ELATION
|
|
IPC415™
user manual
IPC415
™
user manual
www.elationlighting.com
2
©2017 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ELATION PROFESSIONAL logo and identifying product names and numbers herein
are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ELATION brands and product
names are trademarks or registered trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any
persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper,
unsafe, insufficient and negligent assembly, installation, rigging, and operation of
this product.
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu
DOCUMENT VERSION
Please check www.elationlighting.com for the latest revision/update of this manual.
Date
10/04/17 1
Document
Version
Software
Version ≥
B1.1 V1.0
DMX
Channel
Modes
1 /4 Initial release.
Notes
IPC415™ User Manual
www.elationlighting.com
3
General Information
4
Warranty
6
Safety Instructions and Guidelines
7
Overview
9
Installation
11
System Menu
13
DMX Channel Functions And Values
14
Technical Specifications
15
Optional Accessories
17
CONTENTS
IPC415™ User Manual
www.elationlighting.com
4
GENERAL INFORMATION
INTRODUCTION
This device has been designed to perform reliably for years when the guidelines
in this booklet are followed. Please read and understand the instructions in this
manual carefully and thoroughly before attempting to operate this device.
These instructions contain important information regarding safety during use and
maintenance.
UNPACKING
Every device has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged, carefully
inspect device for damage and be sure all accessories necessary to operate the
unit have arrived intact. In the event damage has been found or parts are
missing, please contact our customer support team for further instructions. Please
do not return this device to your dealer without first contacting customer support
at the number listed below. Please do not discard the shipping carton in the trash.
Please recycle whenever possible.
BOX CONTENTS
(1) 12AWG/3 Bare Wire powerCON Cable
IPC415™ User Manual
www.elationlighting.com
5
CUSTOMER SUPPORT
Elation Professional® provides a customer support line, to provide set up help and
to answer any question should you encounter problems during your set up or
initial operation. You may also visit us on the web at www.elationlighting.com for
any comments or suggestions. For service related issue please contact Elation
Professional®.
ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST
Voice: 323-582-3322 Fax: 323-832-9142
E-mail: support@elationlighting.com
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 30 Fax: +31 45 546 85 96
E-mail: support@elationlighting.eu
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief description
of the problem as well as the R.A. number must also be written down on a piece
of paper and included in the shipping container. If the unit is under warranty, you
must provide a copy of your proof of purchase invoice. Items returned without a
R.A. number clearly marked on the outside of the package will be refused and
returned at customer’s expense. You may obtain a R.A. number by contacting
customer support.
IMPORTANT NOTICE!
There are no user serviceable parts inside this device. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. Damages resulting from
modifications to this device and/or the disregard of safety and general user
instructions found in this user manual void the manufactures warranty and are
not subject to any warranty claims and/or repairs.
IPC415™ User Manual
www.elationlighting.com
6
LIMITED WARRANTY
A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to
be free of manufacturing defects in material and workmanship for a period of two years (730 days),
and Elation Professional® product rechargeable batteries to be free of manufacturing defects in
material and workmanship for a period of six months (180 days), from the original date of purchase.
This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only
if the product is purchased within the United States of America, including possessions and territories. It
is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at
the time service is sought.
B. For warranty service, send the product only to the Elation Professional® factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement) are within
the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated
point within the United States. If any product is sent, it must be shipped in its original package and
packaging material. No accessories should be shipped with the product. If any accessories are
shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or
damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the
product is modified in any manner which Elation Professional® concludes, after inspection, affects
the reliability of the product; if the product has been repaired or serviced by anyone other than the
Elation Professional® factory unless prior written authorization was issued to purchaser by Elation
Professional®; if the product is damaged because not properly maintained as set forth in the product
instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include any maintenance, cleaning or
periodic check-up. During the periods as specified above, Elation Professional® will replace
defective parts at its expense, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of Elation Professional® under
this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at
the sole discretion of Elation Professional®. All products covered by this warranty were manufactured
after January 1, 1990, and bare identifying marks to that effect.
E. Elation Professional® reserves the right to make changes in design and/or performance
improvements upon its products without any obligation to include these changes in any products
theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory
supplied with the products described above. Except to the extent prohibited by applicable law, all
implied warranties made by Elation Professional® in connection with this product, including
warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above.
And no warranties, whether expressed or implied, including warranties of merchantability or fitness,
shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole
remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall Elation Professional® be liable for any loss and/or damage, direct and/or
consequential, arising out of the use of, and/or the inability to use, this product.
G. This warranty is the only written warranty applicable to Elation Professional® products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
IPC415™ User Manual
www.elationlighting.com
7
SAFETY INSTRUCTIONS AND GUIDELINES
This fixture is an extremely sophisticated piece of electronic equipment. To
guarantee a smooth operation, it is important to follow all instructions and guidelines
in this manual. The manufacturer of this device is not responsible for injury and/or
damages resulting from the misuse of this fixture due to the disregard of the
information printed in this manual. Only qualified and/or certified personnel should
perform installation of this fixture and only the original rigging parts (omega brackets)
included with this fixture should be used for installation. Any modifications to the
fixture and/or the mounting hardware included will void the original manufactures
warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - DEVICE MUST BE PROPERLY GROUNDED
ELECTRICAL CONNECTIONS BY QUALIFIED PERSONNEL ONLY!
INDOORS USE ONLY!
DO NOT EXPOSE DEVICE RAIN AND MOISTURE!
DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS DEVICE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING DEVICE!
KEEP FLAMMABLE MATERIALS AWAY FROM DEVICE!
DO NOT EXPOSE DEVICE TO HEAT OR FIRE!
AMBIENT TEMPERATURES: MAX 45°C/113°F | MIN 2°C/35°F
DO NOT EXPOSE DEVICE TO FLAMMABLE MATERIALS!
DO NOT EXPOSE DEVICE TO HIGH HUMIDITY!
DO NOT EXPOSE DEVICE TO EXTREME VIBRATIONS!
IPC415™ User Manual
www.elationlighting.com
8
SAFETY INSTRUCTIONS AND GUIDELINES
DO NOT shake device, avoid brute force when installing and/or operating.
DO NOT operate device if the power cord has become frayed, crimped and/or
damaged. If the power cord is damaged, replace it immediately with a new one
of similar gage/power rating.
DO NOT block any air ventilation slots. All fan and air inlets must remain clean and
never blocked.
When installing device in a suspended environment, always use mounting
hardware that is no less than M10 x 25 mm, and always use an appropriately
rated safety cable. (Not included)
Always disconnect device from main power source before performing any type
of service and/or cleaning procedure. Only handle the power cord by the plug
end, never pull out the plug by tugging the wire portion of the cord.
Use the original packaging and materials to transport the fixture in for service.
IPC415™ User Manual
www.elationlighting.com
9
OVERVIEW
1. 5pin DMX IN/OUT
2. Isolated 5pin DMX Outputs (x4)
3. OLED Control Menu Display
4. Push Button / Encoder Wheel
5. powerCON 15 amp Outputs (NAC3MPB-1 x4)
6. Fuses (15 amp x4)
7. Safety Cable Loop (cable not included)
8. Main Power Switch (20 amp)
9. powerCON 20 amp Main Power Input (NAC3MPA-1)
IPC415™ User Manual
www.elationlighting.com
10
OVERVIEW
10. M10 Screw Clamp Hole (Clamp not included)
11. Wall Mounting Keyhole Cutouts
IPC415™ User Manual
www.elationlighting.com
11
e at least 5.0 ft (1.5m) away from any
A qualified electrician should be used for all
INSTALLATION
FLAMMABLE MATERIAL WARNING
Keep devic
flammable materials, decorations, pyrotechnics, etc.
ELECTRICAL CONNECTIONS
electrical connections and/or installations.
CAUTIONS
Device can be placed on the flat surface, rack mounted in a standard 19-inch
single rack space (rack screws not included), truss or wall mounted.
For added protection, mount the device in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
Ambient operating temperature range for this fixture is 35° to 113°F. (2° to 45°C)
Do not use the device under or above this temperature.
Before mounting the device to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the device.
Device installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable. (Not included)
Never stand directly below the device when mounting, removing or servicing.
IPC415™ User Manual
www.elationlighting.com
12
CLAMP INSTALLATION
When mounting to truss, secure an appropriately rated clamp (not included) to the
device. Be sure to attach a Safety Cable (included) to the fixture using the safety
cable rigging point integrated into the back of the device. (See image below)
SAFETY CABLE RIGGING POINT
ALWAYS ATTACH A SAFETY CABLE TO THE DEVICE WHENEVER INSTALLING IN A
SUSPENDED ENVIRONMENT TO ENSURE THE DEVICE WILL NOT DROP IF CLAMP FAILS.
SAFETY CABLE
IPC415™ User Manual
www.elationlighting.com
13
SYSTEM MENU
Pressing the ENCODER WHEEL once will access the (11) main system menus. Rotate
the ENCODER WHEEL clockwise or counterclockwise to scroll through the (11)
different system menus then push the ENCODER WHEEL to select a desired menu.
Rotate the ENCODER WHEEL clockwise or counterclockwise to navigate the
available setting options for each sub-menu. Setting changes are made using a
combination of rotating/ pushing the ENCODER WHEEL.
IPC415™ User Manual
www.elationlighting.com
14
MAIN MENU
SUB MENUS
1. DMX Address
001-512
2. DMX Channels
1CH, 4CH
Turn OFF
Turn ON
On/Off Via DMX
On/Off if DMX On
Scheduler
Exit
All Ports On (0-120s)
All Ports Off (0-120s)
Exit
Power Port 1
Power Port 2
Power Port 3
Power Port 4
Exit
Scheduler (On/Off)
All Ports On (0-120s)
All Ports Off (0-120s)
Exit
Power Port 1
Power Port 2
Power Port 3
Power Port 4
Exit
Exit
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Everyday
Time Setup
Exit
6. Date&Time
(04/20/2017 11:00am
On
Off
8. Set LED Brightness
000-010
No
Yes
10. Information
11. Exit
3. Power Setup
All Power Ports
4. Output Delay
5. Scheduler
Unit Power Port
Even 1
Even 2
Even 3
Even 4
Even 5
Even 6
Even 7
Even 8
Exit
Power Ports
Weekly Setup Every
Port 1 (2,3,4) On (0-120s)
Port 1 (2,3,4) Off (0-120s)
Exit
All Power Ports
Unit Power Port
Port 1 (2,3,4) On
(0-120s)
Port 1 (2,3,4) Off
(0-120s)
Exit
7. Back Light
9. Factory Setting
IPC415™ User Manual
www.elationlighting.com
15
ELATION© IPC415™
DMX Channel Values / Functions (4 Total DMX Channels)
DMX CHANNEL FUNCTIONS AND VALUES
Supports Software Versions: ≥ B1.1 V1.0
Features are subject to change without any prior written notice.
MODE / CHANNEL
CH 1 CH 4
1 1
N/A 2
N/A 3
N/A 4
VALUE FUNCTION
0-149 OFF
150-255 ON
255-101 ON
100-0 OFF
0-149 OFF
150-255 ON
255-101 ON
100-0 OFF
0-149 OFF
150-255 ON
255-101 ON
100-0 OFF
0-149 OFF
150-255 ON
255-101 ON
100-0 OFF
DMX VALUE MOVEMENT 0-255
DMX VALUE MOVEMENT 255-0
DMX VALUE MOVEMENT 0-255
DMX VALUE MOVEMENT 255-0
DMX VALUE MOVEMENT 0-255
DMX VALUE MOVEMENT 255-0
DMX VALUE MOVEMENT 0-255
DMX VALUE MOVEMENT 255-0
CHANNEL FUNCTION IS SPECIFIC TO DMX VALUE MOVEMENT DIRECTION
0-255 DMX VALUE (OFF/ON) vs. 255-0 DMX VALUE (ON/OFF)
IPC415™ User Manual
www.elationlighting.com
16
TECHNICAL SPECIFICATIONS
CONTROL / CONNECTIONS
(2) DMX Channel Modes (1 / 4)
Push Button / Encoder Wheel
Internal On/Off Scheduler
OLED Control Menu Display
5pin XLR DMX Input
5pin XLR DMX Output (Thru-put)
(4) 5pin XLR DMX Outputs
(4) powerCON 15 amp Outputs (NAC3MPB-1)
Main 20 amp Power Switch
powerCON Power Input (NAC3MPA-1)
Rack Ears (fits standard 19-inch single rack space)
M10 Screw Hole for Clamp (clamp not included)
Safety Cable Loop (cable not included)
SIZE / WEIGHT
Length: 19.0” (482mm)
Width: 9.1” (232mm)
Vertical Height: 1.7” (44mm)
Weight: 6.6 lbs. (3.0 kg)
ELECTRICAL / THERMAL
AC 100-240V - 50/60Hz
7W Power Consumption (NO devices connected)
35°F to 113°F (2°C to 45°C)
APPROVALS / RATINGS
CE|
IPC415™ User Manual
www.elationlighting.com
17
DIMENSIONAL DRAWINGS
NOTE: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
OPTIONAL ACCESSORIES
ORDER CODE ITEM
PRO-CLAMP Heavy Duty 2 inch Pro Clamp
SCABLE60 Safety Cable 24” (610mm) 60 lbs. (27kg) Rating
AC3PDMX5PRO 5 ft. (1.5m) 3pin PRO DMX Cable
AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable
Additional Cable Lengths Available
IPC415™ User Manual
Loading...