Elation ELED Fresnel 150 User Instructions

User Instructions

ELED Fresnel 150 Introduction

Elation Professional - www.elationlighting.com - ELED Fresnel 150 Instruction Manual Page 2

8/12

Unpacking: Thank you for purchasing the ELED Fresnel 150 by Ela-

tion Professional®. Every ELED Fresnel 150 has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship­ping. If the carton appears to be damaged, carefully inspect your x­ture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our customer support number for further
instructions. Do not return this unit to your dealer without rst contact­ing customer support.

Introduction: The ELED Fresnel 150 is part of Elation Profession-

als® continuing pursuit for creating high quality affordable intelligent

fixtures. The ELED Fresnel 150 is a powerful DMX intelligent LED spot.
The unit can be controlled manually or via DMX controller.

Customer Support: ©Elation® provides a customer support line, to

provide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.elationlighting.com for any comments or sugges­tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: [phone]

Fax: [phone]

E-mail: [e-mail]

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact

©Elation customer support.

PLEASE recycle the shipping carton when ever possible.

©Elation Professional®

6122 S. Eastern Ave.

Los Angeles CA. 90040

www.elationlighting.com

ELED Fresnel 150

ELED Fresnel 150 Safety Precautions

Elation Professional - www.elationlighting.com - ELED Fresnel 150 Instruction Manual Page 4Elation Professional - www.elationlighting.com - ELED Fresnel 150 Instruction Manual Page 3

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 10 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu­ d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

ELED Fresnel 150 Warranty Registration

ELED Fresnel 150 Features

To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.

ELED Fresnel 150 General Instructions

• Two Operating Modes: DMX Control & Manual Control

• DMX-512 protocol

• 3 DMX Modes: 1 Channel Mode & 2 x 2 Channel Modes

• Dimming 0-100% in all DMX Channel Modes

• Strobing in 2 Channel Mode 1

• Daisy Chain Units Together in DMX Mode

The ELED Fresnel 150 carries a two year limited warranty. Please fill
out the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief
description of the problem as well as the R.A. number must also be
written down on a piece of paper included in the shipping carton. If
the unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our customer support number. All pack­ages returned to the service department not displaying a R.A. number
on the outside of the package will be returned to the shipper.