ELCOM Uniq PC 150 User Manual
Uniq PC 150
User manual
version 1.1.7
This manual was not subject to any language revision.
This manual or any part of it may not be copied, reproduced or otherwise distributed without the
consent of the company ELCOM, spoločnosť s ručením obmedzeným, Prešov.
All rights reserved.
© 2013, ELCOM, spoločnosť s ručením obmedzeným, Prešov
3
Uniq PC
TABLE OF CONTENTS
INTRODUCTION ........................................................................................................................33
Important notice ..........................................................................................................................................34
Conformity declaration ...............................................................................................................................35
PRODUCT DESCRIPTION ........................................................................................................36
Parts of the uniq pc, basic features ..........................................................................................................37
Opportunities for attaching peripheral devices ......................................................................................38
HANDLING THE EQUIPMENT ..................................................................................................40
Switching on ......................................................................................................................41
Switching off ......................................................................................................................41
Restarting .......................................................................................................................... 41
Calibration of the touchscreen panel ....................................................................................................... 41
4-Point Calibration ..............................................................................................................42
Clear and Calibrate .............................................................................................................42
Linearization.......................................................................................................................42
Draw Test ..........................................................................................................................43
Setting up the touch panel .........................................................................................................................43
Setting up the monitor in OS Windows ....................................................................................................44
Setting the contrast and brightness ........................................................................................44
Rotating the image by 180° ..................................................................................................44
EMERGENCY HELP ..................................................................................................................50
Restoring the operating system in case of malfunction ........................................................................51
WAYS OF MOUNTING ...............................................................................................................52
Placement on a vertical surface (wall) for standard stand ............................................................53
The base tube 500 mm and 1300 mm ...................................................................................54
Identification and protective elements .....................................................................................................56
INTRODUCTION
Thank you for choosing the Uniq PC. Please read this user manual before you begin using the equipment in
order to become familiar with its features and functions. Also keep this user manual for future use. It will help
you solve problems that may arise.
IMPORTANT NOTICE
• The device must be under permanent supervision while “ON“ or in “STAND BY“ mode until it is turned
“OFF“ by the central switch and disconnected from the electrical system.
• Do not leave the device unattended while charging.
• Use only the power adapter and cable approved by ELCOM. Unauthorized adapters or cables can
cause batteries to explode or damage the device.
• Improper adapter connection can seriously damage the device. Any damage caused by misuse is not
covered under warranty.
• Do not remove the battery before disconnecting the power adapter. This could damage the device.
• Do not charge the device when the power cord is damaged or if the electrical outlet is not grounded.
This may cause electric shock or fire.
• If the device overheats, starts to smoke, makes strange noises or strange smells, immediately turn off
the main power switch and unplug the device.
• Do not bend the power cord or place heavy objects on it. Stepping on the power cord or its disruption
with heavy object could result in electric shock or fire.
• During a storm or when the device is out of service for longer, unplug the power adapter from the electrical outlet to prevent electric shock or fire.
• Install the product in a place where it will not be exposed to direct sunlight, unusual changes in temperature (below 0°C and over 40°C) or high humidity. Installation in an unsuitable place could cause
damage to the casing and electrical components
• Procedure for disconnection of the power connector:
1 - Connected connector.
2 - Grab the connector by plastic housing, back pulling of housing
release the safety catch and it enable to discon-nect power
connector strength.
3 – Plastic housing of disconnected connector returns to the starting
position itself
• When transferring the product between environments with different temperatures, do not switch it on for at least 60 minutes.
• Never use aggressive cleaning solutions when cleaning the product surface. The use of unsuitable
cleaning solutions can cause damage to the product.
• If the product is not functioning properly, turn to an authorized service technician. Do
not attempt to repair the product yourself. Never open the product casing!
• When plugging in this equipment always use the power adapter supplied or one
exclusively authorized by the seller. The use of another resource can lead to damage to the
source or the product.
• Notice: The adapter is specified for interior use only!
6
Introduction
• The use of sharp objects for handling the touch screen panel can seriously damage or destroy it.
• When used in spaces having critical temperatures, under certain conditions, the surface of the back
accumulator may reach temperatures as high as 60 - 75° C.
• This product cannot be cleaned using a stream of strong water spray, nor can it be submerged in water.
• Some electrical equipment producing interference and connected to the same electrical circuit can
cause the improper functioning of the equipment. In such cases, use a special anti-jamming device
recommended by the manufacturer.
•
Unplug the equipment from an electrical socket in order to fully disconnect it from the electrical network.
• The manufacturer is not responsible for any damage caused to the product in the case of improper
maintenance or use in a manner other than those described in these instructions.
• The symbol (a crossed-out wastebasket) on the product or its packaging means that the product, upon
completion of its lifespan, should not be disposed of in common household waste, but must be taken
to a site determined for the collection of worn-out electrical and electronic appliances. Proper liquidation of this product can help preserve natural resources and helps in the prevention of unacceptable
impacts on the environment and human health.
• The product contributes to environmental protection through the use of lead-free technology during its
production.
CONFORMITY DECLARATION
UNIQ PC 150 meets the requirements of the directives for the European Union market. The complete
conformity declaration is available on the address of manufacturer: ELCOM, spoločnosť s ručením
obmedzeným, Prešov, Jesenná 2695/26, 080 01 Prešov, Slovensko.
Operation of device with built-in WiFi/RFID module is possible under the conditions of the general license
issued by the national frequency regulatory body.
WARNING:
ELCOM notifies owners of the UNIQ PC 150 device, that in case of intervention into the BIOS part and
subsequent system damage, the claim for warranty repair will be rejected. An owner will be obligated to
refund all costs associated with the device repair.
7
Introduction
PRODUCT DESCRIPTION
PARTS OF THE UNIQ PC, BASIC FEATURES
The Uniq PC is a complete solution consisting of a monitor, a computer and a touch screen panel all in one
unit. The high-quality production and wide possibilities for use make the Uniq PC a unique solution for your
business. The Uniq PC is determined mainly for commercial operations, private and public institutions, or
for the medical sector as a surrogate imaging, optical and analysis device in environments calling for high
demands of air quality and in sterile environments. Its wide possibilities for use also include the managing
of production processes in demanding and complicated conditions while simultaneously preserving simple,
intuitive and efficient equipment operation.
Figure 1.1 – Basic features and controls
reset
power
status LED
indicator
reset
power
flexible leg
30°
reset
TUBE stand
power
flexible leg 30°
9
Product description
Loading...