ELC miniSTORE User Manual

miniSTORE

512 channel DMX recorder playback

Users Manual

Software version: 2.0

miniSTORE

The miniSTORE is a smaller and simpler version of the
showSTORE, using solid state non volatile memory for
storage. The ministore is limited in memory capacity. Therefor
a compression is used during recoding. The intended
application of the product is to record and playback a single
small show with a few fixtures, scanners or moving heads for
shop windows, product display s etc.

Setup

On the back panel there are 4 dip switches with the following
preset functions:

Dipswitch 1 and 2 are used for setting number of channels and
the framerate:

1 2

Frames/sec:

↑ ↑

40

↓ ↑

33

↑ ↓

25

↓ ↓

12

A show with 12 moving lights with constant fading on 16-bit
pan/tilt, CMY and dimmer will record up to 6 minutes (@
40fps).
A show with just a few changes might record up to hours.

Dipswitch 3 and 4 are used for setting the mode of operation
according to the table below

3 4

Function:

↑ ↑

Normal record/play mode

↓ ↑

Play only mode, recording inhibited

↑ ↓

Contact play, no front panel control

↓ ↓

Start up in LOOP, no front panel control