Elation LIGHT COPILOT III User Instructions

LIGHT COPILOT III

User Instructi ons

(Rev 1.0 24-004-1264)

E-mail: info@ elationlighting.com

Internet: http://www.elationlighting.com

2

1 General Introduction

Thank you for your purchase of our product LIGHT COPILOT II.

This is a high-performance lighting controller with many useful functions. 8 Channels output and
16 Channels output are available for your application. AUDIO and CHASE control are available by
this unit. A built-in microphone is provided for easy audio control. The “LATCH” function can
override the chase function to remain an individual channel “on”, while the other maintain their
chase sequence normally. There are 16 built-in programs for chasing effect which can be
operated in MANUAL mode or in AUTO mode. This manual contains important information for
user, please read it carefully before use.

Warning

• Keep the unit dry, do not expose it to water or high levels of humid.

• Reduce the risk of electric shock or fire during operation.

• Do not attempt to dismantle or modify the unit.

• Do not make any inflammable liquids, water or metal objects enter the unit.

• No user serviceable parts inside, always consult qualified personnel for repairs.

• Turn off the power if not using this unit for a long period.

• This product can be used by adults only, do not allow children to play with it.

2 Controls and Functions

2.1 Product View

LIGHT COPILOT II

AUDIO
x 1
10min

EFFECT

FLASH

LATCH

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

FOG

MACHINE

Heating

Ready

STAND BY

ON

OFFONOFF

ON

OFFONOFFONOFFONOFFONOFFONOFF

POWER USB LIGHT

CH1 - 8

CH1-16 LATCH

FLASH

Min Max

SPEED SPEEDSPEED

FLASH

AUDIO

OFF

FLASH

Min Max Min Max Min Max

CHASE

MANUALMANUAL 16 PRE PROGRAMS

AUTOAUTO

Ch5 - 8 /
CH13-16

CH1-4 /
CH9-12

AUDIO

1

2

3

4

5

6

7

8 9 10

11

14

15

16

17

18

19 20

21

12

13

16

1. Power switch:
Used to turn on / off the main power.

2. USB LIGHT connector:
To connect with the USB LIGHT.

3. Audio sensitivity adjuster:
To adjust the audio sensitivity the unit will react to.

4. FLASH SPEED adjuster:
To control and adjust the flashing frequency of the strobes.

5. FLASH LED:
To indicate relevant working states of the strobes.

6. SPEED adjuster upon CH1-4 / CH9-12:
This adjuster is used to control the Chase speed for 1-4 channels and 9-12 channels.

Chase speed adjustment for 9-12 channels can be available under 16 channels output
mode only. You can get higher speed levels while adjusting the knob towards “Max” ,
and get lower levels towards “Min”.