Elation WW Profile User Manual

ELATION

|

|

WW PROFILE™

user manual 

WW PROFILE

™

user manual

www.elationlighting.com

©2016 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ELATION PROFESSIONAL logo and identifying product names and numbers herein
are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ELATION brands and product
names are trademarks or registered trademarks of their respective companies.

ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any
persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper,
unsafe, insufficient and negligent assembly, installation, rigging, and operation of
this product.

Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040

323-582-3322 | 323-832-9142 fax | www.elationlighting.com | [e-mail]

Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands

[phone] | [phone] fax | www.elationlighting.eu | [e-mail]

DOCUMENT VERSION

Please check www.elationlighting.com for the latest revision/update of this manual.

Date

5/2015 1

2/18/16 2

Document

Version

Software

Version

≥1.0.1

≥1.0.2

DMX

Channel Modes

1/ 4 ETL version.

1/ 4

Notes

Added LED Calibration, Refresh Rate and

Gamma menus.

2 WW PROFILE™ User Manual

CONTENTS

General Information

4

Warranty

6

Safety Instructions

7

General Guidelines

8

Fixture Overview

9

Lens and Gobo Holder Installation

10

Fixture Installation

11

Fixture Menu

14

DMX Channel Functions And Values

23

Cleaning and Maintenance

24

Technical Specifications

25

Optional Accessories

27

www.elationlighting.com

3 WW PROFILE™ User Manual

www.elationlighting.com

GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! This fixture has been designed to

perform reliably for years when the guidelines in this booklet are followed. Please

read and understand the instructions in this manual carefully and thoroughly

before attempting to operate this unit. These instructions contain important

information regarding safety during use and maintenance.

UNPACKING

Every fixture has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that may

have occurred during shipping. If the carton appears to be damaged, carefully

inspect your unit for damage and be sure all accessories necessary to

operate the unit have arrived intact. In the event damage has been found or

parts are missing, please contact our customer support team for further

instructions. Please do not return this unit to your dealer without first contacting

customer support at the number listed below. Please do not discard the shipping

carton in the trash. Please recycle whenever possible.

4 WW PROFILE™ User Manual

CUSTOMER SUPPORT

Elation Professional® provides a customer support line, to provide set up help and

to answer any question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.elationlighting.com for

any comments or suggestions. For service related issue please contact Elation

Professional®.

ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST

Voice: 323-582-3322 Fax: [phone]

E-mail: [e-mail]

ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: [phone] Fax: [phone]

E-mail: [e-mail]

www.elationlighting.com

WARRANTY REGISTRATION

Please complete and mail in the enclosed warranty card or register online:

http://www.elationlighting.com/Login.aspx to validate your purchase. All

returned service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number must be

clearly written on the outside of the return package. A brief description of the

problem as well as the R.A. number must also be written down on a piece of

paper and included in the shipping container. If the unit is under warranty, you

must provide a copy of your proof of purchase invoice. Items returned without a

R.A. number clearly marked on the outside of the package will be refused and

returned at customer’s expense. You may obtain a R.A. number by contacting

customer support.

IMPORTANT NOTICE!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself; doing so will void your manufactures warranty. Damages resulting from

modifications to this fixture and/or the disregard of safety and general user

instructions found in this user manual void the manufactures warranty and are

not subject to any warranty claims and/or repairs.

5 WW PROFILE™ User Manual

www.elationlighting.com

LIMITED WARRANTY

A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to

be free of manufacturing defects in material and workmanship for a period of two years (730 days),

and Elation Professional® product rechargeable batteries to be free of manufacturing defects in

material and workmanship for a period of six months (180 days), from the original date of purchase.

This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only

if the product is purchased within the United States of America, including possessions and territories. It

is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at

the time service is sought.

B. For warranty service, send the product only to the Elation Professional® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement) are within

the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated

point within the United States. If any product is sent, it must be shipped in its original package and

packaging material. No accessories should be shipped with the product. If any accessories are

shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or

damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the product serial number and/or labels are altered or removed; if the

product is modified in any manner which Elation Professional® concludes, after inspection, affects

the reliability of the product; if the product has been repaired or serviced by anyone other than the

Elation Professional® factory unless prior written authorization was issued to purchaser by Elation

Professional®; if the product is damaged because not properly maintained as set forth in the product

instructions, guidelines and/or user manual.

D. This is not a service contract, and this warranty does not include any maintenance, cleaning or

periodic check-up. During the periods as specified above, Elation Professional® will replace

defective parts at its expense, and will absorb all expenses for warranty service and repair labor by

reason of defects in material or workmanship. The sole responsibility of Elation Professional® under

this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at

the sole discretion of Elation Professional®. All products covered by this warranty were manufactured

after January 1, 1990, and bare identifying marks to that effect.

E. Elation Professional® reserves the right to make changes in design and/or performance

improvements upon its products without any obligation to include these changes in any products

theretofore manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any accessory

supplied with the products described above. Except to the extent prohibited by applicable law, all

implied warranties made by Elation Professional® in connection with this product, including

warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above.

And no warranties, whether expressed or implied, including warranties of merchantability or fitness,

shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole

remedy shall be such repair or replacement as is expressly provided above; and under no

circumstances shall Elation Professional® be liable for any loss and/or damage, direct and/or

consequential, arising out of the use of, and/or the inability to use, this product.

G. This warranty is the only written warranty applicable to Elation Professional® products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

6 WW PROFILE™ User Manual

is an extremely sophisticated piece of electronic equipment. To

guarantee a smooth operation, it is important to follow the guidelines in this

manual. The manufacturer of this device will not accept responsibility for

lting from the misuse of this fixture due to the disregard of the

. It’s essential this device be

perform all electrical

SAFETY INSTRUCTIONS

www.elationlighting.com

This fixture

damages resu

information printed in this manual.

This device falls under PROTECTION CLASS 1

grounded properly. Only qualified personnel should

connections.

INDOORS USE ONLY!

DO NOT EXPOSE FIXTURE RAIN AND MOISTURE!

UNPLUG POWER BEFORE SERVICING FIXTURE!

DO NOT PLUG FIXTURE INTO A DIMMER PACK!

NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT!

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!
SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!

 For proper operation, follow the Installation guidelines described in this manual. Only qualified

and certified personnel should perform installation of this fixture and only the original rigging parts

(brackets) included with this fixture should be used for installation. Any modifications will void the

original manufactures warranty and increase the risk of damage and/or personal injury.

 Never look directly into the light source of this fixture to prevent risk of injury to your retina, which

may induce blindness. Those suffering from EPILEPSY should avoid looking directly into the light

source of this unit at all times.

 The fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between

this fixture and other devices or a wall for proper cooling.

 Always disconnect from main power source before performing any type of service and/or

cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by

tugging the wire portion of the cord.

 Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If

the power cord is damaged, replace it immediately with a new one of similar power rating.

7 WW PROFILE™ User Manual

www.elationlighting.com

GENERAL GUIDELINES

 NEVER OPEN THIS FIXTURE WHILE IN USE!

 During the initial operation of this fixture, a light smoke or smell may emit from the

interior of the fixture. This is a normal process and is caused by excess paint in the

interior of the casing burning off from the heat associated with the lamp and will

decrease gradually over time.

 This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS

ONLY on stage, in nightclubs, theatres, etc.

 Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while

operating, to prevent any fire hazard.

 The fixture must be installed in a location with adequate ventilation, at least 1.5

feet (.5m) from adjacent surfaces. Be sure no air ventilation slots are blocked.

 DO NOT attempt installation and/or operation without knowledge how to do so.

 DO NOT permit operation by persons who are not qualified to operate this type

of fixture. Most damages are the result of operations by nonprofessionals.

 Consistent operational breaks may ensure the fixture will function properly for

many years to come.

 DO NOT shake fixture, avoid brute force when installing and/or operating fixture.

 Always install the fixture with an appropriate safety cable. When installing the

fixture in a suspended environment, always use mounting hardware that is no less

than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw

holes in the bracket of the fixture.

 Use the original packaging and materials to transport the fixture in for service.

 DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power

and allow approximately 15 minutes for the fixture to cool down before replacing

or serving.

8 WW PROFILE™ User Manual

FIXTURE OVERVIEW

www.elationlighting.com

1. Lens (not included)

2. FOCUS

3. UP Button

4. DOWN Button

5. MODE/ESC Button

6. ENTER Button

7. LCD Menu Control Display

8. FUSE

9. 3pin DMX IN

10. 3pin DMX OUT

11. 5pin DMX OUT

12. 5pin DMX IN

13. powerCON IN

14. powerCON OUT

15. Mounting Yoke

16. BLADE SHUTTERS

17. ROTATION

18. Gobo Slot*
*Gobo and Holder not included

9 WW PROFILE™ User Manual

www.elationlighting.com

LENS AND GOBO HOLDER INSTALLATION

Gobo Holder (not included)
Supports “B” Size Metal and HT Transparency Gobos (not included)

10 WW PROFILE™ User Manual

Keep fixture at least 5.0 ft. (1.5m) away from any

should be used for all

FIXTURE INSTALLATION

www.elationlighting.com

FLAMMABLE MATERIAL WARNING

flammable materials, decorations, pyrotechnics, etc.

ELECTRICAL CONNECTIONS

A qualified electrician
electrical connections and/or installations.

CAUTIONS

 For added protection, mount the fixture in areas outside walking paths, seating

areas, or in areas were unauthorized personnel might reach the fixture.

 Ambient operating temperature range for this fixture is 14° to 113°F. (-10° to 45°C)

Do not use the fixture under or above this temperature.

 Before mounting the fixture to any surface, make sure the installation area can

hold a minimum point load of 10 times the weight of the fixture.

 Fixture installation must always be secured with a secondary safety attachment,

such as an appropriate safety cable.

 Never stand directly below the device when mounting, removing or servicing.

11 WW PROFILE™ User Manual

MOUNTING POINTS

 Overhead mounting requires extensive experience, including amongst others

calculating working load limits, installation material being used, and periodic

safety inspection of all installation material and the device. If you lack these

qualifications, do not attempt the installation yourself. Improper installation can

result in bodily injury.

 Fixture is fully operational in the specific mounting positions as illustrated below.

www.elationlighting.com

SAFETY CABLE

ALWAYS USE A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED

ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT DROP IF THE CLAMP FAILS.

12 WW PROFILE™ User Manual

CLAMP MOUNTING

This fixture includes an adjustable mounting yoke and safety cable rigging point

attached to the fixture (see the illustration below). When mounting this fixture to truss

be sure to secure an appropriately rated clamp (not included) to the yoke using an

M10 screw fitted through the center hole of the clamp. Be sure to attach the

included Safety Cable to the fixture using the safety cable rigging point.

www.elationlighting.com

SECURING

Regardless of the rigging option you choose for your fixture always be sure to secure

your fixture with a safety cable. The fixture provides a built-in rigging point for a

safety cable on the hanging bracket as illustrated above. Be sure to only use the

designated rigging point for the safety cable and never secure a safety cable to a

carrying handle.

13 WW PROFILE™ User Manual

www.elationlighting.com

FIXTURE MENU

ON-BOARD SYSTEM MENU

The fixture has an easy to navigate system menu. The next section will detail the

functions of each command in the system menu.

LCD MENU CONTROL PANEL

The control panel (see image below) located on the fixture allows you to access the

main menu and make all necessary adjustments to the fixture. During normal

operation, pressing MODE/ESC button once will access the fixture’s main menu.

Once in the main menu you can navigate through the different functions and

access the sub-menus with the UP and DOWN buttons. Once you reach a field that

requires adjusting, press the ENTER button to activate that field and use the UP and

DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm

your setting. You may exit the main menu at any time without making any

adjustments by pressing the MODE/ESC button.

14 WW PROFILE™ User Manual

ELATION© WW PROFILE™

S Y S T E M M E N U

Supports Software Versions: ≥1.0.1

Features are subject to change without any prior written notice.

MAIN MENU

SUB MENU

OPTIONS / VALUES

DESCRIPTION

Address

001~509

DMX Address Setting

SetSlave

Slave1, Slave2, Slave3

Slave Setting

Cur Time

XXXX(Hours)

Power On Running Time

Last Hrs

XXXX(Hours)

Fixture Last Times Clear

Clr Last

ON/OFF

Clear Fixture Last Time

XXX C° / F °

Soft Ver

=1.0.1 (or greater)

Software Version

NoDMXSta

CloShut/Hold/Auto

Auto Run If No DMX

Key Lock

ON/OFF

Key Lock

ResetDef

ON/OFF

Passcode 011

Restore factory settings

ProPart2 = Prog 1~10 (Program 2)

ProgTest = T01SCxxx

Testing Program

EdStep 01 =
S01SCxxx

EdStep 64 =
S64SCxxx

RecCntrl

XX~XX

Automatic Scenes Recorder

www.elationlighting.com

(Default Settings in BOLD)

FuncMode

Info

Persnal

ManCntrl

Mode Set

Dimming

ValuDisp =All Ch, Auto, Red, ReF, Gree, GreF... DMX Value Display

AutoProg Master / Alone Auto Program

TotalHrs XXXX(Hours) Fixture Running Time

TimeInfo

TimePass Password=XXX Timer Password 038

TempInfo HeadTemp

Stat Set

Disp Set

Temp C/F Cels/Fahren (4<?4A0CDA4'F8C274CF44=QQ

ManCntrl

UserMode 1CH, 4CH DMX Channel Modes

Dimming Standar, Stage, TV, Archite, Theatre Dimming Modes

Addr DMX ON/OFF Address Via DMX

Off Time 02~60m OFF Display Shut Off Time

Warm = Warm=xxx
:
DIMo = DIMo=xxx

Temperature in Fixture

Adjust Functions Manually

EditProg

Sel Prog

EditProg

EditScen

ProPart1 = Prog 1~10 (Program 1)

ProPart3 = Prog 1~10 (Program 3)

Prog 1
:
Prog 10

Scene 001
~
Scene 250

Cool = Cool=xxx
~
InByOut =
Time=xx.xs

Select Programs To Be Run

Program In Loop

Save and Exit

Save and Automatically Return
Manual Scenes Edit

15 WW PROFILE™ User Manual

ELATION© WW PROFILE™

S Y S T E M M E N U

Supports Software Versions: ≥1.0.2

Features are subject to change without any prior written notice.

MAIN MENU

SUB MENU

OPTIONS / VALUES

DESCRIPTION

Address

001~509

DMX Address Setting

SetSlave

Slave1, Slave2, Slave3

Slave Setting

Cur Time

XXXX(Hours)

Power On Running Time

Last Hrs

XXXX(Hours)

Fixture Last Times Clear

Clr Last

ON/OFF

Clear Fixture Last Time

XXX C° / F °

Soft Ver

=1.0.2 (or greater)

Software Version

NoDMXSta

CloShut/Hold/Auto

Auto Run If No DMX

Key Lock

ON/OFF

Key Lock

Refresh

Fq = 900 - 1500, 25000 (1200)

Refresh Frequency Rate Setting

ResetDef

ON/OFF

Passcode 011

Restore factory settings

White [255-0]

Calibrate LED

ProPart2 = Prog 1~10 (Program 2)

ProgTest = T01SCxxx

Testing Program

EdStep 01 =

EdStep 64 =
S64SCxxx

www.elationlighting.com

(Default Settings in BOLD)

FuncMode

Info

Persnal

ManCntrl

ValuDisp =All Ch, Auto, Red, ReF, Gree, GreF... DMX Value Display

AutoProg Master / Alone Auto Program

TotalHrs XXXX(Hours) Fixture Running Time

TimeInfo

TimePass Password=XXX Timer Password 038

TempInfo HeadTemp

Stat Set

Disp Set

Temp C/F Cels/Fahren (4<?4A0CDA4'F8C274CF44=QQ

Gamma Gama = 2.0, 2.2, 2.4, 2.8 Gamma Setting

ManCntrl

Calibrat

Addr DMX ON/OFF Address Via DMX

Off Time 02~60m OFF Display Shut Off Time

Warm = Warm=xxx
:
DIMo = DIMo=xxx

Password Passcode 050 Calibration Password 050

Temperature in Fixture

Adjust Functions Manually

Mode Set

Dimming

EditProg

UserMode 1CH, 4CH DMX Channel Modes

Dimming Standar, Stage, TV, Archite, Theatre Dimming Modes

ProPart1 = Prog 1~10 (Program 1)

Sel Prog

ProPart3 = Prog 1~10 (Program 3)

Prog 1

EditProg

EditScen

RecCntrl XX~XX Automatic Scenes Recorder

:
Prog 10

Scene 001
~
Scene 250

S01SCxxx

Cool = Cool=xxx
~
InByOut =
Time=xx.xs

Select Programs To Be Run

Program In Loop

Save and Exit

Save and Automatically Return
Manual Scenes Edit

16 WW PROFILE™ User Manual

www.elationlighting.com

FuncMode - Address

Define desired DMX address via the Control Panel.

FuncMode - ValuDisp

Display DMX 512 value of each channel.

FuncMode - SetSlave

Define fixture slave mode (Slave1, Slave2, Slave3).

FuncMode - AutoProg

Define fixture mode (Master or Alone) for running Auto Programs. Select desired

internal programs under “Select Program”, set the number of steps under “Edit

Program”, and edit individual scenes under “Edit Scenes”.

Info - TimeInfo - Cur Time

Displays fixture run time from last power ON.

The counter is reset after each time the fixture is powered OFF.

Info - TimeInfo - TotalHrs

Displays fixture total run time.

Info - TimeInfo - Last Hrs

Displays fixture run time for a given period of time (i.e. rental period).

This counter can be reset.

Info - TimeInfo - TimePass

Displays timer passcode. (038)

Info - TimeInfo - Clr Last

Clear fixture last run time.

Time can only be cleared after the timer password is entered.

Info - TempInfo - HeadTemp

Displays temperature of the fixture.

Info - Soft Ver

Displays software version of the fixture.

17 WW PROFILE™ User Manual

www.elationlighting.com

Persnal - Stat Set - Addr DMX

When ON, define the desired DMX address via an external controller.

1. Connect the fixture to the external controller and power ON.

2. Set the DMX value of Channel 1 on the controller to (7).

3. Set the DMX value of Channel 2 on the controller to (7) or (8).

When set to (7), the DMX address can be set between (1) and (255).

When set to (8), the DMX address can be set between (256) and (511).

4. Using Channel 3 on the controller set the desired DMX address of the fixture.

Example 1:
If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2 to

a value of (7), and then set Channel 3 to a value of (57).

Example 2:
If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel 2 to

a value of (8), and then set Channel 3 to a value of (164). (256+164=420)

5. After setting Channel 3 to the desired DMX address value, wait for approximately

20 seconds for the fixture to complete the address reset function.

Define desired DMX address via an external controller.

Persnal - Stat Set - NoDMXSta

Define how fixture operates if NO DMX signal is detected.

Persnal - Disp Set – Off Time

Define how many minutes before the LCD Menu display will automatically shut OFF.

Persnal - Disp Set – Key Lock

When ON, Control Panel buttons lock automatically after exiting main menu for 15

seconds. To unlock, keep MODE/ESC button pressed for 3 seconds.

Persnal – Temp C/F

Define how fixture displays internal temperature (Celsius or Fahrenheit).

Persnal – ResetDef

When ON, all factory settings are restored.

ManCntrl – ManCntrl

Adjust functions manually.

18 WW PROFILE™ User Manual

www.elationlighting.com

Mode Set – UserMode

Select DMX channel modes.

Dimming – DimModes

Select dimming modes (Standar, Stage, TV, Archite, Theatre).

EditProg – Sel Prog

Select one of the (10) user defined internal Auto Programs.

EditProg – EditProg

Edit any of the (10) user defined internal Auto Programs.

EditProg – EditScen

Edit any of the (250) scenes of the internal Auto Programs.

EditProg – RecCntrl

The fixture features an integrated DMX-recorder by which you can transmit the

programmed scenes from your DMX-controller to the moving head. Adjust the

desired scene numbers via the encoder (from – to). When you call up the scenes at

your controller, they will automatically be transmitted to the moving head.

19 WW PROFILE™ User Manual

www.elationlighting.com

EditProg – RecCntrl – Working With Built In Programs

A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master

unit can start 3 different Slave units, which run 3 different programs. The Master unit

sends the 3 program parts in a continuous loop.

The Slave unit receives data from the Master unit according to the group which the Slave

unit was assigned to. If e.g. a Slave unit is set to “Slave1” in the menu “SetSlave”, the Master

unit sends “ProPart 1” to the Slave unit. If set to “Slave2”, the Slave unit receives “ProPart 2”.

EditProg – RecCntrl – Working With Built-In Program [continued]

To start an Auto Program proceed as follows:

1. Slave Setting

K*5<53D“FuncMode”.

K(B5CCENTER to confirm.

K*5<53D“SetSlave”.

K(B5CC ENTER to confirm.

K*elect “Slave1”, “Slave2” or “Slave3”.

K(B5CCENTER to confirm.

K(B5CCMODE/ESC in order to return to the main menu.

2. Automatic Program Run

K*5<53D“FuncMode”.

K(B5CCENTER to confirm.

K*5<53D“AutoProg”.

K(B5CCENTER to confirm.

K*elect “Master” or “Alone”.

K(B5CCENTER to confirm.

K(B5CCMODE/ESC in order to return to the main menu.

20 WW PROFILE™ User Manual

www.elationlighting.com

EditProg – RecCntrl – Working With Built-In Program [continued]

3. Program Selection for Automatic Program Run

K*5<53D“EditProg”.

K(B5CCENTER to confirm.

K*5<53D“Sel Progm ”.

K(B5CCENTER to confirm.

K*elect “ProPart 1”, “ProPart 2” or “ProPart 3”, and select which

Slave program is to be sent. Selection “Part 1” means, the Slave unit runs the

same program as the master units.

K(B5CC ENTER to confirm.

K(B5CCMODE/ESC in order to return to the main menu.

4. Program Selection for Edit Program

K*5<53DOEditProg”.
K(B5CCENTER to confirm.
K*5<53D“EditProg”.
K(B5CCENTER to confirm.

K*elect the desired program to edit specific scenes into a specific program.
K(B5CCENTER to confirm.
K(B5CCMODE/ESC in order to return to the main menu.

5. Automatic Scene Recording

K*5<53D“EditProg”.

K(B5CCENTER to confirm.

K*5<53D“EditScen”.

K*5<53Ddesired scene numbers. A maximum of 250 scenes can be programmed.

K(B5CCENTER to confirm.

K(B5CCMODE/ESC in order to return to the main menu.

21 WW PROFILE™ User Manual

www.elationlighting.com

EditProg – RecCntrl – Working With Built-In Program [continued]

Example:

Program 2 includes scenes: 10, 11, 12, & 13

Program 4 includes scenes: 8, 9, & 10

Program 6 includes scenes: 12, 13, 14, & 15

Auto Pro Part 1 is Program 2

Auto Pro Part 2 is Program 3

Auto Pro Part 3 is Program 6

The 3 Slave groups run the Auto Program in certain time segments, as shown in the following

picture:

22 WW PROFILE™ User Manual

ELATION© WW PROFILE™

MODE /

CHANNEL

www.elationlighting.com

DMX CHANNEL FUNCTIONS AND VALUES

DMX Channel Values / Functions (4 DMX Channels)

Specifications are subject to change without any prior written notice.

VALUE FUNCTION

1CH 4CH

DIMMER

DIMMER FINE

STROBE

DIMMING CURVES

1 1

2

3

4

0-255 Intensity 0 to 100%

0-255 FINE Intensity 0 to 100%

0-31 LED OFF

32-63 LED ON

64-95 Strobe Effect SLOW to FAST

96-127 LED ON

128-159 Pulse Effect In Sequences

160-191 LED ON

192-223 Random Strobe Effect SLOW to FAST

224-255 LED ON

0-20 STANDARD

21-40 STAGE

41-60 TV

61-80 ARCHITECTURAL

81-100 THEATRE

101-255 Default to Unit Dimming Curve Setting

23 WW PROFILE™ User Manual

www.elationlighting.com

CLEANING AND MAINTENANCE

CAUTION

Disconnect power before cleaning or maintenance.

CLEANING

Frequent cleaning is recommended to insure proper function, optimized light output,

and an extended life. The frequency of cleaning depends on the environment in

which the fixture operates: damp, smoky or particularly dirty environments can

cause greater accumulation of dirt on the fixture’s optics.

 Clean the external lens surface at least every 20 days with a soft cloth to avoid

dirt/debris accumulation.

 Never use alcohol, solvents, or ammonia based cleaners.

MAINTENANCE

Regular inspections are recommended to insure proper function and extended life.

There are no user serviceable parts inside this fixture, please refer all other service

issues to an authorized Elation service technician. Should you need any spare parts,

please order genuine parts from your local Elation dealer.

Please refer to the following points during routine inspections:

 A detailed electric check by an approved electrical engineer every three

months, to make sure the circuit contacts are in good condition and prevent

overheating.

 Be sure all screws and fasteners are securely tightened at all times. Lose screws

may fall out during normal operation resulting in damage or injury as larger parts

could fall.

 Check for any deformations on the housing, color lenses, rigging hardware and

rigging points (ceiling, suspension, trussing). Deformations in the housing could

allow for dust to enter into the fixture. Damaged rigging points or unsecured

rigging could cause the fixture to fall and seriously injure a person(s).

 Electric power supply cables must not show any damage, material fatigue or

sediments. Never remove the ground prong from the power cable.

24 WW PROFILE™ User Manual

www.elationlighting.com

TECHNICAL SPECIFICATIONS

SOURCE
130W Warm White 3,000K LED Engine
50,000 Hour Average LED Life*

*May vary depending on several factors including but not limited to:
Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.

EFFECTS
Electronic Strobe and Dimming
Variable Dimming Curve Modes

GOBOS
Supports “B” Size Metal, HT Transparency Gobos*
*Gobos and Holder not included.

CONTROL / CONNECTIONS

2 DMX Channel Modes (1 / 4)
Adjustable Refresh Rate (900-1500, 25,000 Hz)
Adjustable Gamma Brightness (2.0, 2.2, 2.4, 2.8)
4 Button Control Panel / LED Menu Display
3/5pin DMX In/Out / powerCON In/Out

SIZE / WEIGHT

Length: 24.3” (618mm)
Width: 12.2” (310mm)
Vertical Height: 15.7” (398mm)
Weight: 21.0 lbs. (9.5 kg)

ELECTRICAL / THERMAL

AC 100-240V - 50/60Hz
160W Max Power Consumption
14° to 113°F (-10° to 45°C)

APPROVALS / RATINGS

CE | cETLus | IP20

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

25 WW PROFILE™ User Manual

PHOTOMETRIC DATA

www.elationlighting.com

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

26 WW PROFILE™ User Manual

DIMENSIONAL DRAWINGS

www.elationlighting.com

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

OPTIONAL ACCESSORIES

ORDER CODE ITEM

TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp

PHD019 Profile High Definition Lens 19°

PHD126 Profile High Definition Lens 26°

PHD236 Profile High Definition Lens 36°

PHD350 Profile High Definition Lens 50°

PLC3 3' (1m) powerCON PRO Link Cable

AC3PDMX5PRO 5 ft. (1.5m) 3pin PRO DMX Cable

AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable

Additional Cable Lengths Available

27 WW PROFILE™ User Manual