Elba 1788, 2788, 3888 Operating And Maintenance Instructions Manual

OPERATING AND MAINTENANCE
INSTRUCTIONS FOR BUILT-IN
OVENS
Installation Instruction
Warning and safety instructions Before using the oven for the first time,read these operating instructions carefully for full information on the safe installation, use and care of your new appliance.
This unit must be correctly installed inaccordance with the manu­facturer's instructions by a suitably qualified person.
The manufacturers decline responsibility for damage to persons or items due to poor or incorrect installation of this appliance.
Make sure that the voltage and fre­quency of the mains supply correspond to the details on the rating plate which can be found on the lower part of the front of the oven.
Warning: this appliance must be earthed.
Our cornpany declines any liability for failures in the earth connection or for earth connection that is not in compliance with the regulations in force.
Maintenance and servicing work must only be carried out after the power supply has been disconnected by switching off at the wall socket or removing the mains fuse. Due to our polìcy of continuous innovation, we reserve the right to adjust or modify our product without prior notification. Do not let children near the oven during use as external surfaces including glass will become hot so, to avoid the danger of burns or injuiry.
Supervise the use of the oven by the eldeirly or infirm.
Where an oven is built-under with a drawer beneath, this must be made non functioning with a ‘dummy’ front.
On no account should flammable mate­rials be stored in a drawer beneath a built-under oven as there is a risk of fire. Do not place heavy objects on the open door or sit on it as this could cause damage to the hinging.
When cooking with oil or fat, do not leave the oven unattended as there is a risk of fire.
To avoid damage to the interior enamel, do not place the oven pan or baking trays on the bottom of the oven and do not line the base of the oven with aluminium cooking foil.
During cooking, food naturale produces steam which is vented away to prevent an eccessive build-up within the oven. As this steam can condense to water droplets on the cool outer trim of the oven, it may be necessary during cooking to wipe away any moisture with a soft cloth.This will also help to prevent soiling and discolouration of the oven exterior by cooking vapours.
Before using for the first time
Switch off the oven at the wall socket or remove the mains fuse before cleaning. Remove any packaging and the oven accessories from the oven. Wipe the oven interior using hot water and a mild detergent. Rinse carefully using a damp cloth. Wash the oven shelves and accessories in a dishwasher or using hot water and a mild detergent, and dry thoroughly.
1
Technical details
This appliance conforms to the standard regarding suppression of radio reception interference.
Voltage regulations
230 V phase + neutral.
Built-in oven dimension:
Lenght : 440
Depth : 390
Height : 340
Volume : 59 lt
Wattage of heating elements
Lower heating element : 1,3 kW
Top oven heating element : 0,9 kW
Grill element : 1,35 kW
Fan element ( internal front part): 2,3 kW
Maximum intake of oven : 2,35 kW
Built-in installation
IMPORTANT: The unit must be correctly installed in accordance with Manufacturers instructions and by qualified person. Maintenance and servive must be carried out after the power supply has been disconnected.
ELECTRICAL CONNECTION: Make sure that voltage supply is the same as what is on the rating plate which can be found on the lower part of the front of the oven.
The oven must be connected by means of a 13 AMP power point close to the rear of housing cabinet.
The oven must be protected by a 13 AMP fuse.
If further mains cable is needed, it must be with minimun selectional are of 1,5 mm.
Sufficient cable must be left for easy maintenance of the appliance.
Warning: this appliance must be earthed.
Proper earthing is mandatory for the appliance.
Our company declines any liability for failures in the earth connection that is not in compliance with the regulation in force.
2
Note: It is reccomended that tin foil or aluminium not to be placed inside the
oven.
This appliance is designed for building­in to a standard 600mm wide oven housing.
The housing, adjacent furniture and all materials used in installation must be able to withstand a minimum temperature of 80°C plus ambient temperature during periods of operation. In addition, adjacent furniture cabinet doors must be at least 8mm from the appliance at all points. Certain types of vinyl or laminate kitchen furniture cabinetry
are particularly prone to heat damage and discoloration,any delamination or discoloration of materials which occurs below 80°C plus ambient temperature or where materials are less than 8mm from the appliance will be the liability of the owner. The housing into which the appliance is installed must incorporate a full depth shelf positioned 85÷ 90mm below the support shelf for the appliance. For building-under a worktop, the installation dimensions are as follows:
3
Oven operation
1 - Thermostat 2 - Selector 3 - Electronic programmer 4 - Timer 5 - Yellow light 6 - Green light 7 - Conventional clock timer
4 6 5 2 1
2 6 7 5 1
2 6 3 5 1
4
Loading...
+ 14 hidden pages