Eleaf iJust 2 User Manual

Notice for Use

Thank you for choosing Eleaf products! Please read this manual carefully
before use so as to use correctly. If you require additional information or have
questions about the product or its use, please consult your local agents, or visit
our website at www.eleafworld.com.

Product Introduction

iJust 2 atomizer features 5.5ml huge liquid capacity despite its light weight.
By adopting dual coil atomizer head, it can handle up to 80W and make
large cloud production. The special structure design for iJust 2 atomizer
standard base improves the heat dissipation capacity to a large extent.

Standard Configuration

1 x iJust 2 Mouthpiece
1 x iJust 2 Atomizer Tube
1 x EC Head (0.3ohm)
1 x iJust 2 Atomizer Standard Base
1 x iJust 2 Airflow Control Ring

iJust 2 Atomizer

User Manual

How to add liquid

1.First unscrew the base off the atomizer;

2.Then slowly refill the liquid into the hole along the tube;

3.Finally screw the base onto the atomizer again. (Note: Please do not
overfill)

How to assemble

1.First mount EC Head onto the atomizer base;

2.Then put together base, tube and mouthpiece;

3.Finally assemble iJust 2 atomizer and power supply together.

Atomizer Base EC Head Atomizer Tube Mouthpiece

How to adjust airflow

The amount of airflow can be adjusted by rotating the airflow control ring on
iJust 2 atomizer standard base so as to get different vaping experiences.

Precautions

1.Only have your iJust 2 atomizer repaired by Eleaf. Do not attempt to
repair the unit by yourself as damage or personal injury may occur.

2.Do not leave the iJust 2 atomizer in high temperatures or damp
conditions, otherwise it may be damaged.

3.Do not attempt to combine the iJust 2 atomizer with parts from other
brands of e-cigarettes. If it is damaged in this way, our company will not take
on responsibility and your warranty will be void.

Warranty

We are not responsible for any damages caused by human error. Our
warranty is not available for products purchased from third-party vendors.