
settings to ON. If the microphone input is turned OFF, your conversation partner will not be able to
hear your voice spoken through the headset microphone.
Your conversation partner cannot hear your voice clearly.
If your conversation partner cannot hear your voice clearly, move the microphone closer to your
mouth.
Earphone does not work when placing a call.
After placing a call from your mobile phone or smartphone, it is necessary to switch speaker/mic
operation from this product to the Bluetooth receiver. Please refer to the manual of your mobile
phone or smartphone for information on how to operate.
[Basic operation]
For iPhone4
After the call, change the sound output setting to LBT-PHS01 (the device name for this product).
For Android
After the call, press the Menu button and then the Bluetooth button.
Please also refer to "Handling precautions".
For proper and safe use
Do not operate while driving an automobile.
If an abnormality is found
Do not leave under high temperature.
Never leave this product inside a car.
When charging is completed, always unplug the charging cable.
If the product is not finished charging even when the specified
charging time has ended, stop charging the product and unplug
the charging cable.
Do not disassemble.
Do not damage the cord used for connection.
Do not use this product in hospitals or in aircraft.
When using this product outdoors, pay full attention to the safety
of your surroundings.
Do not use or leave in areas that contain a large amount of moisture.
Do not leave in areas that are reachable by small children.
As the main unit is a precision electronic device, avoid using or
storing it in areas where impact or vibration will occur, in areas
where strong magnetism is produced, or in areas where static
electricity is produced.
Do not use this product if it creates radio wave interference
with in-car devices.
When the product is charging, do not place objects around it or
the USB charging cable.
When using the product, follow the instructions in the user's
manual for the connected device.
Periodically charge the product.
Other: Please also pay attention to the following items.
Precautions regarding radio waves
About the internal battery
Discarding the product
ELECOM CO., LTD
URL: http://www.elecom.co.jp/global/
overseas@elecom.co.jp
ELECOM Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea
TEL : 1588-9514
FAX : (02) 3472-5533
URL : www.elecom.co.kr
新宜麗客民台（上海）商貿有限公司
上海市徐家匯肇嘉浜路1065甲号飛雕国際大厦704室
電話 ： 86－21－33680011
FAX ： 86－21－64271706
URL ： www.elecom.cn
ELECOM Sales Hong Kong Ltd.
2/F, Block A, 2-8 Watson Road, Causeway Bay, Hong Kong
TEL : (852) 2806-3600
FAX : (852) 2806-3300
e-mail : info@elecom.asia
URL : www.elecom.asia
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)
TEL : (65) 6347-7747
FAX : (65) 6753-1791
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL : 011-40574543
e-mail : support@elecom-india.com
URL : http://www.elecom-india.com/
ELECOM Europe GmbH
Schulstrasse 53, D-65795 Hattersheim, Germany
Telefon : +49 (0) 6190 88769 - 243
Telefax : +49 (0) 6190 88769 - 111
e-mail : contact@elecom-europe.com
URL : www.elecom-europe.com
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by [ELECOM CO., LTD.] is under license.
Product names, company names, and other names used in this User's Manual are generally the
trademarks or registered trademarks of their respective owners. The ® and ™ symbols have been
omitted from the body of this manual.
Part number LBT-MPPHS01 series
Bluetooth Specifications Bluetooth 3.0
Carrier Signal 2.402 - 2.480 GHz
Frequency diffusion method FHSS (Frequency Hopping Spread Spectrum)
Transmit range Class 2 Max. radius 10 m (if unobstructed) *1
Supported Profiles HFP (Hands Free Profile)
HSP (Headset Profile)
Max. no. of pairing devices 8
Continuous standby time Max. 90 hrs. *2
Continuous conversation time Max. 4.5 hrs. *2
Environmental conditions When
operating
Temperature
5 - 35°C
Relative humidity
0 - 80% (no condensation)
When
storing
Temperature
-10 - +50°C
Relative humidity
0 - 80% (no condensation)
Input voltage DC 5V/150mA
Battery type Lithium polymer battery
External dimensions (W x D x H) 13.7 x 13.7 x 135 mm (Excl. clip and protruding parts)
Weight Approx. 20 g
Loading...