Elation IMAGE PRO 300 Owner's Manual

English Version 2.0
OWNER'S GUIDE
IMAGE PRO 300
General Information
General Information
Unpacking:
Safety Instructions:
[ This product must be earthed. [ Do not make any inflammable liquids, water or metal objects
enter this unit.
[ Very hot lamp. Disconnect the power and wait for at least 10
minutes before you can replace the lamp.
[ Make sure the fan and the air inlets are clean and not blocked by
anything before usung.
[ Do not operate this unit if the ambient temperature(Ta) exceeds
40 C(104 F).
[ Do not stare directly into the light, as may do harm to your eyes. [ Keep all flammable meterials at least 1 meter away from this unit. [ Never operate this unit when its cover is removed. [ Keep this unit out of children. [ Do not dismantle or modify the unit. [ Unplug the fixture from the AC outlet and allow the fixture to cool
before any service.
1
Pack Accessory List:
! 300 Watt HTI 300 metal halide lamp ! 1.5 m 3-pin American Plug mains cable with female IEC plug ! Support for lens and effects, standard ! Standard lens (1:2.4 / 100 mm) ! Two electrified guides ! Two bakelite screws ! User's guide
[ Powerful communication tool to create maximum and
lasting visual image
[ Die-cast and extruded aluminum finish [ Forced fan cooling system [ Twin lens condenser, spherical reflector and external [ standard lens(1:2.4/100 mm) [ Two electrified guides carry a 24V supply and can
accommodate a lens andhousings for gobos and colors
[ Different diameters gobos and filters are optional for static
or motorized effects
[ Thermal cut-out [ Micro switch cuts off electricity supply when cover is
opened
[ Provides a wide range of optional effects on request [ Wide applications: Shop-fittings, Discotheques, Fashion
parades, Fairs, Event-marketing, and etc.
[
I.S.P. 300I.S.P. 300
Main Features
2
Loading...
+ 8 hidden pages