Elba GAS OVEN SERIES, EGC-C9703G(SS), EGC-C9704G(SS), EGC-C9703G(BK), EGC-C9704G(BK) Owner's Manual

For The Warranty Terms & Conditions, Please Refer To Warranty Certificate

Owner’s Manual

Please read this manual carefully before
operating your set.

Retain it for future reference.

Record model number and serial number
of the set.

See the label attached on the set and
quote this information to your dealer
when you require service.

GAS COOKER

GAS OVEN SERIES

2

INDEX

SAFETY PRECAUTIONS Page 03

INSTRUCTIONS FOR INSTALLATION Page 04

Dimensions and Installation Features Page 05

Electrical Connection Page 06

Connection of the Feeding Cable to the Mains Page 06

Electrical Features Page 06

Ventilation Page 07

Combustible Surfaces Page 07

Gas Connection Page 07

Conversion of Universal LPG to Natural Gas Page 08

Abnormal Operation Page 08

INSTRUCTIONS FOR USE – GAS HOB

Description of Symbols Page 09

Description of the Main Parts of the Gas Hob Page 10

Ignition and Operation of the Burners Page 10

Recommendations Page 11

Advice on the Use of Gas Burners Page 11

INSTRUCTIONS FOR USE – OVEN

Gas Oven Thermostat Knob – Bottom Heating Page 12

Manual Ignition Page 12

Gas Oven Thermostat Knob – Upper Grill Page 13

Gas Oven Function and Timer Knob Page 13

INSTRUCTIONS FOR COOKING Page 14

MAINTENANCE AND CLEANING Page 15

Cleaning the Oven Page 16

Cleaning the Enamel Trivet Page 16

Removing the Oven Door Page 16

Replacing the Oven Bulb Page 17

MAIN SPECIFICATIONS Page 18

3

Please read this instruction carefully. It is advisable to keep this instruction
manual in a safe place for future reference.

SAFETY PRECAUTIONS

1. Keep electrical appliances out of reach from children. Do not let them to

operate the appliances without supervision.

2. This product is for household and indoor use only.

3. This product is not intended for use by person (including children) with

reduced physical, sensory or mental capabilities unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.

4. If the power cord has damaged, it must be replaced by the service centre or

a qualified service technician to avoid hazard.

5. Before installation, check if the mains supply voltage is matched with the

voltage stated on the rating plate of the appliance.

6. There must be adequate air ventilation of the room when the product is

used.

7. There is a risk of fire if cleaning is not carried out in accordance with this

instruction.

8. Do not touch the oven interior during or after cooking with bare hand.

9. Before maintenance or cleaning, disconnect the appliance from the mains

and wait for it to cool down.

10. Always use oven gloves to remove and replace food in the oven.

11. Do not remove the plug by pulling the cable.

12. Do not store or place flammable liquids or items in the vicinity of this

appliance.

13. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the

oven door glass since they can scratch the surface, which may result in
shattering of the glass.

4

INSTRUCTIONS FOR INSTALLATION

WARNING:

a) Before using the appliance, please remove all plastic films and packaging

material from the appliance.

b) Do not use the appliance as a space heater.
c) When the appliance is not in use for a long period, it is recommended to

disconnect the current and to shut off the gas supply.

d) Prior to installation, ensure that the local distribution conditions (nature of

the gas and gas pressure) and the adjustment of the appliance are compatible;

e) The adjustment conditions for this appliance are stated on rating plate;
f) This appliance is not connected to a combustion evacuation device. It shall

be installed and connected in accordance with current installation regulations.

Particular attention shall be given to the relevant requirements regarding

ventilation.

g) Do not store items that are attractive to children above or near the

appliance.

h) When the oven or the grill is in use, accessible parts can become very hot,

it is necessary to keep children well away from the appliance.

i) Never cook food directly on the lower wall of the oven.
j) Do not let children sit down or play with the oven door. Do not use the

drop down door as a stool to reach above cabinets.

IN CASE OF FIRE

In case of fire, close immediately the main valve of the gas pipe line, disconnect

current and never pour water on firing oil in any case.

Do not store flammable products or aerosol containers near the burners, and do

not vaporize them near lighted burners.

5

DIMENSIONS AND INSTALLATION FEATURES

The cooker is supplied with an anti-tilting chain to prevent the appliance from
tilting forward and causing accidental damage to the gas pipe. Take the
expansion with hook and make an adequate hole in the wall behind, at the same
height as the chain fixing area. Insert the plug into the hole and then screw in
the hook until it is firmly fixed to the wall. Fix the chain to the hook. Adjust to
level of the cooker by inserting the feet provided.

6

ELECTRICAL CONNECTION

This appliance must be installed by a qualified person in accordance with the
latest edition of the IEE Regulations and in compliance with the manufacturer
instruction. Ensure that the voltage is the same as stated on the rating plate.
The rating plate can be found at the rear panel of the appliance.

WARNING: THIS APPLIANCE MUST BE EARTHED.
Be sure that the earth wire (green/yellow) is not interrupted by the switch. We
recommend that the oven circuit is rated to 15 amps.

CONNECTION OF THE FEEDING CABLE TO THE MAINS

Connect the feeding cable to a plug suitable for the load indicated on the rating
plate of the product. In case of a direct connection to the mains (cable without
plug), it is necessary to insert a suitable omnipolar switch before the appliance,
with minimum opening between contacts of 3 mm (the grounding wire should
not be interrupted by the switch).

Before connecting to the mains, make sure that:

1) The electrical counter, the safety valve, the feeding line and the socket are

adequate to with stand the maximum load required (see rating plate).

2) The supply system is regularly grounded, according to the regulations in

force.

3) The socket or the omnipolar switch can easily be reached after the

installation. After connecting to the electrical mains, check the supplying
cable does not come into contact with parts subject to heating. Never use
reductions, shunts, adaptors which can cause overheating or burning.

4) The manufacturer is not liable for any direct or indirect damage caused by

faulty installation or connection. It is therefore necessary that all installation
and connection operations are carried out by qualified personnel complying
with the local and general regulations in force.

ELECTRICAL FEATURES

Oven light 25W
Top inner heating element 2250W
Top outer heating element 1800W
Bottom heating element 1250W

Cooling fan 18W