Eleaf iJust D14 Kit User Manual

Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.
Product Introduction
iJust Digital 14 Kit includes GS14 and iJust D14 battery. That inherits the advantage of adjustable voltage from 3.3V to 5V and 10W strong output wattage. Nevertheless, more innovations are involved: a more elegant appearance, two types of battery capacity and thread. What’s more, the incremental tail LED digital display can show you the current power, voltage, puff seconds and other vapor data. It will acquaint you with the vaping condition more clearly and accurately.
Standard configuration
1× GS14 Atomzier 2× BDC Atomzier Head 1× iJust D14 Battery 1× USB Cable 1× Wall Adaptor 1× Manual
Parameter
GS 14
Length74.19mm(510 thread)/80.49mm(eGo thread) Diameter14mm Resistance: 1.6ohm/1.8ohm Capacity1.8ml Color: Silver Thread Type: 510 thread, eGo thread
iJust D14 Battery
Length: 650mAh:96.75mm(510 thread)/107.30mm(eGo thread) 900mAh:112.00mm(510 thread)/123.30mm(eGo thread) Diameter: 14mm Thread Type: 510 Thread, eGo Thread
iJust D14 Kit
User Manual
How to add liquid
1. Screw the base off connector.
2. Slowly refill the liquid into the two small holes along the tube. Pay attention that don’t add liquid into the the air pipe.
How to replace BDC atomizer head
1. Screw the base off connector firstly.
2. Pull out the BDC atomizer head from the base and replace a new one.
Base BDC Atomizer Head Atomizer Tube Mouthpiece
How to charge
iJust D14 battery is charged through USB port. One can take puffs while it is being charged.
Warranty
Please consult your Eleaf product warranty card. We are not responsible for any damages caused by human error. Our warranty is not available for products purchased from third-party vendors.
Precautions
a) Only have your iJust Digital 14 Kit repaired by Eleaf. Do not attempt to repair the unit
by yourself as damage or personal injury may occur.
b) Do not leave the iJust Digital 14 Kit in high temperatures or damp conditions,
otherwise it may be damaged. The appropriate operation temperature is within 0 to45 while charging and -10 to 60 while using.
c) Do not attempt to combine the iJust Digital 14 Kit with parts from other brands of
e-cigarettes. If it is damaged in this way, our company will not take on responsibility and your warranty will be void.
Quick Start
a) How to assemble:
Mount BDC atomizer head onto GS14 atomizer base and then put together base, tube and mouthpiece. Second, assemble iJust D14 battery and GS14 atomizer.
b) How to use:
Press the button five times to turn on the battery firstly. The LED digital display will show the current power. Long press the button while inhaling the mouthpiece lightly to get a puff. The LED digital display will show the increasing puff seconds. When you stop vaping, the total puff seconds will be displayed for 0.5s. After that, the LED digital display will show the current power for 3s.
c) How to adjust voltage?
The voltage is adjustable from 3.3 V to 5V. Through spinning the knob in anti-clockwise direction to increase output voltage and in clockwise direction to decrease output voltage. The LED digital display will show the current voltage . Lastly, press the button five times to turn off the battery.
Properties of iJust D14 battery
Power on and Power off: Press the button for five times to power on and off the battery. Over-current Protection: When over-current protection occurs, the puff seconds on the LED digital display will stop increasing. 2 seconds later, the LED digital display will show the current voltage for five seconds. At the same time, the button light will flash five times. Short-circuit Protection: When short-circuit occurs, the battery will shut off automatically. Low-voltage Protection: When the voltage of battery is below 3.3V, the button light will flash 40 times. At the same time, the LED digital display will go out. Unlock the Low-voltage Protection: When the voltage of battery is above 3.65V, the low-voltage protection will be unlocked.
High-safety, high-capacity, high-magnification and high-stability lithium battery. On the top end of the battery, there are Eleaf branded logo silk-screen and CE marking
laser.
On the bottom of the battery, there are the branded laser and silk-screen, the
significant symbols of Eleaf brand.
iJust D14 Battery GS14 Tube Mouthpiece
Email:info@ismoka.com
Web:www.eleafworld.com
Loading...