ELC DT2210, DT125 User Manual

DMX Tool Splitter 2 to 10

User Manual

__________________________________________________________________________________

ELC DT2210 User Manual

__________________________________________________________________________________
ELC DT2210 User Manual

DMX Tool Splitter 2 to 10

User Manual

The ELC DT2210 is a 19” rackmount DMX splitter supporting the bidirectional
extension to the DMX protocol to accommodate Remote Device Management (RDM).

The DT2210 is used in larger DMX networks where more than simple daisy-chain
connections between multiple DMX devices (to a maximum of 32 devices) are
needed. The DT2210 splitter (hub) boosts the signal to create a ‘star’ network of 10
additional DMX lines from a choice of two DMX inputs. Outputs are grouped in pairs
that can be selected to input A or B by pressing the adjacent panel push button. A
fully galvanic-isolated version is also available.

The ELC DMX Tool Splitter 2 to 10 comes in two variations:

DT2210
DT2210_FI fully isolated

• 2 DMX inputs each with DMX thru (parallel) to 5 pairs of DMX outputs

selectable to A or B inputs (10 outputs total)

• Bi-directional Remote Device Management (RDM) compatible

• All DMX/RDM outputs are boosted signals (connect up to 32 devices per

output)

• Optocoupler isolation for inputs, full isolation available as option (FI option)

• Bi-colour LEDs confirm presence of viable DMX signal for inputs A and B

• USB connection for firmware updates

Features