ELC dmXLAN node6x User Manual

dmXLAN node6x

6-port DMX Ethernet node, with built in 5-port Ethernet switch

Users manual

dmXLAN node6x

6-Port DMX Ethernet node with integrated 5-port Ethernet switch.
Front panel:

The front panel has 3 Ethernet 10/100 MBit ports on Neutrik Ethercon and 6 bi-directional DMX
ports (Male or Female on order). Next to the connectors there is a User Interface with a graphical
LCD screen and a rotary encoder with push function.

Back panel:
On the back there are 2 RJ45 Ethernet 10/100 MBit ports (ports 4+5) and the Fixed mains lead.

Network 10/100 MBit Ethernet (on Neutrik Ethercon or RJ-45)

The network connection uses a standard UTP network connection.

DMX port 1 – 5 (XLR5 Male or Female)

Pin Description

1 Ground/Screen
2 Data ­3 Data +
4 ­5 -

The DMX ports 1 to 6 are bidirectional(via programmable setup), have an internal termination
resistor and are RDM prepared.

This product may only be used for controlling
dimmers and moving lights. Using the product
out of these specifications will remove all
responsibility from the supplier