ELC dmXLAN switch8 LX Installation Manual

dmXLAN switch8LX

Programmable Fast Ethernet switch

By ELC lighting bv

The dmXLAN switch8LX is an intelligent Ethernet network switch for 10/100 MBit applications. It
features 8 programable network ports, and programmable static multicast routing. The network
switch is to be used when needed to connect more than 2 Ethernet devices. Each CAT5 port has
a Neutrik Ethercon connector and can be connected to a different network device, with up to
100m (300ft) of cable in between. A network device can be a computer (laptop), WiFi acces point
(router), lighting console with Ethernet connection, DMX/Ethernet node, network audio device, …,
or a next Ethernet switch to expand the system.

The switch8LX is available in 4 options

• 8x CAT5 ethernet ports on Neutrik Ethercon

• 6x CAT5 ethernet ports on Neutrik Ethercon,

and 2x Fibre optic 100MBit ports (ports 1 & 2) on SC connector

• 8x CAT5 ethernet ports on Neutrik Ethercon, with Power Over Ethernet on ports 3 to 8.

• 6x CAT5 ethernet ports on Neutrik Ethercon,

and 2x Fibre optic 100MBit ports (ports 1 & 2) on SC connector,
with Power Over Ethernet on ports 3 to 8

On the front panel there are 11 LED’s
8x yellow Port indicators. (offÆno connection, onÆvalid connection, blinkÆreceiving data)
1x yellow CPU (blinkingÆCPU active) 1x red Allert (loop failur e) 1x green Po wer On