Elco Lighting ELCO1282 Specifications

EL492RICA

4” Line Voltage Remodel
Shallow Housing for LED Inserts

DIMENSIONS

2 WIRE QUICK CONNECTOR

2 WIRE QUICK CONNECTOR

ADJUSTABLE SOCKET PLATE

3 1/2"

PROJECT INFORMATION:

Project Name:

Fixture Type:

Date:

MOUNTING CLIP

MOUNTING CLIP

JUNCTION BOXJUNCTION BOX

11 "

4"

4 1/4"

PRODUCT SPECIFICATIONS

• Single wall IC construction, for use in insulated
ceilings.

• 3 1/2” height allows for use in 2 x 6 construction.

• Adjustable housing accommodates up to 1 1/4”
ceiling thickness.

• Housing meets restricted air flow requirement
(per ASTM E-283).

• CA Title 24 compliant (as low effeciency luminaire).

• Trims sold separately.

INSTALLATION

Junction Box: Pre-wired junction box provided with
1/2" and 3/4" knockouts. Maximum (8) No. 12 AWG
branch circuit conductors (4 in, 4 out). Junction box
provided with removable access plates.

Lamp: 14W Max 120V

.Lamp Holder: 2-wire quick connect terminal connector

Labels: U.L. listed for damp locations
U.L. listed for feed through
U.L. listed for direct contact with insulation

Mounting: (4) remodel clips secure housing and
accommodate various ceiling thicknesses.

Mounting Frame: Stamped galvanized steel
construction for corrosion resistance

CATALOG NUMBER

Example: EL492RICA
See trims page for variety of trims avaliable

2042 East Vernon Avenue, Vernon, CA 90058 • Tel: [phone] Fax: [phone] • www.elcolighting.com
© ELCO LIGHTING 2015 All Rights Reserved. Rev. July 2015. ELCO Lighting reserves the right to make specification and design changes without notice.

ELCO

LIGHTING

ELCO Lighting©

ELCO Lighting©