Elcotec F7000491 User Manual

USER MANUAL / INSTRUKCJA OBSŁUGI

4 BEAM 4x10W LUMILUX

LED RGBW 4in1

F7000491

4 BEAM 4x10W LUMILUX LED RGBW 4in1 F7000491

www.flash-butrym.pl

1

Table of Contents

1 Introduction ...................................................................................................................................................... 2

2 Safety information ........................................................................................................................................... 2

3 Product information ........................................................................................................................................ 2

3.1 Specification ................................................................................................................................................ 2

4 Installation ........................................................................................................................................................ 3

5 Connections ...................................................................................................................................................... 3

5.1 Connecting DMX signal............................................................................................................................. 3

5.2 Voltage specification .................................................................................................................................. 3

5.3 Connecting power supply ........................................................................................................................ 4

6 Operation manual ............................................................................................................................................ 4

6.1 Control panel .............................................................................................................................................. 4

6.2 Menu ............................................................................................................................................................ 4

6.3 DMX channel list ........................................................................................................................................ 5

Spis treści

1 Wprowadzenie ................................................................................................................................................. 7

2 Zasady bezpieczeństwa .................................................................................................................................. 7

3 Informacje o produkcie ................................................................................................................................... 7

3.1 Specyfikacja ................................................................................................................................................. 7

4 Instalacja ........................................................................................................................................................... 8

5 Połączenia ......................................................................................................................................................... 8

5.1 Podłączenie sygnału DMX ........................................................................................................................ 8

5.2 Specyfikacja zasilania ................................................................................................................................. 9

5.3 Podłączanie zasilania ................................................................................................................................. 9

6 Instrukcja użytkowania ................................................................................................................................... 9

6.1 Panel sterowania ........................................................................................................................................ 9

6.2 Menu ............................................................................................................................................................ 9

6.3 Lista kanałów DMX.................................................................................................................................. 10

www.flash-butrym.pl

2

1 INTRODUCTION

Thank you for purchasing 4 BEAM 4x10W LUMILUX LED RGBW 4in1. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.

2 SAFETY INFORMATION

1. Installation should be done by qualified personnel in order to minimize the risk of accidental

electric shock

2. Disconnect the power supply before installation.

3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you

notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.

4. Do not use the device in high humidity conditions and at temperatures above 40° C

5. To avoid damage please don't use organic solvents to clean the fixture shell.

6. The device must be installed on stable structures

7. It should be installed in a well-ventilated place, at a distance of 15cm or more from the walls.

Please check if the fan and ventilation holes are unobstructed.

3 PRODUCT INFORMATION

3.1 Specification

 Power consumption: 180W
 Power supply voltage: 110 - 220V
 Voltage frequency: 50/60Hz
 Diode type: 4in1
 Number of diodes: 4
 Diode power: 10W
 Display: LED - 4 characters
 Color: RGBW
 Beam angle (min): 2,6°
 Beam angle (max): 2,6°
 Dimming: Linear: 0 - 100%
 Flash frequency (min): 1Hz
 Flash frequency (max): 20Hz
 PAN range: 540°
 TILT range: 270°
 DMX standard: DMX 512
 Control interface: 4 buttons
 Operating modes: DMX, Automatic, Sound controlled
 Features: Electronic position correction
 AC IN: powerCON
 AC OUT: powerCON
 DMX IN: XLR - 3 pin
 DMX OUT: XLR - 3 pin
 IP Rating: IP22
 Housing made: Aluminium

4 BEAM 4x10W LUMILUX LED RGBW 4in1 F7000491

www.flash-butrym.pl

3

 Cooling: Active
 Height [cm]: 26
 Width [cm]: 104
 Depth [cm]: 16
 Weight [kg]: 10
 Weight with packaging [kg]: 11,5
 Set includes: Power cord, Mounting bracket (2pcs), Mounting screws (for mounting bracket)

4 INSTALLATION

After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.

Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.

5 CONNECTIONS

The device is equipped with the following interfaces:

1. DMX (in/out): XLR 3-pin socket

2. Power (in/out): powerCON

5.1 Connecting DMX signal

The connection is performed using cable with XLR-female -> XLR-Male plugs.

5.2 Voltage specification

Input Voltage

Total Power

Frequency

110~220V

180W

50/60Hz