ELATION
|
|
FUZE WASH Z350™
user manual
FUZE WASH Z350
™
user manual
3U01: ≥1.01
3U01: ≥1.01
www.elationlighting.com
©2016 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ELATION PROFESSIONAL logo and identifying product names and numbers herein
are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ELATION brands and product
names are trademarks or registered trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any
persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper,
unsafe, insufficient and negligent assembly, installation, rigging, and operation of
this product.
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu
DOCUMENT VERSION
Please check www.elationlighting.com for the latest revision/update of this manual.
DMX
Channel Modes
15/ 16/ 17 / 19
15/ 16/ 17 / 19
Notes
Initial release.
Added missing section of DMX traits.
Date
09/15/16
09/19/16
Document
Version
1
1.2
Software
Version
IU01: ≥1.01
2U01: ≥1.01
IU01: ≥1.01
2U01: ≥1.01
2 FUZE WASH Z350™ User Manual
General Information
4
Warranty
6
Safety Instructions and Guidelines
7
Overview
9
Installation
10
Optional Snoot Installation
13
System Menu
14
DMX Channel Functions And Values
18
Error Codes
23
Cleaning and Maintenance
24
Technical Specifications
25
Optional Accessories
27
CONTENTS
www.elationlighting.com
3 FUZE WASH Z350™ User Manual
www.elationlighting.com
GENERAL INFORMATION
INTRODUCTION
Congratulations, you have just purchased one of the most innovative and
reliable lighting fixtures on the market today! This fixture has been designed to
perform reliably for years when the guidelines in this booklet are followed. Please
read and understand the instructions in this manual carefully and thoroughly
before attempting to operate this unit. These instructions contain important
information regarding safety during use and maintenance.
UNPACKING
Every fixture has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged, carefully
inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are
missing, please contact our customer support team for further instructions. Please
do not return this unit to your dealer without first contacting customer support at
the number listed below. Please do not discard the shipping carton in the trash.
Please recycle whenever possible.
BOX CONTENTS
(2) Omega Brackets
(1) powerCON Cable
4 FUZE WASH Z350™ User Manual
www.elationlighting.com
CUSTOMER SUPPORT
Elation Professional® provides a customer support line, to provide set up help and
to answer any question should you encounter problems during your set up or
initial operation. You may also visit us on the web at www.elationlighting.com for
any comments or suggestions. For service related issue please contact Elation
Professional®.
ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST
Voice: 323-582-3322 Fax: 323-832-9142
E-mail: support@elationlighting.com
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 30 Fax: +31 45 546 85 96
E-mail: support@elationlighting.eu
WARRANTY REGISTRATION
Please complete and mail in the enclosed warranty card or register online:
http://www.elationlighting.com/Login.aspx to validate your purchase. All
returned service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.) number. The R.A. number must be
clearly written on the outside of the return package. A brief description of the
problem as well as the R.A. number must also be written down on a piece of
paper and included in the shipping container. If the unit is under warranty, you
must provide a copy of your proof of purchase invoice. Items returned without a
R.A. number clearly marked on the outside of the package will be refused and
returned at customer’s expense. You may obtain a R.A. number by contacting
customer support.
IMPORTANT NOTICE!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. Damages resulting from
modifications to this fixture and/or the disregard of safety and general user
instructions found in this user manual void the manufactures warranty and are
not subject to any warranty claims and/or repairs.
5 FUZE WASH Z350™ User Manual
www.elationlighting.com
LIMITED WARRANTY
A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to
be free of manufacturing defects in material and workmanship for a period of two years (730 days),
and Elation Professional® product rechargeable batteries to be free of manufacturing defects in
material and workmanship for a period of six months (180 days), from the original date of purchase.
This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only
if the product is purchased within the United States of America, including possessions and territories. It
is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at
the time service is sought.
B. For warranty service, send the product only to the Elation Professional® factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement) are within
the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated
point within the United States. If any product is sent, it must be shipped in its original package and
packaging material. No accessories should be shipped with the product. If any accessories are
shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or
damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the
product is modified in any manner which Elation Professional® concludes, after inspection, affects
the reliability of the product; if the product has been repaired or serviced by anyone other than the
Elation Professional® factory unless prior written authorization was issued to purchaser by Elation
Professional®; if the product is damaged because not properly maintained as set forth in the product
instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include any maintenance, cleaning or
periodic check-up. During the periods as specified above, Elation Professional® will replace
defective parts at its expense, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of Elation Professional® under
this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at
the sole discretion of Elation Professional®. All products covered by this warranty were manufactured
after January 1, 1990, and bare identifying marks to that effect.
E. Elation Professional® reserves the right to make changes in design and/or performance
improvements upon its products without any obligation to include these changes in any products
theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory
supplied with the products described above. Except to the extent prohibited by applicable law, all
implied warranties made by Elation Professional® in connection with this product, including
warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above.
And no warranties, whether expressed or implied, including warranties of merchantability or fitness,
shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole
remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall Elation Professional® be liable for any loss and/or damage, direct and/or
consequential, arising out of the use of, and/or the inability to use, this product.
G. This warranty is the only written warranty applicable to Elation Professional® products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
6 FUZE WASH Z350™ User Manual
www.elationlighting.com
SAFETY INSTRUCTIONS AND GUIDELINES
This fixture is an extremely sophisticated piece of electronic equipment. To
guarantee a smooth operation, it is important to follow all instructions and guidelines
in this manual. The manufacturer of this device is not responsible for injury and/or
damages resulting from the misuse of this fixture due to the disregard of the
information printed in this manual. Only qualified and/or certified personnel should
perform installation of this fixture and only the original rigging parts (omega brackets)
included with this fixture should be used for installation. Any modifications to the
fixture and/or the mounting hardware included will void the original manufactures
warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED
DO NOT PLUG FIXTURE INTO A DIMMER PACK!
NEVER OPEN THIS FIXTURE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING FIXTURE!
NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT!
KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE FIXTURE TO RAIN AND MOISTURE!
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!
RETINA INJURY RISK - MAY INDUCE BLINDNESS!
SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!
7 FUZE WASH Z350™ User Manual
www.elationlighting.com
SAFETY INSTRUCTIONS AND GUIDELINES
DO NOT TOUCH the fixture housing during operation. Turn OFF the power and
allow approximately 15 minutes for the fixture to cool down before serving.
DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
DO NOT operate fixture if the power cord has become frayed, crimped and/or
damaged. If the power cord is damaged, replace it immediately with a new one
of similar power rating.
DO NOT block any air ventilation slots. All fan and air inlets must remain clean and
never blocked. Allow approx. 6” (15cm) between fixture and other devices or a
wall for proper cooling.
When installing fixture in a suspended environment, always use mounting
hardware that is no less than M10 x 25 mm, and always install fixture with an
appropriately rated safety cable.
Always disconnect fixture from main power source before performing any type of
service and/or cleaning procedure. Only handle the power cord by the plug
end, never pull out the plug by tugging the wire portion of the cord.
During the initial operation of this fixture, a light smoke or smell may emit from the
interior of the fixture. This is a normal process and is caused by excess paint in the
interior of the casing burning off from the heat associated with the lamp and will
decrease gradually over time.
Consistent operational breaks will ensure the fixture will function properly for
many years to come.
Use the original packaging and materials to transport the fixture in for service.
8 FUZE WASH Z350™ User Manual
O VERVIEW
www.elationlighting.com
9 FUZE WASH Z350™ User Manual
INSTALLATION
Keep fixture at least 5.0 ft (1.5m) away from any
A qualified electrician should be used for all
www.elationlighting.com
FLAMMABLE MATERIAL WARNING
flammable materials, decorations, pyrotechnics, etc.
ELECTRICAL CONNECTIONS
electrical connections and/or installations.
CAUTIONS
For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
Ambient operating temperature range for this fixture is 5° to 113°F. (-15° to 45°C)
Do not use the fixture under or above this temperature.
Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture.
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or servicing.
10 FUZE WASH Z350™ User Manual
www.elationlighting.com
CLAMP INSTALLATION
The fixture provides a unique mounting assembly (Omega Bracket) that attaches to
the bottom of the base. (See the illustration below). When mounting this fixture to
truss be sure to secure an appropriately rated clamp to the included Omega
Bracket using a M10 screw fitted through the center hole of the Omega Bracket. Be
sure to attach an appropriate Safety Cable (not included) to the fixture using the
safety cable rigging point integrated in the base assembly.
OMEGA BRACKET INSTALLATION
Insert the Omega Bracket into the matching holes on the bottom of the fixture.
Secure the Omega Bracket to the fixture by turning each quick-lock fastener ¼ turn
clockwise; making sure the fastener is completely locked.
SAFETY CABLE RIGGING POINT
11 FUZE WASH Z350™ User Manual
www.elationlighting.com
RIGGING
Overhead rigging requires extensive experience, including amongst others
calculating working load limits, installation material being used, and periodic safety
inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily
injury. Fixture is fully operational in the specific mounting positions illustrated below.
SAFETY CABLE
ALWAYS USE A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT DROP IF THE CLAMP FAILS.
12 FUZE WASH Z350™ User Manual
POWER LINKING
Max number of FUZE WASH Z350 IP™ units power linked together:
3 units @120V | 6 units @240V
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO FUZE WASH Z350™!
POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!
ALWAYS CHECK MAX AMP OUT RATING PRINTED ON THE REAR CONNECTION PANEL!
www.elationlighting.com
OPTIONAL SNOOT INSTALLATION
1. Place fixture on a flat surface and make sure it’s powered OFF.
2. Insert Snoot into fixture head and secure using screws provided. (See image below)
Make sure not to over tighten screws to prevent any issues.
13 FUZE WASH Z350™ User Manual
Software Update
Motor Reset
Please Wait...
www.elationlighting.com
SYSTEM MENU
The fixture comes with an easy to navigate system menu. The control panel (see
image below) located on the front the fixture provides access to the main system
menu and is where all necessary system adjustments are made to the fixture. During
normal operation, pressing MODE button once will access the fixture’s main menu.
Once in the main menu you can navigate through the different functions and
access the sub-menus with the UP, DOWN, RIGHT, and LEFT buttons. Once you reach
a field that requires adjusting, press the ENTER button to activate that field and use
the UP and DOWN buttons to adjust the field. Pressing the ENTER button once more
will confirm your setting. You may exit the main menu at any time without making
any adjustments by pressing the MODE/ESC button.
NOTE: To access the LCD Menu Control Display via the internal battery, press and
hold the DC SWITCH button for 3 seconds. The LCD Menu Control Display will shut
OFF automatically about 1 minute from the last button press.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:
14 FUZE WASH Z350™ User Manual
Please Wait...
ELATION© FUZE WASH Z350™
S Y S T E M M E N U
Features are subject to change without any prior written notice.
MAIN MENU
SUB MENU
OPTIONS / VALUES
DESCRIPTION
Receive
Set DMX Address
001 ~ XXX
DMX Address Setting
Edit A
Edit B
Remote Add
ON/OFF
Set Fixture Address Via DMX Control
NoDMX Mode
Function If NO DMX Detected
Pan Invert
ON / OFF
Pan Reverse Movement
TiltInvert
Tilt Reverse Movement
Pan Degree
630/540
Pan Degree Select
Feedback
Movement Feedback
Move. Spd
Speed 1 ~ 4
Movement Mode Select
Stand By
Stand By Mode
Fan. Set
Head Fan
Auto, High, Low
Fan Speed Set
Backlight
LCD Backlight Shut Off Time
FlipDisplay
ON / OFF
Flip/Reverse LCD Display 180º
Disp Flash
ON / OFF
Display flashes when NO DMX
Dim Curve
Set Dimmer Curve Mode
Temp. C/F
Celsius/Fahrenheit
&3;>3@/BC@3%E7B163BE33<NN
Init. Effect
PAN =XXX
Initial Effect Position
Chan. Value
PAN...
Value of each Channel Displayed
Slave Set
Set Slave Mode Preset
Auto.Pro
Alone, Master
Set Auto Program Mode
DFSE
Restore Factory Settings
Current
XXXX (Hours)
Fixture Run Time From Power ON
Total Time
XXXX (Hours)
Fixture Total Run Time
Last Clear
XXXX (Hours)
Clear Fixture Last Run Time
Clear Last
ON / OFF
Reset Fixture Last Run Time
Temp. Info
Head Temp.
XXX C° / F °
Temperature in Fixture Head
Error Info
Error Record 1 ~ Error Record 10
Display 10 Recent Error Messages
Model. Info
Fuze Wash Z350
Display Model Name
1U01:
≥V1.05
2U01:
≥V1.05
3U01:
≥V1.05
www.elationlighting.com
(Default Settings in BOLD)
User Mode
Function
User Mode
Edit C
Status
LCD. Set
Disp. Set
15CH RGBW, 16CH HSI, 17CH sRGBI,
19CH RGBW, | User A, User B, User C
Max. Chan
:
Chase Fade
Hold / Auto / Blackout
ON / OFF
ON/OFF
OFF, 01M~99M, 15M
02~60m 05m
Key Lock ON / OFF Control Front Panel Buttons Key Lock
Standard, Stage, TV, Architectur, Theatre
Slave 1, Slave 2, Slave 3
Set DMX Channel / User Mode
Edit User Defined
Channel Assignments
Information
Time. Info
Software Version
ON / OFF
Timer PIN PIN= 066 Enter PIN to Access Clear Last. Menu
Software Versions
15 FUZE WASH Z350™ User Manual
ELATION© FUZE WASH Z350™
S Y S T E M M E N U
Features are subject to change without any prior written notice.
MAIN MENU
SUB MENU
OPTIONS / VALUES
DESCRIPTION
Test
Reset. M
Pan&Tilt
Reset of Pan/Tilt Motors
Test. Chan
Test Functions
Panel. Ctrl
Fine Adjustments
Calibrate
Password
Password= 050
Calibration of Motors and LEDs
Auto Pro Part1 = Program 1~9 (Program 1)
Auto Pro Part2 = Program 1~9 (Program 2)
Auto Pro Part3 = Program 1~9 (Program 3)
Program 1
Program Test
Testing Program
:
Step 01=SCxxx
Program In Loop
Program 9
Step 64=SCxxx
Save and Exit
Pan,Tilt,……
Save and Automatically Return
Input By Outside
Stores Scenes via Ext DMX Console
Sce. Input
XX~XX
Automatic Scenes Recorder
(Default Settings in BOLD)
www.elationlighting.com
Program
Select. Pro
Edit. Pro
Edit. Sce
Scene 001
~
Scene 250
--Fade Time--
--Scene Time--
Select Programs To Be Run
Manual Scenes Edit
Function - Status - Remote Add
When ON, define the desired DMX address of fixture via an external controller.
1. Connect the fixture to the external controller and power ON.
2. Set the DMX value of Channel 1 on the controller to (7).
3. Set the DMX value of Channel 2 on the controller to (7) or (8).
When set to (7), the DMX address can be set between (1) and (255).
When set to (8), the DMX address can be set between (256) and (511).
4. Using Channel 3 on the controller set the desired DMX address of the fixture.
Example 1:
If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2 to
a value of (7), and then set Channel 3 to a value of (57).
Example 2:
If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel 2 to
a value of (8), and then set Channel 3 to a value of (164). (256+164=420)
5. After setting Channel 3 to the desired DMX address value, wait for approximately
20 seconds for the fixture to complete the address reset function.
16 FUZE WASH Z350™ User Manual
Function - Dim Curve
Select desired DIMMER MODE (Standard, Stage, TV, Architectural, Theatre).
www.elationlighting.com
Test – Calibrate
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION
This function allows small adjustments to be made to the effect wheels to
compensate for ware or in the event a sensor has been knocked slightly out of
place. Because improper use of this function can result in undesired operation this
function has been password protected. The password is 050 and must be entered
each time the calibration menu function is entered. Because calibration is an
extremely delicate procedure, instructions on performing this action are left out of
this manual. For a first time calibrator, please contact our customer support team for
step-by-step instructions.
17 FUZE WASH Z350™ User Manual
ELATION© FUZE WASH Z350™
DMX Channel Values / Functions Version (19 DMX Channels)
Supports Software Versions: ≥ 1.01
www.elationlighting.com
DMX CHANNEL FUNCTIONS AND VALUES
*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
MODE / CHANNEL
15 RGBW 16 HSI 17 RGBI 19 RGBW
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5
6 6
7 7
8 8
9 5 5
6
7
8
6
7
8 9
VALUE FUNCTION
0-255 PAN Movement 630/540
0-255 Fine Control of PAN Movement
0-255 TILT Movement
0-255 Fine Control of TILT Movement
0-255 0 to 100%
0-255 0 to 100%
0-255 0 to 100%
0-255 0 to 100%
0-31 LED OFF
32-63 LED ON
64-95 Strobe Effect SLOW to FAST
96-127 LED ON
128-159 Pulse Effect in Sequences
160-223 Random Strobe Effect SLOW to FAST
224-255 LED ON
0-255 0 to 100%
0-255 0 to 100%
0-255 0 to 100%
0-255 0-100%
0-255 0-100%
0-255 0-100%
PAN MOVEMENT [8 BIT]
PAN FINE MOVEMENT [16 BIT]
TILT MOVEMENT [8 BIT]
TILT MOVEMENT [16 BIT]
RED
GREEN
BLUE
WHITE
SHUTTER / STROBE
RED
GREEN
BLUE
HUE
SATURATION
INTENSITY
Features are subject to change without any prior written notice.
18 FUZE WASH Z350™ User Manual
ELATION© FUZE WASH Z350™
15 RGBW
16 HSI
17 RGBI
19 RGBW
www.elationlighting.com
DMX Channel Values / Functions Version (19 DMX Channels)
Supports Software Versions: ≥ 1.01
*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
Features are subject to change without any prior written notice.
MODE / CHANNEL
VALUE FUNCTION
9 10 9
0 OFF
1-4 COLOR PRESET 01
5-8 COLOR PRESET 02
9-12 COLOR PRESET 03
13-16 COLOR PRESET 04
17-20 COLOR PRESET 05
21-24 COLOR PRESET 06
25-28 COLOR PRESET 07
29-32 COLOR PRESET 08
33-36 COLOR PRESET 09
37-40 COLOR PRESET 10
41-44 COLOR PRESET 11
45-48 COLOR PRESET 12
49-52 COLOR PRESET 13
53-56 COLOR PRESET 14
57-60 COLOR PRESET 15
61-64 COLOR PRESET 16
65-68 COLOR PRESET 17
69-72 COLOR PRESET 18
73-76 COLOR PRESET 19
77-80 COLOR PRESET 20
81-84 COLOR PRESET 21
85-88 COLOR PRESET 22
89-92 COLOR PRESET 23
93-96 COLOR PRESET 24
97-100 COLOR PRESET 25
101-104 COLOR PRESET 26
105-108 COLOR PRESET 27
109-112 COLOR PRESET 28
113-116 COLOR PRESET 29
117-120 COLOR PRESET 30
121-124 COLOR PRESET 31
125-128 COLOR PRESET 32
COLOR PRESETS
19 FUZE WASH Z350™ User Manual
ELATION© FUZE WASH Z350™
DMX Channel Values / Functions Version (19 DMX Channels)
Supports Software Versions: ≥ 1.01
www.elationlighting.com
*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
Features are subject to change without any prior written notice.
MODE / CHANNEL
15 RGBW 16 HSI 17 RGBI 19 RGBW
9 10 9
VALUE FUNCTION
129-132 COLOR PRESET 33
133-136 COLOR PRESET 34
137-140 COLOR PRESET 35
141-144 COLOR PRESET 36
145-148 COLOR PRESET 37
149-152 COLOR PRESET 38
153-156 COLOR PRESET 39
157-160 COLOR PRESET 40
161-164 COLOR PRESET 41
165-168 COLOR PRESET 42
169-172 COLOR PRESET 43
173-176 COLOR PRESET 44
177-180 COLOR PRESET 45
181-184 COLOR PRESET 46
185-188 COLOR PRESET 47
189-192 COLOR PRESET 48
193-196 COLOR PRESET 49
197-200 COLOR PRESET 50
201-204 COLOR PRESET 51
205-208 COLOR PRESET 52
209-212 COLOR PRESET 53
213-216 COLOR PRESET 54
217-220 COLOR PRESET 55
221-224 COLOR PRESET 56
225-228 COLOR PRESET 57
229-232 COLOR PRESET 58
233-236 COLOR PRESET 59
237-240 COLOR PRESET 60
241-244 COLOR PRESET 61
245-248 COLOR PRESET 62
249-252 COLOR PRESET 63
253-255 COLOR PRESET 64
COLOR PRESETS [continued]
20 FUZE WASH Z350™ User Manual
ELATION© FUZE WASH Z350™
DMX Channel Values / Functions Version (19 DMX Channels)
Supports Software Versions: ≥ 1.01
DIMMER INTENSITY
www.elationlighting.com
*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
Features are subject to change without any prior written notice.
MODE / CHANNEL
15 RGBW 16 HSI 17 RGBI 19 RGBW
10
10 11
11 12
12 10 11 13
11 12 14
12 13 15
13 14 16
13 14 15 17
VALUE FUNCTION
0-31 LED OFF
32-63 LED ON
64-95 Strobe Effect SLOW to FAST
96-127 LED ON
128-159 Pulse Effect in Sequences
160-223 Random Strobe Effect SLOW to FAST
224-255 LED ON
0-255 Dimmer 0 to 100%
0-255 Dimmer FINE Adjustment
0-255 Zoom 0% (5 Degrees) to 100% (50 Degrees)
0 NO FUNCTION
1-20 COLOR MACRO 01
21-40 COLOR MACRO 02
41-60 COLOR MACRO 03
61-80 COLOR MACRO 04
81-100 COLOR MACRO 05
101-120 COLOR MACRO 06
121-140 COLOR MACRO 07
141-160 COLOR MACRO 08
161-180 COLOR MACRO 09
181-200 COLOR MACRO 10
201-230 COLOR MACRO 11
231-240 COLOR MACRO 12
241-250 COLOR MACRO 13
251-255 GRADIENT COLOR MACRO
0-125 Counter-Clockwise Movement FAST to SLOW
126-130 STOP
131-255 Clockwise Movement SLOW to FAST
0-255 0-100%
0-20 STANDARD
21-40 STAGE
41-60 TV
61-80 ARCHITECTURAL
81-100 THEATRE
101-255 Default to Unit Setting
SHUTTER / STROBE
DIMMER INTENSITY FINE
ZOOM
PROGRAM MACROS
PROGRAM MACRO SPEED
PROGRAM MACRO FADE
DIMMING CURVE MODES
21 FUZE WASH Z350™ User Manual
ELATION© FUZE WASH Z350™
DMX Channel Values / Functions Version (19 DMX Channels)
Supports Software Versions: ≥ 1.01
www.elationlighting.com
*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
15 RGBW 16 HSI 17 RGBI 19 RGBW
14 15 16 18
15 16 17 19
Features are subject to change without any prior written notice.
MODE / CHANNEL
VALUE FUNCTION
0-225 MAX to MIN SPEED
226-235 Blackout By Movement
236-255 NO FUNCTION
0-79 Normal
80-84 ALL Motor Reset
85-99 NO FUNCTION
100-119 Internal Program 1 (scene1~8)
120-139 Internal Program 2 (scene9~16)
140-159 Internal Program 3 (scene17~24)
160-179 Internal Program 4 (scene25~32)
180-199 Internal Program 5 (scene33~40)
200-219 Internal Program 6 (scene41~48)
220-239 Internal Program 7 (scene49~56)
240-255 NO FUNCTION
PAN / TILT MOVEMENT SPEED
LAMP ON/OFF, RESET, INTERNAL PROGRAMS
22 FUZE WASH Z350™ User Manual
ERROR CODE
DESCRIPTION
www.elationlighting.com
E RROR CODES
When power is applied, the unit will automatically enter a “Motor Reset” mode,
which brings all the internal motors to a home position. If there is an internal problem
with one or more of the motors, an error code (see below) will flash on the control display.
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing
TILT Er
PAN Er
circuit malfunctions (sensor failed or magnet is missing) or there is a motor
failure (defective motor or defective motor IC drive on main PCB). This error
may also be displayed if the head was blocked during a reset function
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing
circuit malfunctions (sensor failed or magnet is missing) or there is a motor
failure (defective motor or a defective motor IC drive on the main PCB).
This error may also be displayed if the head/yoke was blocked during a
reset function.
23 FUZE WASH Z350™ User Manual
www.elationlighting.com
CLEANING AND MAINTENANCE
CAUTION
Disconnect power before cleaning or maintenance.
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output,
and an extended life. The frequency of cleaning depends on the environment in
which the fixture operates: damp, smoky or particularly dirty environments can
cause greater accumulation of dirt on the fixture’s optics.
Clean the external lens surface at least every 20 days with a soft cloth to avoid
dirt/debris accumulation.
Never use alcohol, solvents, or ammonia based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside this fixture, please refer all other service
issues to an authorized Elation service technician. Should you need any spare parts,
please order genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:
A detailed electric check by an approved electrical engineer every three months,
to make sure the circuit contacts are in good condition and prevent overheating.
Be sure all screws and fasteners are securely tightened at all times. Lose screws may
fall out during normal operation resulting in damage or injury as larger parts could fall.
Check for any deformations on the housing, color lenses, rigging hardware and
rigging points (ceiling, suspension, trussing). Deformations in the housing could
allow for dust to enter into the fixture. Damaged rigging points or unsecured
rigging could cause the fixture to fall and seriously injure a person(s).
Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.
24 FUZE WASH Z350™ User Manual
www.elationlighting.com
TECHNICAL SPECIFICATIONS
SOURCE
350W RGBW COB LEDs
100,000 Hour Average Lamp Life*
*May vary depending on several factors including but not limited to:
Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
COLOR
RGBW
EFFECTS
RGBW Color Mixing
12° - 53° Beam Zoom Range
Electronic Strobe, Dimming and Variable Dimming Curves
64 Color Presets and 14 Unique Color Macros
CONTROL / CONNECTIONS
4 DMX Channel Modes (19 Total Channels)
7 Button Control Panel and LCD Menu Display
RDM (Remote Device Management)
3pin/5pin DMX and powerCON In/Out
SIZE / WEIGHT
Length: 16.3" (414mm)
Width: 11.6" (294mm)
Vertical Height: 18.0" (461mm)
Weight: 43 lbs. (19.5 kg)
ELECTRICAL / THERMAL
AC 100-240V - 50/60Hz
380W Max Power Consumption
5F to 113°F (-15°C to 45°C)
APPROVALS / RATINGS
CE | IP30
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
25 FUZE WASH Z350™ User Manual
PHOTOMETRIC DATA
3 m
9.8 ft
4 m
13.1 ft
5 m
16.4 ft
12° Beam
lux
fc
lux
fc
lux
fc
4,002
372
2,320
216
1,596
148
GREEN
LEDs
BLUE LEDs
2,982
277
1,759
163
1,190
111
WHITE
LEDs
26,240
2,438
15,760
1,464
10,090
937
3 m
9.8 ft
4 m
13.1 ft
5 m
16.4 ft
53° Beam
57° Field
lux
fc
lux
fc
lux
fc
259
24
163
15
117
11
GREEN
BLUE LEDs
196
18
124
12
87
8
WHITE
LEDs
FULL ON
1,672
155
1,024
95
690
64
www.elationlighting.com
MIN ZOOM - 12° Beam Diameter
Diameter
19° Field
Diameter
RED LEDs
FULL ON
Diameter
Diameter
RED LEDs
0.56 1.8
1.04 3.4
9,041 840
14,330 1,331
MAX ZOOM - 53° Beam Diameter
3.08 10.1
3.16 10.4
0.74 2.4
1.39 4.6
5,453 507
8,455 785
4.12 13.5
4.2 13.8
0.47 1.5
1.58 5.2
3,392 315
5,671 527
5.16 16.9
5.24 17.2
LEDs
578 54
930 86
353 33
563 52
248 23
403 37
26 FUZE WASH Z350™ User Manual
DIMENSIONAL DRAWINGS
www.elationlighting.com
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
27 FUZE WASH Z350™ User Manual
DIMENSIONAL DRAWINGS - Optional Snoot Installed
www.elationlighting.com
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
28 FUZE WASH Z350™ User Manual
www.elationlighting.com
OPTIONAL ACCESSORIES
ORDER CODE ITEM
FW350SNOOT FUZE WASH Z350 Snoot
TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp
* * * pending * * * FUZE WASH Z350 Road Case
AC3PDMX5PRO 5 ft. (1.5m) 3pin PRO DMX Cable
AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable
PLC3 3 ft. (1m) PowerCON PRO Link Cable
Additional Cable Lengths Available
29 FUZE WASH Z350™ User Manual
Loading...