Elba PLANET Series Installation Manual And Operation Manual

PLANET Series Range Hood

Installation Guide
Operation Manual

IMPORTANT REMINDERS

USE

 This range hood has been designed for domestic household use only to

eliminate smoke and odor.

 Commercial usage for café’s, restaurants, and other similar establishments

will void the warranty of this product.

 Never use the range hood for purposes other than extracting kitchen smoke

and odor.

 Never leave high open flames under the hood when it is in operation.
 This range hood is not a toy. Please keep children and other unauthorized

persons not instructed to use the hood away from the appliance.

INSTALLATION

 The manufacturer will not be held liable for any damages resulting from

incorrect or improper installation.

 Installation must be carried out by a qualified and authorized ELBA Service

Technician.

 The minimum safety distance between the cooktop and the range hood is

650 millimeters (mm).

 Check that the electrical supply from the outlet to which it is to be plugged in

is matching with the requirements of the hood, as indicated by the product
label on the range hood.

 The exhaust pipe should have a minimum diameter of 150 millimeters (mm)

MAINTENTANCE

 Switch off and unplug the appliance from the main power supply before

carrying out any maintenance work. (When disconnecting the appliance, do
not pull on the cord as it might cause a short circuit. Instead, hold the plug
and apply pressure on it when pulling from the wall socket.)

 Clean the hood using a damp cloth and a neutral liquid detergent.
 Clean and/or replace the filters after the specified time period.
 There is risk of fire if cleaning is not carried out in accordance with the

guidelines and instructions as highlighted in the section“CLEANING AND
MAINTENANCE”.

LIABILITY

 The Manufacturer will not be held liable for any damages incurred as a

result of the improper installation, usage, and maintenance of this product.

INSTALLATION

Important Notes:
 The hood should be placed at a distance of

65-75cm from the cooking surface for
maximum performance.

 The exhaust pipe should have a minimum

diameter of 150 millimeters (mm)

 Try to avoid too many corner bends when

installing the exhaust pipe in order to ease
airflow and noise.

 Install the bracket on a hard and sturdy surface (with bracing if possible).

Make sure that the surface screws are long enough to bite into the wall and
tightened with enough torque.

 Make sure that the range hood is aligned properly, not tilted in either a

sideward or front/backward direction.